hoop Flow Tower Paper Filter Outer Loop Instructions
- September 14, 2024
- hoop
Table of Contents
hoop Flow Tower Paper Filter Outer Loop
Specifications
- Product Name : Hoop
- Weight: [Insert Weight]
- Materials: [Insert Materials]
- Capacity: [Insert Capacity]
- Dimensions: [Insert Dimensions]
Product Usage Instructions
- Grind 15 grams of coffee with a grind size similar to that used for a V60.
- Insert one paper filter at the center of the Outer Loop covering the hole. Ensure only one filter is inserted.
- Screw the Flow Tower securely onto the center of the Outer Loop to lock the paper filter. Tap the filter to ensure it’s tight.
- Wet the paper filter, then place the Hoop on a cup, mug, or server ensuring it lies flat on the vessel.
- Add the 15 grams of ground coffee into the Flow Tower (inner tower).
- Pour 250 grams of boiling water into the Outer Loop all at once.
- Wait for around 4-5 minutes for the water to pass through without agitation or slow pouring.
- If desired, use the Hood to maintain water temperature.
- After brewing, remove the Hoop, position the hood underneath to collect any drops, dispose of grounds and paper filter, and rinse the Hoop under fresh water for reuse.
How to use Hoop
Dear Hoop users,
here you can find some simple instructions to understand how to use Hoop:
-
Grind 15 grams of coffee with a grind size similar to that used for a V60.
-
Insert one paper filter at the center of the Outer Loop covering the hole. The paper filters are very thin, so make sure you insert only one.
-
Screw the Flow Tower securely onto the center of the Outer Loop, to lock the paper filter. Tap the paper filter with your finger to ensure it’s tight.
-
Wet the paper filter, then place the Hoop on a cup, mug or server. Make sure the opening of the vessel is wide enough and that Hoop lies flat on it. Tall mug handles mightprevent the Hoop from lying flat.\
-
Add the 15 grams of ground coffee into the Flow Tower (the inner tower).
-
Pour 250 grams of boiling water into the Outer Loop (you can pour the boiling water all at once).
-
Wait until all the water passes through; this should take around 4-5 minutes (this is a great reference to identify the proper grind size for most grinders). No agitation or slow pouring is needed.
-
Hoop has a Hood now!
If you want to keep the water at the same temperature, you can put the hood on top of the Hoop. -
After the brewing cycle is finished (no water left in the outer loop), remove the Hoop from the vessel and position the hood underneath the Hoop to collect any drops. To dispose of the coffee grounds and paper filter, position the Hoop on top of a trash bin and unscrew the Flow Tower: the coffee will fall into the bin leaving a very small residue. Rinse the Hoop under fresh water to use it again.
Frequently Asked Questions
- Q: How do I clean the Hoop after use?
- A: Rinse the Hoop under fresh water to remove any coffee residue and ensure it’s ready for reuse.
- Q: Can I use any type of paper filter with Hoop?
- A: It is recommended to use the provided paper filters as they are designed specifically for Hoop’s function.
- Q: What should I do if Hoop does not lie flat on my vessel?
- A: Ensure the vessel’s opening is wide enough and there are no obstructions like tall mug handles preventing Hoop from lying flat.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>