Alcatel-Lucent Enterprise AH80 Bluetooth Headset User Manual

: September 14, 2024
: Alcatel-Lucent Enterprise

Table of Contents

Alcatel-Lucent Enterprise AH80 Bluetooth Headset
Product Information
FAQ
Introduction
Headset overview
Accessories
Connection
Wearing the headset
Charging
Using the headset
Indicator lights
Support
Maintenance
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Alcatel-Lucent Enterprise AH80 Bluetooth Headset

Product Information

Specifications

Model: AH80 Bluetooth Headset
Languages: Portuguese and Italian
Charging Time: Approximately 2 hours via USB cable, 2.5 hours via wireless charging
Talk Time: Up to 35 hours
Playback Time: Up to 45 hours
Charger Recommendation: DC 5V 1A for USB charging, Qi-certified wireless charger for wireless charging

FAQ

Q: How long does it take to fully charge the headset?
A: It takes approximately 2 hours to fully charge the headset via USB cable and 2.5 hours via wireless charging.
Q: What is the recommended charger for the headset?
A: It is recommended to use a DC 5V 1A charger for USB charging and a Qi- certified wireless charger for wireless charging.

Introduction

Thank you for purchasing the Alcatel-Lucent Enterprise AH80 Bluetooth Headset. We hope you enjoy it.
This User Manual will get you started and help you make the most of your headset.

Features

HD audio technology & cVc noise cancellation
Retractable microphone boom
Up to 45 hours battery life & wireless charging capability
Advanced Active Noise Cancellation (ANC) and transparency mode for you to hear your surroundings better
Bluetooth connection range of up to 75 meters (laboratory data)
Compatibility with mainstream Unified Communications (UC) platforms and deskphones
Multi-language voice prompts supported: Chinese, English, French, German, Spanish, Portuguese and Italian

Headset overview

Accessories

Make sure you have the following items in the package with your headset:

Note: The actual product may differ in appearance from the images shown.

Connection

Connecting AH80 to your PC, deskphone or smartphone/tablet.

**USB Dongle

** Plug the USB dongle into your PC or deskphone and slide the switch to the middle position to power on AH80. AH80 will connect with the dongle automatically.

Bluetooth

Slide the switch to the end position and hold for 2~3s to power on AH80 and enter pairing mode. Then, power on Bluetooth on your Bluetooth device and select AH80 for pairing.

3.5mm Aux Cable

When AH80 runs out of power, you can also connect via a 3.5mm aux cable to listen to music or for communication.
Note: If you connect a 3.5mm aux cable into AH80 in powered-on state, AH80 will enter into powered-off state when you can use it as a wired headset. To use Bluetooth, you will need to unplug the 3.5mm cable, slide the switch to the OFF position and then turn it back on.

Wearing the headset

Adjust the headband to make a comfortable fit for your head.

The microphone boom is retractable. You can pull it out closer to your mouth to achieve optimal sound and hide it when listening to music or watching movies.

Charging

Plug the Type-C connector at one end of the USB cable into AH80 and the Type-A connector into the charger or PC. It takes approximately 2 hours to fully charge the headset. It is recommended to use a DC 5V 1A charger.

Wireless charging

Put the left earphone onto the wireless charging base. It takes approximately 2.5 hours to fully charge the headset. It is recommended to use a Qi-certified wireless charger.

Note: When fully charged, the headset provides around 35 hours of talk time and up to 45 hours of playback time.

Using the headset

Call handling

Answering / Rejecting a call
When there is an incoming call, you can control it via the multi-function button (MFB) on the right earphone.

Answer a call: Press the MFB
Reject a call: Press twice the MFB

Ending / Holding a call

While on a call, you can

end a call: Press the MFB
hold/Resume a call: Hold the MFB for 1 second

Mute on / off

During on a call, you can

mute / unmute your microphone: Press the Mute button

Status light change / off
While on a call, you can switch the status light between red, blue and off. When needed, you can use red light to indicate busy state and blue light to indicate available state. The headset saves and remembers last output state of the status light after power off.

Change/Turn off the status light: Hold the Mute button for 2 seconds (Red/Blue/Off)

Handling multiple calls

While there are multiple incoming calls, you can

end the current call to accept the incoming one/end the incoming call and resume the call on hold: Press the MFB
reject the incoming call: Press twice the MFB
put the current call on hold and answer the incoming one/put the incoming one on hold and resume the original call: Hold the MFB for 1 second

Activating voice assistant

In idle state, you can
activate your voice assistant (e.g. Siri, Google Assistant or Alexa): Hold the MFB for 1 second

Music mode

Play/Pause music: Press the MFB
Volume up: Tap the Volume + area
Volume down: Tap the Volume – area
Previous track: Press and hold the Volume – area for 1 second
Next track: Press and hold the Volume + area for 1 second

Settings

ANC / Transparency mode
You can control the ANC mode and switch to transparency mode via the ANC button. In transparency mode, you can hear the world around you without taking off your headset.

ANC mode on / transparency mode on / ANC mode off: Press the ANC button

Customizing prompt languages
The headset supports multiple voice prompt languages, including Chinese, English, French, German, Spanish, Portuguese and Italian. To switch between languages, press the MFB and ANC button simultaneously for over 2 seconds.

Restoring factory settings

Factory reset the headset: Press both the Mute button and the ANC button simultaneously for more than 6 seconds

Checking the battery level
When the headset is powered on and no Bluetooth device is connected, you can check the battery level by listening to the voice prompt.

Listen to remaining battery percentage voice prompt: Press the MFB

Indicator lights

Support

The ALE Go app helps you boost your headset performance through regular firmware updates.

Maintenance

Please store your headset in the carry case that it came in when not in use.
To prevent battery depletion, please avoid storing your headset in a too hot or too cold environment (e.g. in the car in summer or winter).
Keep the headset from getting wet. If the headset gets wet, leave it long enough to dry fully before powering it on.
It is recommended to keep the headset at a temperature between -10°C and 45°C (23°F and 113°F).
Do not store the headset for long periods of time without charging. It is advisable to charge the battery at least once every six months to maintain its performance.

Warning

Do not listen at high volume levels for long periods.

www.al-enterprise.com The Alcatel-Lucent name and logo are trademarks of Nokia used under licence by ALE. To view other trademarks used by affiliated companies of ALE Holding, visit: www.al- enterprise.com/en/legal/trademarks-copyright. All other trademarks are the property of their respective owners. The information presented is subject to change without notice. Neither ALE Holding nor any of its affiliates assumes any responsibility for inaccuracies contained herein. © Copyright 2024 ALE International, ALE USA Inc. All rights reserved in all countries.