Hoop Sisters 8Pump Pumpkin Patch Instructions
- September 7, 2024
- Hoop Sisters
Table of Contents
8Pump Pumpkin Patch
“`html
Product Information
Specifications:
- Finished Size: 31 x 31
- Minimum Sewing Field: 8 x 8
- Available Sizes: 5-inch and 8-inch blocks
Description:
The Pumpkin Patch design is filled with cute details and
intricate quilting. The pumpkin blocks feature raw edge applique
finished with pinking shears for a unique look. The layered
applique adds dimension and texture to the pumpkins, while the
quilting patterns resemble leaves and vines found in a pumpkin
patch.
Usage Instructions:
Supply List:
-
Background Fabric: Varies based on block size
-
Fabric 1: Fat Quarter
-
Pumpkin A Fabric: Dark Orange – Fat Quarter
-
Pumpkin B Fabric: Medium Orange – Fat Quarter
-
Pumpkin C Stem Fabric: Light Orange – Fat Quarter or
Scraps -
Border Fabric: Varies based on block size
-
Backing Fabric: Varies based on block size
-
Threads: Polyester Embroidery Threads Recommended
Using the Pumpkin Applique Block:
-
Optional Step: If using wool batting, raise
the presser foot height to avoid catching. Flatten edges of wool
batting and place it inside the placement stitch. Sew a zigzag
stitch using water-soluble thread. -
Align Background A Fabric over the placement and sew tack down
and placement stitches for embroidery using the same thread. -
Continue with the embroidery process as guided in the
instructions for the specific block size.
Frequently Asked Questions (FAQ):
Q: Can I resize the Pumpkin Patch design?
A: The design is available in two sizes, 5-inch and 8-inch
blocks, and it is recommended to use the specified sizes to ensure
proper stitching alignment.
Q: Can I use different colored fabrics for the pumpkins?
A: Yes, you can customize the colors of the pumpkins by using
fabrics of your choice while following the designated fabric
requirements for each part.
“`
Copyright © 2024 HoopSisters
Pumpkin Patch Instructions
5-inch
Finished Size: 19½” x 19½” Requires a minimum sewing field of 5″ x 5″
8-inch
Finished Size: 31″ x 31″ Requires a minimum sewing field of 8″ x 8″
This Pumpkin Patch is bustling with cute details and striking quilting. The
pumpkin blocks feature raw edge applique, finished with a pinking shears,
around the inside curves. The layered applique gives the
pumpkins dimension and texture. In addition to the cute pumpkins, there is
charming quilting reminiscent of leaves and vines you might find in a pumpkin
patch.
Photocopying, digitizing, and all other copying to “share” these instructions is strictly prohibited by law. Thank you for respecting the designer’s copyright.
www.hoopsisters.com
866.497.4068
info@hoopsisters.com
1
Copyright © 2024 HoopSisters
Pumpkin File Preview
File Name: 5Pump or 8Pump File Size: 4.90″ x 4.90″ or 7.76″ x 7.75″
File Name: 5Qltd or 8Qltd File Size: 4.90″ x 4.90″ or 7.76″ x 7.76″
File Name: 5Border or 8Border File Size: 2.45″ x 4.90″ or 3.89″ x 7.75″
File Name: 5Corner or 8Corner File Size: 2.45″ x 2.45″ or 3.89″ x 3.89″
Photocopying, digitizing, and all other copying to “share” these instructions is strictly prohibited by law. Thank you for respecting the designer’s copyright.
www.hoopsisters.com
866.497.4068
info@hoopsisters.com
2
3
info@hoopsisters.com
866.497.4068
Photocopying, digitizing, and all other copying to “share” these instructions is strictly prohibited by law. Thank you for respecting the designer’s copyright.
