CMA DISHMACHINES CMA-180 Maxwell Food Equipment Installation Guide

September 13, 2024
CMA Dishmachines

CMA DISHMACHINES CMA-180 Maxwell Food Equipment

MODELS CMA -180/180T ALL Including 480V MACHINES
PARTS MANUAL
Rev 2.09 06-01-23

CMA DISH MACHINES
12700 KNOTT AVENUE
GARDEN GROVE, CALIFORNIA 92841 800-854-6417
FAX 714-895-2141
www.cmadishmachines.com
Buy Parts

Parts Manual

Initial Parts Kit #1100.17

P/N DESCRIPTION Qty
00121.18 CMA-180 Drain Stopper O-ring 1
00200.10 Pump Assy. 115/220V 60Hz (Open) 1
00206.30 Pump Seal Kit 1
00304.29 Rinse Arm w/ Bearings 1
00307.20 Spray Arm Assy CMA180 w/ bearing & end plugs 1
00363.00 Spray Base Pull Lock Pin 1
00404.85 Contactor 208/240V 20 Amp DP 1
00411.00 Micro Switch 1
00421.78 Illuminated Plug CMA-180/44 P 1
00421.90 Power Switch Red 250V 1
00475.70 Toggle Switch DPDT 15 Amp/Delimer 1
00501.17 Timer Motor Assy 60 Sec 220V/60Hz 1
00562.00 Roller Door Switch 1
00602.00 Door Spring 1
00631.05 Ice Cube Relay 220V 12 Amp 1
00706.00 3/4 Water Solenoid Repair Kit JE 1
00735.00 3/4 Vac Breaker Rep Kit Watts 1
00738.15 Solenoid Coil JE 220V (3/4 & 1/2) 1
03202.00 Thermometer (Capillary) 1
03408.55 Counter – Face Mount 220V/50Hz 1
03470.00 Toggle Switch (Momentary) Screw Term 1
13003.17 Contactor 60 Amp 3 Pole 1
13003.55 Contactor 30 Amp 1
13304.55 SS Final Rinse Spray Jet SS 1
13417.92 Heater Thermostat 1
13422.71 Immersion Heater 208-240V/12kW T-Flange 1
13463.14 Liquid Level Switch-Long-D Flat 1
13605.00 Pressure Gauge 1
15518.00 Immersion Heater 6kW208-240V T-Flange 1
17523.51 Hi Limit Switch 250 Deg 1

Exploded View Drawings

Straight Frame System Assembly

ITEM NO.| NO. REQ’D| P/N| DESCRIPTION| | ITEM NO.| NO. REQ’D| P/N| DESCRIPTION
---|---|---|---|---|---|---|---|---
1| 1| 17532.17| CMA-180 Frame Stand| 18| 30| 00912.00| ¼”-20 Nylon Lock Nut
2| 1| 00535.30| Front door Handle| 19| 4| 01310.00| Bullet Feet
3| 3| 01506.08| Door, Oval W/ Dimple| 20| 1| 17521.50| Wash Tank Heater Cover Poly Pro
4| 6| 00636.15| E Z Door Glide| 21| 1| 17521.20| Booster Heater Cover Poly Pro
5| 6| 17554.00| Door Guide| 22| 23| 00914.10| 1/4-20 X 5/8 Hex Bolt
6| 2| 17552.00| Door Stop| 23| 1| 17530.17| CMA-180 Wrapper
7| 1| 13915.60| Door Latch Bracket| 24| 1| 17531.17| Pan
8| 1| 13701.00| Open Door Latch| 25| 2| 17506.60| Door Panel Splash Guard
9| 1| 01505.02| Tray Track (Set)| 25A| 1| 17506.65| Door Service Splash Guard
10| 2| 17510.00| Strainer Basket| 26&27| 2| 17506.21| Front Door Safety Bracket
11| 1| 01577.10| Scrap Tray Body| 28| 1| 00960.00| 8-32×1-1/2” Panhead Screw
12| 1| 01577.21| Scrap Trap Drawer| 29| 1| 00927.00| 8-32 Nylon Lock Nut
13| 1| 17579.00| Scrap Trap Holder| 30| 2| 00962.00| 1/4-20 X 1 SS Hex Bolt
14| 1| 17511.00| Overflow| 31| 4| 00610.00| Door Handle Spacer (Small)
15| 1| 17402.00| Overflow Gasket| 32| 1| 01577.30| S/S Scrap Trap Lid
16| 30| 00905.00| ¼-20 x 1/2 Trus Bolt| 33| 1| 17506.62| 180 Splash Shield – lever side
17| 60| 00924.00| ¼” SS Washer|

Corner Frame Assembly

ITEM

NO.

| NO.

