HDWR HD10C Automatic Barcode Reader with Stand User Manual
- June 1, 2024
- HDWR
Table of Contents
User Manual
Automatic barcode reader with stand
HD10C
Specification
- Light source: 620nm LED
- Sensor Type: CMOS
- Scanning method: manual (on the button) / automatically (after the code is brought closer)
- Scan confirmation: light and sound signal
- Scanning speed: 200 times/second
- Interface: USB
- Cord length: 140 cm
- Protection level: IP54
- Device dimensions: 16 x 9.5 x 6.5 cm
- Base dimensions: 24 x 12 x 12 cm
- Package dimensions: 18.5 x 12 x 8.5 cm
- Weight: 300 g
- Package weight: 370 g
- Operating temperature: -20 – 50°C
- Storage temperature: -40 – 60°C
- Read 1D codes: EAN-8, EAN-13, UPC-A, UPC-E, CODE 128, CODE 39, CODE 93, CODE 11, CHINESE 2 of 5, CODABAR, MSI, Interleaved 2 of 5 (ITF), others one-dimensional
The set contains:
- Barcode Reader
- Reader stand for self-assembly
- Built-in USB communication cable
- Manual
Features:
- Wired reader for scanning standard barcodes
- Scan codes on LCD, LED/OLED and mobile device displays
- Barcode scanning in automatic mode
- Any character can be programmed before or after the code
Factory reset
Restore default settings
Code Scanning Modes
Manual mode|
Automatic mode
Beep settings
Sound On (default)|
Sound off
Setting trailing characters
CR|
Unmarked
TAB
| LF+CR
Case settings
Uppercase and lowercase letters
| No case conversion
Uppercase letters only|
Lowercase only
Reading inverted codes (on a black background)
Enabled
| Off (default)
Add a prefix and suffix
Add Prefix
| Add a suffix
Cancel prefix|
Anuluj suffix
Save settings
To set a prefix or suffix, first scan the code “Add a prefix” or “Add a suffix”, then scan the appropriate character from the table at the end of this manual, and finally read the code “Save settings”.
Hide barcode characters
Hiding Initial Characters
|
Hide trailing characters
In order to hide individual characters in the barcode, first scan the code
“Hide Leading Characters” or “Hide Trailing Characters” and then read the code
at the end of this manual, corresponding to the number of digits to hide, with
the scanner.
For example, if you want to hide the first two characters of a barcode,
you must first scan the code “Hide Initial Characters”, then scan the code “0”
and “2” from the table.
Character Table
SOH
|
STX
|
ETX
---|---|---
EOT
|
ENQ
|
ACK
BEL
|
Backspace
|
TAB
LF
|
VT
|
FF
CR
|
SO
|
SI
DLE
|
DC1
|
DC2
DC3
|
DC4
|
NAK
SYN
|
ETB
|
CAN
EM
|
SUB
| 
ESC
FS
|
GS
|
RS
US
|
SPACE
|
!
“
|
|
$
%
|
&
| 
‘
(
|
)
|
---|---|---
|
,
|
–
.
|
/
|
0
1
|
2
|
3
4
|
5
|
6
---|---|---
7
|
8
|
9
:
|
;
|
<
=
|
|
?
@
|
A
|
B
C
|
D
|
I
F
|
G
|
H
I
|
J
|
K
L
|
M
|
N
O
|
P
|
Q
---|---|---
R
|
S
|
T
U
|
V
|
W
X
|
Y
|
Z
---|---|---
[
|
\
|
]
^
|
_
|
‘
a
|
b
|
c
d
|
e
|
f
g
|
h
|
i
j
|
k
|
l
m
|
n
|
o
p
|
q
|
R
s
|
t
|
u
v
|
w
|
x
---|---|---
y
|
z
|
{
|
|
}
|
~
Delete
|
F1
|
F2
F3
|
F4
|
F5
F6
|
F7
|
F8
F9
|
F10
|
F11
F12
|
INSERT
|
HOME
Page Up
|
Delete
|
END
Page Down
|
Right arrow
|
Left arrow
Bottom arrow
|
Top arrow
|