Copyright © 2024 HoopSisters
Pumpkin Supply List
8-inch Blocks
Approximate Finished Size: 31″ x 31″
File Name
(#) to stitch
Optional Wool Battilizer® Batting
Craft Size
5 yard package*
Background Fabric
3/4 yard
Fabric 1 Fat Quarter
Pumpkin A Fabric
Dark Orange
Fat Quarter
Pumpkin B Fabric
Med. Orange
Fat Quarter
Pumpkin C Stem Fabric Fabric
Light Orange
Fat Quarter Fat Quarter
or Scraps
Border Fabric
2/3 yard
Backing Fabric
1 yard
8Pump (5)
8Qlted (4)
9–7¾” x 7¾”
8Border 12–3″ x 7¾” (12)
25 pieces large enough
to fit your hoop
8Corner 4–3″ x 3″ (4)
5–9″ x 9″
N/A
10–3½” x 5″
8–5¾” x 5¾” 4–6¾” x 6¾”
N/A
5–5½” x 5″ 5–3½” x 5″ 5–2½” x 3¼” N/A
1–32″ x 32″
N/A
12–5″ x 9″
4–5″ x 5″
www.hoopsisters.com
*Amount of Battilizer® varies depending on your hoop size.
Additional Supplies to have on hand: · Binding Fabric–1/3 yard, cut into four
2½” strips x
width of fabric · Trimmer by George 3.0 · HoopScissors Mini
Threads to have on hand:
Polyester Embroidery Threads Recommended
· Thread to match Background Fabric, Border · Embroidery Bobbin Thread Fabric & Stem Fabric
· Thread to coordinate with Pumpkin Fabrics · Vanish Lite Water Soluble Thread
· Thread for pumpkin vines
· MonoPoly Invisible Thread
4
info@hoopsisters.com
866.497.4068
Photocopying, digitizing, and all other copying to “share” these instructions is strictly prohibited by law. Thank you for respecting the designer’s copyright.
Copyright © 2024 HoopSisters
Pumpkin Supply List
5-inch Blocks
Approximate Finished Size: 19½” x 19½”
File Name
(#) to stitch
Optional Wool Battilizer® Batting
Craft Size
5 yard package*
Background Fabric
1/3 yard
Fabric 1 Fat Quarter
Pumpkin A Fabric
Dark Orange
Fat Quarter
Pumpkin B Fabric
Med. Orange
Fat Quarter
Pumpkin C Fabric
Light Orange
Stem Fabric
Fat Quarter Fat Quarter
or Scraps
Border Fabric
1/3 yard
Backing Fabric
2/3 yard
5Pump (5)
5Qlted (4)
5Border (12)
9–4″ x 4″ 12–2½” x 4″
25 pieces large enough
to fit your hoop
5Corner (4)
4–2½” x 2½”
5–6″ x 6″ 8–4″ x 4″
N/A
10–2¾” x 3½” 5–3½” x 4″ 5–2½” x 3½”
4–4½” x 4½”
N/A N/A
5–2″ x 2½” N/A
12–3½” x 6″
1–21″ x 21″
4–3½” x 3½”
www.hoopsisters.com
*Amount of Battilizer® varies depending on your hoop size.
Additional Supplies to have on hand: · Binding Fabric–1/4 yard, cut into three
2½” strips x width of
fabric · Trimmer by George 3.0 · HoopScissors Mini
Threads to have on hand:
Polyester Embroidery Threads Recommended
· Thread to match Background Fabric, Border · Embroidery Bobbin Thread Fabric & Stem Fabric
· Thread to coordinate with Pumpkin Fabrics · Vanish Lite Water Soluble Thread
· Thread for pumpkin vines
· MonoPoly Invisible Thread
Copyright © 2024 HoopSisters
Pumpkin Applique Block
OPTIONAL
Pump
3)
Hoop Battilizer®. Place water soluble thread in the needle and embroidery
bobbin thread in the bobbin and sew the placement stitch onto Battilizer®.
4)
This step is optional. Skip to Step 3 if additional wool batting not being
used.
Raise height of presser foot to skim over wool to avoid it getting caught.
Press edges of wool batting to flatten. Place wool batting inside placement
stitch. Using water soluble thread in the needle, sew the zigzag stitch.
Align Background A Fabric over placement and sew tack down and placement stitch for embroidery using the same thread.
Sew quilting using thread that matches Background A Fabric.
Align Pumpkin A Fabric over placement and sew tack down using thread that
coordinates with Pumpkin Fabrics.
Use HoopScissors Mini to trim scant 1/4″ from tack down along line marked in
red. Leave excess fabric on remaining sides.
