CARAUDIO-SYSTEMS OBD-302-R Rear View Camera OBD Coder User Manual
- September 14, 2024
- CARAUDIO-SYSTEMS
Table of Contents
CARAUDIO-SYSTEMS OBD-302-R Rear View Camera OBD Coder
Delivery contents
Take down the SW-version and HW-version of the interface boxes, and store this manual for support purposes.
Legal Information
Changes/updates of the vehicle’s software can cause malfunctions of the interface. We offer free software-updates for our interfaces for one year after purchase. To receive a free update, the interface must be sent in at own cost. Labor cost for and other expenses involved with the software-updates will not be refunded.
Check compatibility of vehicle and accessories
Requirements
Vehicle| Volkswagen T6.1, Tiguan facelift as of 2020, Passat facelift as of
2019
---|---
Navigation| MIB3 system – Composition Media, Discover Media, Discover Pro
Limitations
| After market rear-view Camera | Only compatible with NTSC-cameras. |
|---|---|
| Installations hinweis | The MIB3 system has a switch-off delay for the camera |
level. Therefore, the power supply connection of the reversing camera must be
made at the ignition plus (not all cameras are suitable for this). We
recommend the plug & play set “RL-MIB3-2” for unsuitable cameras.
License| The OBD-coder can only be used in one vehicle (after use in a vehicle
the using in other vehicles is blocked).
Installation
- Open vehicle hood
- Locate OBD-port and remove cover
- Turn on ignition (pos. 2, do not start engine)
- Wait until the head-unit has booted
- Plug coder into OBD-port
- Leave coder for about 30 seconds in OBD-port
- Remove coder from the OBD-port
To reverse the coding repeat steps 2.-7.
Note: After the first use on a vehicle, the coder OBD-302-R is personalized to this vehicle (head-unit) and can be used unlimited times to code or reverse coding on this vehicle.
Rear-view camera video connection
The video cable included in the set is connected to the MIB3 Quadlock connector:
| Cable color | Assignment |
|---|---|
| Colored (video) | Chamber B – Pin 6 |
| Black (ground) | Chamber B – Pin 12 |
LED information:
| LED | Status | Explication |
|---|---|---|
| Blue | Flashes | Coding process is running |
| Green | Lights | Coding procedure successfully completed |
| Red | Lights | Remove coding procedure successfully completed |
| Flashes | Coding process failed / license violation | |
| Green + Red | Lights | CAN Communication Error! – Abort of the diagnostic |
session
Legal disclaimer: Mentioned company and trademarks, as well as product names/codes are registered trademarks ® of their corresponding legal owners.
Technical Support
Caraudio-Systems Vertriebs GmbH Manufacturer / Distributor
In den Fuchslöchern 3 D-67240 Bobenheim-Roxheim
Email: support@caraudio-systems.de
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>