BluDento B2 Bluetooth DAC Receiver User Guide

June 3, 2024
BluDento

B2 Bluetooth DAC Receiver
User Guide

BLUETOOTH PAIRING WITH NFC

The NFC function of your device allows you to easily connect and share your music.

  1. Ensure that the B1 is plugged in and receiving power.
  2. In Settings, confirm that NFC is ON
  3. Tap your NFC-enabled device to the NFC home spot on the B1; click YES if asked to connect. The LED on the Bluetooth receiver will stay lit while connected.
  4. The Bluetooth service on your device will turn on and will pair automatically with the receiver.
  5. To disconnect just tap the phone on the Bluetooth receiver, the LED on the Bluetooth receiver will flash slowly when disconnected.

BLUETOOTH PAIRING FOR ALL DEVICES

For non-NFC capable devices, ensure that the B1 is plugged in and receiving power. Turn on the Bluetooth service on your device and make sure your device is within range  of your receiver. You should see the receiver appear in the list of Bluetooth devices and select connect. The LED indicator on the front panel should be solid. B1 can connect  to two devices at a time, however it will remember up to six devices.

PAIR AND CONNECT

  1. Go to Settings to turn on Bluetooth
  2. A list of Bluetooth devices will appear
  3. Tap on “B1”
  4. Click YES if asked to connect

TO DISCONNECT

  1. Go to Settings and into your Bluetooth settings
  2. A list of Bluetooth devices will appear
  3. Tap on “B1”
  4. Click YES if asked to disconnect, the LED on the Bluetooth receiver will flash slowly when disconnected

PLAY MUSIC

Your B1 is now connected and ready to play music. Just play music on your device as you normally would and the sound will come out of your HiFi system. If you move out  of range or turn off the Bluetooth feature on your audio device the wireless music receiver will disconnect from your device. To reconnect, simply turn the Bluetooth feature  back on or move within 33 feet (line of sight) of the Bluetooth music receiver.

Your B1 is now connected and ready to play music. Just play music on your device as you normally would and the sound will come out of your HiFi system. If you move out  of range or turn off the Bluetooth feature on your audio device the wireless music receiver will disconnect from your device. To reconnect, simply turn the Bluetooth feature  back on or move within 33 feet (line of sight) of the Bluetooth music receiver.

UNDERSTANDING THE LEDs

  1. Flashes once every 3 seconds:
    Power is ON / pairing in progress waiting for connection;

  2. Solid blue light: Connected / device and Bluetooth receiver are connected

HOW TO PAIR 2 PHONES?

  1. Power on BluDento Bluetooth receiver
  2. Enable Bluetooth on the 1st phone, search and connect to “B1”
  3. After pairing successfully, disable Bluetooth on the 1st phone. BluDento will enter pairing mode again.
  4. Pair BluDento to the 2nd phone by the same way.
  5. After pairing successfully, enable Bluetooth on the 1st phone, click to connect “B1” again.
  6. Now both 2 phones are connected to BluDento.
    Note: Only 1 phone can play at the same time, you have to pause the other.

FEATURES:

  • NFC quick link
  • aptX superior audio codec: CD quality sound
  • Analog output: stereo Left/Right RCA
  • Digital SPDIF outputs both TOSLINK optical and coaxial
  • Auto reconnection supported
  • Link loss reconnection enabled
  • Low latency fast streaming
  • Desktop version plug & play; no battery
  • Micro USB power port

SPECIFICATIONS:

  • Bluetooth distance: up to 33ft
  • DAC Tl PCM5102A (PCM interface 32bit/384KHz; SNR 112dB)
  • Frequency response: 10Hz ~ 20KHz
  • aptX low latency: 30ms
  • Power supply 5V DC (not included)
  • Optical transmission speed up to 16Mbps
  • Optical transmission distance: up to 20m
  • Dimensions: 3.0 x 3.0 x 1.0 inch
  • Color: black

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

BluDento User Manuals

Related Manuals