nVent 6TIBGBSF Rod Hanger with Nail Gun Bracket Owner’s Manual
- September 12, 2024
- nVent
Table of Contents
nVent 6TIBGBSF Rod Hanger with Nail Gun Bracket
Specifications
- Catalog Number: 6TIBGBSF
- Material: Steel; Spring Steel; Nylon
- Finish: nVent CADDY Armour; Electro galvanized
- Rod Size (RS): 3/8
- Height (H): 2.35 inches
- Width (W): 2.31 inches
- A: 1.42
- Static Load (F): 100lb
Product Features
- Suspends threaded rod without the need for additional hardware
- Complete with concrete nail gun insert bracket
- Clips onto nozzle of gas or battery-actuated nail guns allowing for hands-off installation at structure or from the floor using a pole
- Longer leg angle bracket for tool clearance
- Quickly and easily attaches to concrete, steel, or composite metal decking
Product Usage Instructions
- Ensure the area where you will be installing the rod hanger is clear and safe.
- Attach the nail gun bracket to the threaded rod hanger securely.
- If using a gas or battery-actuated nail gun, clip the rod hanger onto the nozzle of the nail gun.
- For hands-off installation, you can use a pole to position the rod hanger accurately.
- Make sure the rod hanger is correctly aligned before activating the nail gun to secure it in place.
- For concrete, steel, or composite metal decking, follow the specific attachment instructions provided.
Frequently Asked Questions (FAQ)
Q: Can the rod hanger be used for heavy-duty applications?
A: The rod hanger is designed to support up to a static load of 100lb, making
it suitable for various applications.
THREAD INSTALL ROD HANGER WITH NAIL GUN BRACKET, 3/8″ ROD
CATALOG NUMBER
6TIBGBSF
FEATURES
- Suspends threaded rod without the need for additional hardware
- Complete with concrete nail gun insert bracket
- Clips onto nozzle of gas or battery-actuated nail guns allowing for hands-off installation at structure or from the floor using a pole
- Longer leg angle bracket for tool clearance
- Quickly and easily attaches to concrete, steel or composite metal decking
PRODUCT ATTRIBUTES
- Material: Steel;Spring Steel;Nylon
- Finish: nVent CADDY Armour;Electro galvanized
- Rod Size (RS): 3/8″
- Height (H): 2.35″
- Width (W): 2.31″
- A: 1.42″
- Static Load (F): 100lb
ADDITIONAL PRODUCT DETAILS
Static Load represents the static load of the nail gun insert assembly. Please
consult with the nail manufacturer to evaluate the static load of the nail and
type of concrete used for the installation. Maximum load is the lesser of the
static load from the nail manufacturer or the published load for the assembly.
Nail gun insert is compatible with BeA® CN60-688ES, Hilti® BX 3, GX 3, DEWALT®
Trak-It C3, SPIT® PULSA 40E, 800E, 700, 1000 or equivalent nailers.
DIAGRAMS
WARNING
nVent products shall be installed and used only as indicated in nVent’s
product instruction sheets and training materials. Instruction sheets are
available at www.nvent.com and from your nVent
customer service representative. Improper installation, misuse, misapplication
or other failure to completely follow nVent’s instructions and warnings may
cause product malfunction, property damage, serious bodily injury and death
and/or void your warranty.
North America
+1.800.753.9221
Option 1 – Customer Care Option 2 – Technical Support
Europe Netherlands :
+31 800-0200135 France:
+33 800 901 793
Europe Germany:
800 1890272 Other Countries: +31 13 5835404
APAC Shanghai:
+ 86 21 2412 1618/19 Sydney:
+61 2 9751 8500
© 2024 nVent. All nVent marks and logos are owned or licensed by nVent
Services GmbH or its affiliates. All other trademarks are the property of
their respective owners.
nVent reserves the right to change specifications without notice.
References
- Building a more Sustainable and Electrified World | nVent
- Building a more Sustainable and Electrified World | nVent
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>