INTERMATIC AG Series Surge Protective Devices Owner’s Manual
- September 12, 2024
- Intermatic
Table of Contents
INTERMATIC AG Series Surge Protective Devices
Product Information
Specifications:
- Model: AG Series Surge Protective Devices
- Designed for: Type 1 and Type 2 applications
- CSA Listed to : ANSI/UL1449 3rd edition
- Approved for: Outdoor applications
Features
- Designed for various applications including outdoor installations
- Available in different models with different voltage protection ratings
- CSA listed for safety compliance
Usage Instructions
Type 1 Applications:
Type 1 applications include outdoor installations before service entrances
and utility meter cabinets. For Type 1 installations, consider models such as
AG24013 or AG2401C3.
Type 2 Applications:
Type 2 applications include installations after service entrances. For Type
2 installations, consider models such as AG2083C3 or AG48013.
Installation:
- Identify the appropriate model based on the application type and voltage requirements.
- Ensure proper wiring configurations as specified in the user manual.
- Mount the surge protective device in a suitable location following safety guidelines.
FAQ
-
What are the recommended applications for the AG Series Surge Protective Devices?
The AG Series is approved for outdoor applications including irrigation equipment, farm equipment, pumps, lighting fixtures, traffic signaling devices, HVACR controls, and motors. -
Are there different models available for different voltage requirements?
Yes, the AG Series offers various models with different service voltages and configurations to suit different applications.
INTRODUCTION
The AG Series Surge Protective Devices (SPD) are designed for a variety of Type 1 and Type 2 applications. Type 1 applications include outdoor installations before service entrances and utility meter cabinets. Type 2 applications include installations after service entrances. CSA listed to ANSI/UL1449 3rd edition, the AG series is approved for outdoor applications including: irrigation equipment, farm equipment, pumps, lighting fixtures, traffic signaling devices, HVACR controls, and motors.
Features
- UV resistant polycarbonate housing with ½” nominal nipple
- 18″ leads; AG6503L3 – 36″ leads
- Type 4 outdoor rainproof enclosure
- Green LED indicates surge protective status
- SPD Type 1 and/or Type 2 applications
- Limited 1-year warranty
Ratings
See Table Below
Specification
The Surge Protective Device shall be listed by CSA to ANSI/UL 1449 3rd Edition for SPD Type 1 and Type 2 locations. The Surge Protective Device shall provide protection between each phase conductor and ground. The Maximum Continuous Operating Voltage (MCOV) shall be a minimum of VAC between phase and ground. When subjected to the ANSI/UL 1449 3rd Edition testing impulses, the Voltage Protection Rating shall be no greater than Volts Line to Neutral/Ground or Volts Line to Line. The Surge Protective device shall employ large MOV technology and provide individual component thermal protection and monitoring, utilizing a green LED status indicator light. The failure of a single component will turn the LED OFF. The rainproof housing shall be constructed of UV resistant polycarbonate, or material of equal strength and UV resistance, and tested to Type 4 standards for outdoor use. A 1⁄2 inch polycarbonate threaded nipple and metal locknut shall be provided. Leads shall be 12 gauge minimum and 24 inches in length. The Surge Protective Device shall carry a 1-year warranty and be manufactured by a company who has engaged in the manufacture of such products for a minimum of 5 years.
Diagrams
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>