ACT AC7840 5x 1 HDMI Switch User Manual
- June 9, 2024
- ACT
Table of Contents
AC7840 5x 1 HDMI Switch
User Manual
Introduction
Congratulations with the purchase of this high-quality ACT product! This
product has undergone extensive testing by ACT’s technical experts. Should you
experience any problems with this product, you are covered by ACT warranty.
Please keep this manual and the receipt in a safe place.
Register your product now on www.act-connectivity.com and receive product updates!
1.1 Packing contents
The following parts need to be present in the packing:
- 5-port HDMI switch
- Power supply DC 5V 1A
- Remote Control
Panel description
- DMI input1 port
- HDMI input ports 2/3/4/5
- Power input
- Indicator of power input
- Input select button
- IR receiver
- Indicator of HDMI input
- Indicator of HDMI output
- HDMI output port
Installation instructions
- Connect the HDMI input sources ( such as Media player, BD/DVD player etc.) to the five HDMI-in ports.
- Connect the HDMI display device (such as HDTV) to the HDMI output port.
- Insert the DC side of 5V power supply to the HDMI switch and connect the AC side of the power supply to the wall outlet.
Connection Diagram 1 (Support 4Kx2K) Remote Control instructions
- Switch between the HDMI sources with the buttons 1/2/3/4/5 With the buttons you can manually switch between the HDMI sources.
The HDMI switch also supports auto sensing which means that the HDMI switch
will automatically detect which port is connected.
Frequently Asked Questions and other related information
The latest Frequently asked questions for your product can be found on the
support page of your product. ACT will update these pages frequently to assure
you have the most recent information. Visit www.act-
connectivity.com for more information about
your product.
Service and support
This user manual has been carefully written by ACT’s technical experts. If you
have problems installing or using the product, please check the support link
at the website www.act-connectivity.com.
Warning and points of attention
Due to laws, directives and regulations set out by the European parliament,
some (wireless) devices could be subject to limitations concerning its use in
certain European member states. In certain European member states the use of
such devices could be prohibited. Contact your (local) government for more
information about this limitations.
Always follow up the instructions in the manual*, especially where it concerns
devices which need to be assembled.
Warning: In most cases this concerns an electronic device. Wrong/improper use
may lead to (severe) injuries!
When you connect the device to the mains, make sure it will not be damaged or
subject to (high) pressure.
A power socket is needed which should be close and easy accessible from the
device.
Repairing of the device should be done by qualified ACT staff. Never try to
repair the device yourself. The warranty immediately voids when products have
undergone selfrepair and/or by misuse.
For extended warranty conditions, please visit our website at www.act-
connectivity.com
Dispose of the device appropriately. Please follow your countries regulation
for the disposal of electronic goods.
Please check below safety points carefully:
- Do not apply external force on the cables
- Do not unplug the device by pulling the power cable
- Do not place the device near heating elements
- Do not let the device come in contact with water of other liquids
- If there is any strange sound, smoke or odor, remove the device immediately from the power outlet.
- Do not put any sharp objects into the venting hole of a product
- Do not use any damaged cables (risk of electric shock)
- Keep the product out of reach of children
- Wipe off the product with soft fabric, not water mop.
- Keep the power plug and outlet clean
- Do not unplug the device form the power outlet with wet hands
- Unplug the device when you don’t use it for a long time
- Use the device at a well ventilated place
*Tip: ACT manuals are written with great care. However, due to new
technological developments it can happen that a printed manual does not longer
contain the most recent information. If you are experiencing any problems with
the printed manual or you cannot find what you are looking for, please always
check our website www.actconnectivity.com
first for the newest updated manual.
Frequently asked questions (FAQ). Consult support on our website
www.actconnectivity.com and s ee if you can
find the right information about your product here.
It is highly advisable to consult the FAQ section first, the answer is often
here.
Warranty conditions
The ACT warranty applies to all ACT products. After buying a second-hand
ACT product the remaining period of warranty is measured from the moment of
purchase by the product’s initial owner. ACT warranty applies to all ACT
products and parts, indissolubly connected or mounted to the product it
concerns. Power supply adapters, batteries, antennas and all other products
not directly integrated in or connected to the main product or products of
which, without reasonable doubt, can be assumed that wear and tear during use
will show a different pattern than the main product, are not covered by the
ACT warranty. Products are not covered by the ACT warranty when exposed to
incorrect/improper use, external influences or when opening the service parts
of the product by parties other than ACT. ACT may use refurbished materials
for repair or replacement of your defective product. ACT cannot be held
responsible for changes in network settings by internet providers. We cannot
guarantee that the ACT networking product will keep working when settings are
changed by the internet providers. ACT cannot guarantee the working of web
services, apps and other third party content that is available through ACT
products
When my product gets defective
Should you encounter a product rendered defective for reasons other than
described above: Please contact your point of purchase for taking care of your
defective product.
www.act-connectivity.com
Trademarks: all brand names are trademarks and/or registered of their
respective holders. The information contained in this document has been
created with the utmost care. No legal rights can be derived from these
contents. ACT cannot be held responsible, nor liable for the information
contained in this document.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>