REQ’D

| P/N| DESCRIPTION| | ITEM

NO.

| NO.

REQ’D

| P/N| DESCRIPTION
---|---|---|---|---|---|---|---|---
1| 1| 17532.17| CMA-180 Frame Stand| 14| 1| 17511.00| Overflow
2| 1| 17506.50| Door Panel Corner| 15| 1| 17402.00| Overflow Gasket
3| 2| 01506.08| Door, Oval W/ Dimple| 16| 24| 00906.00| ¼”-20 x 1/2” Hex Head Bolt
4| 4| 00636.15| E Z Door Glide| 17| 56| 00924.00| ¼” SS Washer
5| 4| 17554.00| Door Guide| 18| 30| 00912.00| ¼”-20 Nylon Lock Nut
6| 2| 17552.00| Door Stop| 19| 4| 01310.00| Bullet Feet
7| 1| 17507.20| Air Gap Baffle| 20| 1| 17521.50| Wash Tank,Heater Cover Poly
8| 4| 00905.00| ¼” – 20 x ½ Truss Head Bolt| 21| 1| 17521.20| Booster Heater Cover Poly Pro
9| 1| 01505.10| Tray Track| 22| 1| 01505.16| Tray Track Rail
10| 2| 17510.00| Strainer Basket| 23| 2| 00941.00| 8/32” x 5/8” Pan Head Screw
11| 1| 01577.10| Scrap Trap Body| 24| 2| 03801.00| 10/32” Lock Nut
12| 1| 01577.21| Scrap Trap Drawer| 25| 1| 17530.17| CMA-180 Wrapper
13| 1| 17579.00| Scrap Trap Holder| 26| 1| 17531.17| Pan
| 27| 1| 01577.30| S/S Scrap Trap Lid

Drain System Assembly

ITEM

NO.

| NO.

REQ’D

| P/N| DESCRIPTION| | ITEM

NO.

| NO.

REQ’D

| P/N| DESCRIPTION
---|---|---|---|---|---|---|---|---
1| 1| 00113.17| Drain Tee Casting| 11| 6| 00901.00| 5/16 –18×1” Hex Head Bolt
2| 1| 00114.00| Drain Tee Gasket| 12| 6| 13805.00| 5/16-18 Nylon Lock Nut
3| 1| 00121.18| Drain Stopper “O” Ring| 13| 1| 01313.00| 2” PVC Slip x MIPT Adapter
*4| 1| 00121.17| Drain Stopper (Incl O-Ring)| 14| 1| 05030.17| 2” x 4” PVC Tubing
5| 1| 17581.00| Drain Linkage| 15| 1| 01312.00| PVC Slip x Slip 90 Elbow
6| 1| 17580.50| Drain Linkage Spacer| 16| 1| 05030.27| 2” x 6” PVC Tubing
7| 1| 00912.00| ¼-20 Nylon Lock Nut| 17| 1| 01320.17| 2” PVC Tee
8| 1| 17580.00| Drain Lever| 18| 1| 05030.10| 2” x 3” PVC Tubing
9| 1| 00910.00| ¼”-20×1 ½” Hex Head Bolt| 19| 1| 01315.17| 2” No Hub
10| 16| 00926.00| 5/16 S/S Washer|

Plumbing System Assembly

ITEM

NO.

| NO.

REQ’D

| P/N| DESCRIPTION| | ITEM

NO.

| NO.

