nVent CSBCS0150 Clevis Bolt Spacer Owner’s Manual
- September 14, 2024
- nVent
Table of Contents
CSBCS0150 Clevis Bolt Spacer
Product Specifications:
- Material: Steel
- Finish: Electrogalvanized
- Pipe Size: 1 1/2
- Width (W): 1.71
- Height (H): 0.51
- Thickness (T): 0.07
- Depth (D): 0.51
Product Usage Instructions:
Installation:
-
Ensure you have the appropriate tools for installation,
including wrenches and any necessary hardware. -
Identify the location where the clevis bolt spacer will be
installed on the 1 1/2-inch pipe. -
Place the spacer over the pipe, ensuring it is aligned
correctly with the pipe size and dimensions. -
Tighten the bolt securely to hold the spacer in place, but do
not overtighten to avoid damaging the pipe or the spacer. -
Check the installation to ensure the spacer is securely
attached and does not move when pressure is applied.
Maintenance:
Regularly inspect the clevis bolt spacer for any signs of wear,
corrosion, or damage. If any issues are found, replace the spacer
immediately to prevent malfunction or injury.
Removal:
-
Loosen the bolt holding the spacer in place using the
appropriate tools. -
Carefully slide the spacer off the pipe once the bolt is
sufficiently loosened. -
Inspect the pipe for any damage that may have occurred during
the use of the spacer.
Frequently Asked Questions (FAQ):
Q: Can this clevis bolt spacer be used for pipes of other
sizes?
A: No, this clevis bolt spacer is specifically designed for use
with 1 1/2-inch pipes. Using it with pipes of different sizes may
result in improper fit and potential safety hazards.
Q: How can I contact nVent for further assistance or
support?
A: You can reach out to nVent customer service representatives
through the provided contact numbers specific to your region.
Additionally, product instruction sheets are available on the nVent
website for reference.
CLEVIS BOLT SPACER, 1 1/2″ PIPE
CATALOG NUMBER
CSBCS0150
FEATURES
Seismically braces the 401 Clevis Hanger series for lateral load Retrofit
ability allows the spacer to be installed after the clevis and pipe are
installed Ears easily pinch closed around the clevis hanger cross bolt with
pliers FM® Specification Tested (up to 8″ Pipe Size)
PRODUCT ATTRIBUTES
Material: Steel Finish: Electrogalvanized Pipe Size: 1 1/2″ Width (W): 1.71″
Height (H): 0.51″ Thickness (T): 0.07″ Depth (D): 0.51″
DIAGRAMS
WARNING
nVent products shall be installed and used only as indicated in nVent’s
product instruction sheets and training materials. Instruction sheets are
available at www.nvent.com and from your nVent customer service
representative. Improper installation, misuse, misapplication or other failure
to completely follow nVent’s instructions and warnings may cause product
malfunction, property damage, serious bodily injury and death and/or void your
warranty.
North America +1.800.753.9221 Option 1 Customer Care Option 2 Technical Support
Europe Netherlands: +31 800-0200135 France: +33 800 901 793
Europe Germany: 800 1890272 Other Countries: +31 13 5835404
APAC Shanghai: + 86 21 2412 1618/19 Sydney: +61 2 9751 8500
Our powerful portfolio of brands:
nVent.com CADDY ERICO HOFFMAN RAYCHEM SCHROFF
TRACER
© 2024 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of
2
their respective owners.
nVent reserves the right to change specifications without notice.
References
- Building a more Sustainable and Electrified World | nVent
- Building a more Sustainable and Electrified World | nVent
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>