Align Pumpkin B Fabric over placement and sew tack down using thread that
coordinates with Pumpkin Fabrics.
Trim scant 1/4″ from tack down along red line. Using the HoopScissors Mini,
cut a line through fabric directly to the notches at the top and bottom (see
arrows) as close to the tack down stitching as possible. Use a pinking shears
to trim approximately 1/4″ from tack down along blue line. Do not trim fabric
along the green line.
Photocopying, digitizing, and all other copying to “share” these instructions is strictly prohibited by law. Thank you for respecting the designer’s copyright.
www.hoopsisters.com
866.497.4068
info@hoopsisters.com
5
Copyright © 2024 HoopSisters
Pumpkin Applique Block Continued
Pump
9)
Continuing with the same thread, sew blanket stitch.
Align Pumpkin C Fabric over placement and sew tack down using thread that
coordinates with Pumpkin Fabrics.
Using the HoopScissors Mini, cut a line through fabric directly to the notches
at the top and bottom (see arrows) as close to the tack down stitching as
possible. Use a pinking shears to trim approximately 1/4″ from tack down along
blue line. Do not trim fabric along the green line.
Continuing with the same thread, sew blanket stitch.
Sew tack down around edges of pumpkin applique using thread that coordinates
with Pumpkin Fabrics.
Use HoopScissors Mini to trim close to tack down stitching on all sides.
Sew satin stitch using same thread.
Align Stem Fabric over placement and sew tack down using thread that matches
Stem Fabric.
Use HoopScissors Mini to trim close to tack down stitching around all sides.
Photocopying, digitizing, and all other copying to “share” these instructions is strictly prohibited by law. Thank you for respecting the designer’s copyright.
www.hoopsisters.com
866.497.4068
info@hoopsisters.com
6
Copyright © 2024 HoopSisters
Pumpkin Applique Block Continued
Pump
Sew satin stitch using thread that matches Stem Fabric.
Sew vines using green thread.
Photocopying, digitizing, and all other copying to “share” these instructions is strictly prohibited by law. Thank you for respecting the designer’s copyright.
www.hoopsisters.com
866.497.4068
info@hoopsisters.com
7
Copyright © 2024 HoopSisters
Quilted Stitch-and-Flip Block
OPTIONAL
Qltd
3)
Hoop Battilizer®. Place water soluble thread in the needle and embroidery
bobbin thread in the bobbin and sew the placement stitch onto Battilizer®.
4)
This step is optional. Skip to Step 3 if additional wool batting not being
used.
Raise height of presser foot to skim over wool to avoid it getting caught.
Press edges of wool batting to flatten. Place wool batting inside placement
stitch. Using water soluble thread in the needle, sew the zigzag stitch.
Continuing with the same thread, sew placement stitch.
Align Fabric 1 over placement and sew tack down using the same thread.
Place Backround Fabric (triangle) right side down, raw edges approximately
even with Fabric 1. Sew seam using a neutral colored thread.
Flip Background A Fabric right side up, finger press and smooth out.
Place Backround Fabric (triangle) right side down, raw edges approximately
even with Fabric 1. Sew seam using a neutral colored thread.
Flip Background A Fabric right side up, finger press and smooth out.
Photocopying, digitizing, and all other copying to “share” these instructions is strictly prohibited by law. Thank you for respecting the designer’s copyright.
www.hoopsisters.com
866.497.4068
info@hoopsisters.com
8
Copyright © 2024 HoopSisters
Quilted Pumpkin Block Continued
QltPump
9)
Place Backround Fabric (triangle) right side down, raw edges approximately
even with Fabric 1. Sew seam using a neutral colored thread.
Flip Background A Fabric right side up, finger press and smooth out.
Place Backround Fabric (triangle) right side down, raw edges approximately
even with Fabric 1. Sew seam using a neutral colored thread.
Flip Background A Fabric right side up, finger press and smooth out.
Make sure Background A Fabric is flipped right side up and smoothed out in each corner. Sew tack down using water soluble thread.
Sew quilting using thread that matches Background A Fabric.
Sew quilting pumpkin using thread color of your choice.