REQ’D

| P/N| DESCRIPTION
---|---|---|---|---|---|---|---|---
1| 1| 00710.50| Vacuum Breaker ¾” Watts| 12| 1| 13029.00| Strainer Ball Valve 3/4”
1A| —| 00421.51| Pan Head Screw SS 6-32 x 1/4”| 13| —| 13028.00| ¾” Ball Valve Repair Kit
1B| —| 00735.60| Vacuum Breaker Brass Bonnet| 14| 2| 13635.10| Nipple Brass 2/4” x 2”
1C| —| 00735.00| Vacuum Breaker Repair Kit ¾”| 15| 4| 00742.00| Nipple ½” x 1 ½”
1D| —| 00739.50| Vacuum Breaker Cap| 16| 1| 13607.50| Final Rinse Plumbing
2| 3| 13639.00| Nipple SS ¾” Close| 17| 1| 00770.20| 5/8 Compression Ftg. Ring
3| 3| 13633.00| Elbow FXF Brass ¾”| 18| 1| 00770.10| 5/8 Compression Ftg. Nut
4| 1| 13613.00| Nipple ¾” x 5 ½” Brass| 19| –| 00705.05| Water Sol Valve ¾” 220V JE
5| 2| 13606.10| Jamb Nut Brass ¾”| 19A| –| 00706.00| Water Sol Repair Kit JE ¾”
6| 1| 13602.20| Pressure Regulator ½”| 19B| –| 00705.20| Water Sol Valve Bonnet ¾”
7| 1| 00716.10| Brass Tee ¾” x ¾” x ½” FXFXF| 20| 1| 17534.00| 180 Thermometer Bracket
8| 1| 13604.00| Bushing ½” x ¼” Brass| 21| 1| 03202.00| Thermometer “Wash”
9| 1| 13605.00| Pressure Gauge| 22| 1| 03202.18| Thermometer “Rinse”
10| 1| 03603.15| Water Sol Valve 1/2” 220V JE-C| 23| 4| 01526.10| Plumbing Bracket Strap
11A| 1| 00738.15| Water Sol Valve Coil 220V| 24| 4| 00912.00| 1/4-20 Nylon Lock Nut
11B| —| 03603.20| Water Sol Valve Bonnet ½”| 25| 8| 00912.00| 1/4-20 Nylon Lock Nut
11C| —| 00786.00| Water Sol Plunger G Style| 26| 2| 01526.00| Plumbing Support Bracket
11D| —| 00707.00| Water Sol Repair Kit JE ½”|

Plumbing System Assembly Starting May 2023

ITEM

NO.

| NO.

REQ’D

| P/N| DESCRIPTION
---|---|---|---
1| 1| 03624.00| Vacuum Breaker 1/2” Watts
1A| —| 00421.51| Pan Head Screw SS 6-32 x 1/4”
1B| —| 03624.25| Vacuum Breaker Brass Bonnet
1C| —| 03623.00| Vacuum Breaker Repair Kit 1/2”
1D| —| 00739.50| Vacuum Breaker Cap
2| 3| 03614.00| Nipple Brass 1/2” Close
3| 3| 41030.10| Elbow FxF Brass 1/2”
4| 1| 00747.10| Nipple 1/2” x 5” Brass
5| 2| 00721.20| Jamb Nut Brass 1/2”
6| 1| 13602.20| Pressure Regulator ½”
7| 1| 00743.10| Brass Tee 1/2”x1/2”x1/2” FxFxF
9| 1| 40112.00| 1/4 Comp x 1/4 MIP Elbow
10| 1| 03603.15| Water Sol Valve 1/2” 220V JE-C
11A| 1| 00738.15| Water Sol Valve Coil 220V
11B| —| 03603.20| Water Sol Valve Bonnet ½”
11C| —| 00786.00| Water Sol Plunger G Style
11D| —| 00707.00| Water Sol Repair Kit JE ½”
ITEM

NO.

| NO.

REQ’D

| P/N| DESCRIPTION
---|---|---|---
12| 1| 41062.00| Strainer Ball Valve 1/2”
14| 2| 00780.00| Nipple Brass 1/2” x 2 1/2”
15| 2| 00742.00| Nipple ½” x 1 ½”
16| 1| 13607.50| Final Rinse Plumbing
17| 1| 00770.20| 5/8 Compression Ftg. Ring
18| 1| 00770.10| 5/8 Compression Ftg. Nut
23| 4| 01526.10| Plumbing Bracket Strap
24 & 25| 12| 00912.00| 1/4-20 Nylon Lock Nut
26| 2| 01526.00| Plumbing Support Bracket

Wash Spray System

ITEM

NO.

| NO.

REQ’D

| P/N| DESCRIPTION
---|---|---|---
1| 1| 00303.17| Manifold
*2| 1| 00360.24| Lower Spray Base Assembly
3| 1| 00361.10| Upper Spray Base Assembly
4| 2| 00304.17| Wash Spray Arm
5| 4| 00308.50| Spray Arm End Plug SS
6| 2| 00302.51| Spray Base “O” Ring
7| 4| 00905.00| Truss Head Bolt ¼”-20”x1/2”
8| 12| 00924.00| SS Washer ¼”
ITEM**

NO.

| NO.

