BluDento BLT-HD True Hi-Fi BT Music Receiver User Manual
- June 5, 2024
- BluDento
Table of Contents
BLT-HD True Hi-Fi BT Music Receiver
User Manual
WELCOME
Congratulations on your purchase of the BluDento BLT-HD True Hi-Fi BT Music Receiver. The following pages explain the features and operation of the BLT- HD. Please take a few moments to read this user guide.
Also read all safety instructions before proceeding. The answers to most setup and performance questions can be found in this guide. If you have any further questions about the operation or use of this product, please contact our the customer care team for assistance at eshop@bludento.com
OVERVIEW
Enjoy a limitless universe of high-definition digital music through your
existing Hi-Fi audio system. BLT-HD streams the highest quality audio
wirelessly from your BT-enabled device to any music system or powered
speakers.
BLT-HD is a true high fidelity component that uses high-end Qualcomm®aptX™ HD
/ AAC / SBC audio streaming codecs and audiophile-grade DAC to unleash all the
clarity, crispness and full emotional impact your Hi-Fi stereo system can
deliver. Unlike standard BT receivers, BLT-HD provides ultimate wireless
freedom with the longest wireless range.
IN THE BOX
- BluDento BLT-HD
- 2RCA to 2RCA Stereo Audio Cable
- 3.5mm to 2RCA Stereo Audio adapter
- USB to micro USB Cable
- TOSLINK optical audio cable
- User Guide
NOT included:
- Coaxial audio cable
- Power plug USB 5V DC (0.2A – 3.0A )
QUICK SETUP
Setup and pairing is really easy. The following instructions will help you
connect
BLT-HD to your music system and pair with your tablet, computer, or
smartphone.
STEP 1: Connect audio cables from the BLT-HD rear panel to your music system
audio input.
STEP 2: Connect a power adapter (excluded) to BLT-HD with the included power
supply cable and plug the power adapter (excluded) into an AC outlet.
BLT-HD will automatically go into pairing mode. The LED light will start
flashing to indicate the unit is now ready to be paired.
STEP 3: Turn ON BT on your device and go to BT preferences.
STEP 4: Scan listed BT devices and select “BLT-HD” to pair and connect. The
LED indicator should turn solid.
STEP 5: Make sure your Hi-Fi audio system is turned on and the proper input
source is selected.
STEP 6: The music on your smart device will now play through your Hi-Fi audio
system.
Disconnect BLT-HD from a paired device and put it back into pairing mode.
Repeat Steps 3 to 6 to add additional devices. BLT-HD can connect to TWO smart
devices at a time but is capable of remembering up to 8 devices.
HOW TO PAIR TWO PHONES
- Power on BluDento Bluetooth receiver
- Enable Bluetooth on the 1st phone, search and connect to “BLT-HD”
- After pairing successfully, disable Bluetooth on the 1st phone. BluDento will enter pairing mode again.
- Pair BluDento to the 2nd phone in the same way.
- After pairing successfully, enable Bluetooth on the 1st phone, and click to connect “BLT-HD” again.
- Now both 2 phones are connected to BluDento.
NOTE: Only 1 phone can play at a time, you have to pause the other.
Don’t worry. Your BluDento BLT-HD is covered under our warranty. For warranty
information please visit: http://bludento.com/contact-bludento/
www.bludento.com
eshop@bludento.com
SAFETY INSTRUCTIONS
- Keep the product dry to avoid affecting the interior circuitry of the product.
- High temperatures will shorten the life of the electronic device.
- Don’t expose to extreme temperatures, it may damage the internal circuit board.
- Don’t drop the product.
- Don’t put the product in direct sunlight or place in hot areas.
- Don’t use chemicals or detergents to clean the product.
- Don’t take the product apart or the warranty will be voided.
- Using the product at excessive volumes may cause permanent hearing damage. You can get the most out of your equipment and enjoy the great audio performance even at safe levels.