Photocopying, digitizing, and all other copying to “share” these instructions is strictly prohibited by law. Thank you for respecting the designer’s copyright.
www.hoopsisters.com
866.497.4068
info@hoopsisters.com
9
Copyright © 2024 HoopSisters
Border Block
Border
3)
OPTIONAL
Hoop Battilizer®. Place water soluble thread in the needle and embroidery
bobbin thread in the bobbin and sew the placement stitch onto Battilizer®.
4)
This step is optional. Skip to Step 3 if additional wool batting not being
used.
Raise height of presser foot to skim over wool to avoid it getting caught.
Press edges of wool batting to flatten. Place wool batting inside placement
stitch. Using water soluble thread in the needle, sew the zigzag stitch.
5)
Align Border Fabric over placement and sew tack down using water soluble thread.
Sew quilting using thread color of your choice.
Sew quilting using thread that matches Border Fabric.
Photocopying, digitizing, and all other copying to “share” these instructions is strictly prohibited by law. Thank you for respecting the designer’s copyright.
www.hoopsisters.com
866.497.4068
info@hoopsisters.com
10
Copyright © 2024 HoopSisters
Corners Block
Corner
3)
OPTIONAL
Hoop Battilizer®. Place water soluble thread in the needle and embroidery
bobbin thread in the bobbin and sew the placement stitch onto Battilizer®.
4)
This step is optional. Skip to Step 3 if additional wool batting not being
used.
Raise height of presser foot to skim over wool to avoid it getting caught.
Press edges of wool batting to flatten. Place wool batting inside placement
stitch. Using water soluble thread in the needle, sew the zigzag stitch.
Align Border Fabric over placement and sew tack down using water soluble thread.
Sew quilting using thread color of your choice.
Photocopying, digitizing, and all other copying to “share” these instructions is strictly prohibited by law. Thank you for respecting the designer’s copyright.
www.hoopsisters.com
866.497.4068
info@hoopsisters.com
11
Copyright © 2024 HoopSisters
Trimming
Blue–Use Trimmer by George 3.0 to remove Battilizer up to basting stitch.
Fabric on the front of the block will be trimmed 1/4″ from basting stitches.
Red–Trim 1/4″ from basting stitches through all layers.
Scan with any QR reader to learn how to use the Trimmer by George 3.0!
Photocopying, digitizing, and all other copying to “share” these instructions is strictly prohibited by law. Thank you for respecting the designer’s copyright.
www.hoopsisters.com
866.497.4068
info@hoopsisters.com
12
Copyright © 2024 HoopSisters
Assembly
· Join blocks in Row 1 together, pressing seams in one direction. · Join
blocks in Row 2 together, pressing seams in the opposite direction of Row 1. ·
Continue joining blocks in Rows 3, 4 and 5 together, alternating direction
seams are pressed. · Join Row 1 to Row 2, pressing seam to one side. · Join
Row 3 to Row 4, pressing seam to one side. · Join Row 4 to Row 5, pressing
seam to one side. · Join the two sets of Rows together, pressing seam to one
side.
Row 1
Row 2
Row 3
Row 4
Row 5
Photocopying, digitizing, and all other copying to “share” these instructions is strictly prohibited by law. Thank you for respecting the designer’s copyright.
www.hoopsisters.com
866.497.4068
info@hoopsisters.com
13
Copyright © 2024 HoopSisters
Assembly
· Place Backing Fabric right side down on a hard surface, taping edges to keep
taut and hold in place. Place wall hanging right side up, centered over
Backing Fabric.
· Use a quilt basting spray or quilting safety pins, pinning in several
places, avoiding seams. · Place clear Mono.Poly thread in the needle and
bobbin. Beginning with center seam, stitch in the
ditch. Continue stitching in the ditch between remaining rows until all seams
have been quilted. · Using a longer basting stitch, baste the outside edge of
the quilt. · Trim Backing Fabric even with quilt. · Cut 2½” strips for
binding, join strips end to end using a diagonal seam. Add sleeve and bind
wall
hanging.
Photocopying, digitizing, and all other copying to “share” these instructions is strictly prohibited by law. Thank you for respecting the designer’s copyright.
www.hoopsisters.com
866.497.4068
info@hoopsisters.com
14