REQ’D

| P/N| DESCRIPTION
---|---|---|---
9| 8| 00912.00| Nylon Lock Nut ¼” – 20
10| 4| 00914.10| Hex Head Bolt ¼”-20”x5/8”
11| 2| 00966.10| Hex Head SS Bolt 10-32
12| 4| 00363.00| Spray Base Lock Pin
13| 1| 00302.00| Spray Base Gasket
14| 1| 00225.00| Compression Gasket
15| 1| 00221.20| 1” Comp. Fit.x1”MIP SS
16| 1| 00759.17| Base Quick Release W/Nipple
17| 2| 00341.00| Spray Arm Bearing

*P/N 00361.10 Includes Items 11,12 & 6
P/N 00360.24 Includes Items 11, 12 & 6

Final Rinse System

ITEM

NO.

| NO.

REQ’D

| P/N| DESCRIPTION| | ITEM

NO.

| NO.

REQ’D

| P/N| DESCRIPTION
---|---|---|---|---|---|---|---|---
1| 1| 03624.00| ½” Vacuum Breaker Watts| 10| 1| 13306.17| Final Rinse Elbow Assy.
1A| —| 03623.00| ½” Vacuum Brkr Kit- Watts| 11| 2| 04306.00| Square Manifold Gasket
1B| —| 03624.25| ½” Brass Bonnet| 12| 1| 17550.10| Inlet Booster Heater Plumbing
1C| —| 00739.50| ¾” Vacuum Breaker Cap SS| 13| 1| 17401.00| Final Rinse Manifold
1D| —| 00421.51| 6-32 x ¼” SS Pan Head Screw| 14| 1| 13642.00| ½” Brass Plug
2| 1| 05004.10| 3/8” SS Tubing| 15| 1| 00743.10| ½” Tee F x F x F
3| 1| 13607.10| 3/8” Comp x ½” MIP Elbow| 16| 4| 00308.17| Rinse Arm SS End Plug
3A| 1| 00436.20| Comp Fitting Nut| 17| 2| 00304.29| Rinse Arm w/Bearing
4| 2| 04305.17| Bearing Gasket| 18| 4| 00929.00| 1/4-20 X 3/4 Bolt
5| 1| 17550.11| Outlet Booster Heater Plumbing| 19| 8| 00926.00| SS Washer 5/16”
6| 1| 13629.00| ½” S.S. Close Nipple| 20| 4| 00912.00| ¼”-20 Nylon Lock Nut
7| 1| 13629.82| Nipple SS ½” x 5 ½”| 21| 1| 13607.00| Water Inlet
8| 2| 05007.17| 5/8” OD .049 Wall Tubing| 22| 1| 13607.20| Comp Fitting Sleve
8A*| 1| 00797.17| Booster Heater Bypass Line| 23| 1| 13607.30| Water Inlet L.T.
9| 1| 13669.45| Mixing Chamber SS| 24| 1| 00760.00| 5/8 Comp x ½ MIP Adapter
9A| 2| 03232.00| 1/8” Male Plug|

*8A replace 8 only on the machines without booster heater.

CMA-180 Door Handle Assembly

ITEM

NO.

| NO.

REQ’D

| P/N| DESCRIPTION| | ITEM

NO.

| NO.

REQ’D

| P/N| DESCRIPTION
---|---|---|---|---|---|---|---|---
1| 1| 00613.32| Door Handle| 13| 4| 00610.00| Door Handle Spacer (Small)
2| 1| 01556.50| Right Door Handle Support| 14| 4| 00611.00| Door Handle Spacer (Large)
3| 2| 00603.07| Door Spring Extension Rod| 15| 2| 00607.04| Door Handle Cap
4| 2| 00602.00| Door Spring| 16| 1| 01555.50| Left Door Handle Support
5| 2| 17552.00| Door Stop| 17| 2| 00910.00| ¼”-20×1/2” Hex Head Bolt
6| 2| 01553.00| Door Handle Link| 18| 1| 00563.40| Door Switch Bracket (8-08)
7| 2| 00606.50| Turn Buckle| 19| 1| 00563.42| Door Switch Actuator (8-08)
8| 2| 00926.00| 5/16” SS Washer| 20| 1| 00562.00| Door Roller Switch
9| 2| 00900.00| Cotter Pin| 21| 1| 00562.60| Connector Door Roller Switch
10| 4| 00906.00| ¼”-20 x ½” Hex Head screw| 22| 1| 00605.30| Door Rod Spacer
11| 8| 00924.00| ¼” SS Washer| 23| 1| 00546.00| 18 AWG Switch Cord
12| 8| 00912.00| ¼”-20” Nylon Insert Lock Nut|

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

CMA Dishmachines User Manuals

Related Manuals