- Due to isolating characteristics of the product, do not use the product at excessive volume while driving or in any other activity where failure to hear surrounding sounds could be dangerous.
TROUBLESHOOTING TIPS
My device does not pair with BLT-HD.
- Ensure that BT is turned ON on your device.
- Make sure that the LED indicator is blinking and your device is as close to BLT-HD as possible.
- Restart the BLT-HD and cycle BT on your device in order to re-establish the connection.
The LED Indicator is solid, but I cannot connect my device.
- Check whether no other devices are connected. If so, either disconnect or turn off BT on the other devices till it flashes, then tries connecting.
- Close the BT function of all your BT devices and open them again.
The sound quality is poor and/or the audio is cutting out.
- Move your device or BLT-HD away from cordless phones, routers, microwave ovens, or other BT devices.
- Try moving your device closer to BLT-HD.
- Turn off your device’s Wi-Fi.
- Try unpairing and repairing your device to BLT-HD.
- Check that your device’s OS is updated to the latest version.
Only one channel plays music.
- Check the cables between BLT-HD and your stereo system.
- Check your BT device, music player APP, and home theater to ensure that the audio balance is centered. If you have any further queries please contact us at eshop@bludento.com
The LED indicator is solid and my device is connected but there is no audio output.
- Ensure that the BLT-HD output is correctly connected to your audio system.
- Check whether the audio source is correctly selected on your music system (Analog audio or digital optical/coaxial input).
- Verify the volume levels on your BT device, player APP, and home theater. Please confirm all are not mute
- Try unpairing and repairing your device to BLT-HD.
The volume output level from BLT-HD is Low.
- Verify the volume levels on your BT device, player APP.
- Also, check the volume levels on your powered speakers or stereo system. Please confirm all are not on mute.
TECHNICAL SPECIFICATIONS
BT Version: 5.0 with aptX HD
Supported Codecs: aptX, aptX Low Latency, aptX HD, SBC, AAC, MP3, FLAC,
TFF.
BT Range: 30 meters, 100 feet
Input: BT
Outputs: Stereo Analog RCA; Digital Optical & Coaxial (SPDIF)
Input Power: Power Requirement: DC 5V (USB), 200mA (Min), 3A (Max)
Output Voltage: 2.1 Volts RMS
Output Impedance: 57 Ohms
D/A Converter: TI PCM5102A
Frequency Response: 10Hz – 20kHz (+/- 0.5dB)
Signal to Noise Ratio: 112dB
Total Harmonic Distortion: + Noise < 0.02%
Latency: ~30 milliseconds (MS)
Enclosure: Aluminum + ABS
To reduce the risk of electric shock
Do not remove cover (or back).
No user-serviceable parts inside.
Refer servicing to qualified service personnel.
PRODUCT SAFETY
When used in a directed manner, this unit has been designed and manufactured to ensure your personal safety. Improper use of this product can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use. Keep these instructions handy for future reference.
Users of this product are cautioned not to make modifications or changes that are not approved by BluDento, Inc. Doing so may void the compliance of this product and may result in the loss of the user’s authority to operate the equipment.
Included Accessories:
- RCA – RCA Audio Cable
- RCA – 3.5mm Audio adapter
- USB – micro USB Cable
- TOSLINK optical audio cable
- User Guide
NOT included:
- Coaxial audio cable
- Power plug USB 5V DC(0.2A – 3.0A)
FCC WARNING
FCC ID: 2A5CM-BLT-HD
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF exposure guidelines, This equipment should be installed and operated with a minimum distance of 20cm from the radiator of your body: Use only the supplied antenna.
©2022 BluDento, Inc. All Rights Reserved.
Qualcomm aptX is a product of Qualcomm Technologies, Inc. and/or its
subsidiaries. Qualcomm is a trademark of Qualcomm Incorporated, registered in
the United States and other countries. aptX is a trademark of Qualcomm
Technologies International, Ltd., registered in the United States and other
countries.
DESIGNED IN AUSTRALIA
MADE IN CHINA
BLUDENTO INC.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>