BluDento T1 USB Bluetooth Audio Transmitter User Manual
- June 10, 2024
- BluDento
Table of Contents
BluDento T1 USB Bluetooth Audio Transmitter
T1 USB BLUETOOTH AUDIO TRANSMITTER
Add Bluetooth functionality to your computer or gaming console
USER MANUAL
Congratulations on your purchase of the BluDento T1 USB Bluetooth Audio Transmitter. This page explain the features and operation of the T1. Please read this user guide carefully.
FEATURES
The Latest QUALCOMM Bluetooth 5.2: more stable, more reliable
Rich Audio Codecs Supported: aptX Adaptive, aptX Low Latency, aptX HD,
aptX, SBC, AAC
Hassle-Free Set Up: No Driver Installation Needed, Plug & Play
SPECIFICATIONS
BT Version: BT 5.2
Chipset: QCC3040
Operating Range (open field): 10m / 32.8ft
Working Currency: 8mA
USB Interface: USB 2.0 / 3.0
Operating System Supported: PS4/PS5, Windows, Nintendo Switch, Linux,
Xbox One, Mac
Use Together with: Bluetooth Headphones, Speakers
LED STATUS INDICATOR
| STATUS | LED |
|---|---|
| Connected (aptX Adaptive mode) | Solid RED light |
| Connected (aptX Low Latency mode) | Solid BLUE light, RED light flashes twice |
every 5 seconds
Connected (aptX HD mode)| Solid GREEN light
Connected (aptX mode)| Solid BLUE light, GREEN light flashes twice every 5
seconds
Connected (SBC mode)| Solid BLUE light
Pairing Mode:| Flash BLUE and RED quickly
Reconnect:| Flash BLUE slowly
No Power / Connected device’s Bluetooth being TURNED OFF| No LED light
IMPORTANT NOTICE
-
NO BLUETOOTH icon will appear on the Taskbar when the
T1 is plugged into your PC. It should be recognized as a USB sound card / USB speaker. The pairing/connection happen through the T1, not your computer. -
This device does NOT work with mouse, keyboards or game controllers. It is for audio transmission only. For minimum audio delay, please ensure that your Bluetooth headphones/ speaker supports aptX Low Latency. Otherwise you will get 150~250ms delay.
-
Please turn off all other Bluetooth devices when pairing.
LED STATUS INDICATOR
CONNECT TO BLUETOOTH HEADPHONES
- Plug the T1 into your computer, the LED will flash BLUE & RED quickly (PAIRING MODE) or BLUE slowly (AUTO RECONNECTION).
- Enter your headphones/speakers into PAIRING MODE – please refer to your headphone or speaker’s user manual.
- Keep the two devices close and wait. Once connected, the T1 LED will stay solid BLUE.
FOR MUSIC STREAMING ONLY
Windows: Set T1 as default playback device via sound setting.
MacBook / PS4: Select T1 as Sound Output device.
RECONNECT TO BLUETOOTH DEVICES
The T1 will reconnect to the most recently connected device once that device
has been switched ON.
TROUBLESHOOTING
- Why is the T1 not working/being recognized by my computer? The T1 should be recognized as a USB sound card / USB speaker when it’s plugged into a PC USB port. NO BLUETOOTH icon will appear on the Taskbar. The pairing/connection between the T1 and your headphones/speakers has nothing to do with your PC.
- After it’s plugged in, you can find the “T1″in device manager and in the playback settings.
- If you see an “unknown device” indicated in Device Manager, please try using another computer to test.
- Why didn’t I get expected operation range? Any obstacle can hinder the range; please make sure that the T1 is in line-of-sight with your paired device.
- Bluetooth connection can be negatively affected by other wireless devices such as WiFi router or TV stick. Please try to keep them away.
- If the connection is unstable, please try resetting the devices and pair again.
WARRANTY
Don’t worry. Your BluDento T1 is covered under our warranty. For warranty information please visit: http://bludento.com/contact-bludento/
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>