Seguro 280 Temperature and Humidity Monitor User Guide
- June 3, 2024
- SEGURO
Table of Contents
280 Temperature and Humidity Monitor
User Guide 
280 Temperature and Humidity Monitor
Seguro 280
Temperature and Humidity Monitor
Quick Start Guide
For more detailed information on using the app, go to:
sensified.io/280qs
Getting the App
To configure the Seguro 280 and start monitoring, you’ll need to install the
app on your phone. To do this, tap the Seguro 280 with your phone. This will
display a web page (you may need to tap the notification on the phone first).
The web page will include a button that will take you to the relevant app
store (Apple or Android) to install the app. Once the app is installed,
tapping the device with your phone will take you to the Seguro app.
This device complies with Part 15 of the FCC Rules (FCC ID: 2A3LI-SP03). The
full FCC compliance statement can be found under “Regulatory” in the Seguro
app.
Setting Up an Account
-
Tap the “Cloud Account” button on the home screen, which will display a browser window with the Seguro authentication site.
-
Tap the “Sign up” link (under the Continue button).
-
On the signup page, you can choose between using your Google or Apple ID to log in, or creating a sensified.io account with a new email and password. If you choose to use a third-party identity provider (Apple or Google), only your basic profile information (name, email, language preference and picture) are used.
Connecting to the Device
For Android Devices:
Once the Seguro app is installed, simply touch the Seguro device to the back
of the phone (usually near the top of the phone) and the app will open
automatically, then the device screen will open.
For Apple (iOS) Devices:
Open the Seguro app, and tap the Connect to Device button on the home screen.
A “Ready to Scan” window will appear at the bottom of the screen. Hold the
Seguro device next to the back of the phone until the phone beeps and/or
vibrates.
The exact location of the NFC reader in the phone may vary somewhat, but it is
usually near the top of the phone. Once the app recognizes the device, the
Device screen will open.
Configuring the Device
Once you have the app and have set up your account, you can configure the
device for monitoring.
First, let the system know where the device is located, what equipment it’s
monitoring, and, optionally, what zone. If the location is a room and you’re
monitoring the room itself, you can use “Ambient” for the equipment name. The
zone is useful for larger equipment, such as walk-in coolers, as well as
larger rooms.
Set the minimum and maximum temperatures for the device. These define the
limits of the acceptable temperature range, and are used to set the flashing
indicator on the device, as well as alerts if a Seguro gateway is used.
Setting the device to Private will allow only users in your account or
organization to view the current and historical temperature and humidity.
Otherwise, that information will be available to anyone via a mobile phone
“tap” at the device, or a gateway display.
When all of the options have been selected, tap the Start button to start
monitoring.
Viewing the History
Once the device is actively monitoring, you can view the history at any time simply by tapping the device with your phone. If your phone has the app installed, the information will be displayed in the app. Otherwise, a web page will be displayed with the history information.
Pausing Monitoring
In order to change the minimum and maximum temperatures, you will need to
pause monitoring on the device. You may also want to pause monitoring if the
equipment is being moved or cleaned, so that the over temp period is not
recorded and no alerts are sent.
Tap the Pause button to pause the recording, and the Resume button to
resume it.
Note that only the owner of the device will be able to pause monitoring, and
only when they are signed into their account on the Seguro app. ****
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>