KUASSA Efektor DL3606 Delay Owner’s Manual
- June 3, 2024
- KUASSA
Table of Contents
KUASSA Efektor DL3606 Delay
Thank you for choosing Kuassa products!
We encourage you to take the time to read this User Manual thoroughly to
ensure trouble free and proper operation of the software. Delay. It’s probably
one of the most essential effects in audio processing, even before widely used
in music. It all started in the 1940s, where studio engineers utilized
multiple tape machines to create repeats of a signal for creative uses. Along
with the advancement of technology, this particular kind of efffect is still
developed continuously with more features, new sounds, and modern routing
possibilities. On the other hand, many players still seek for classic delay
sound that can be heard on a great number of timeless records. In the path to
complete our line of Efektor plugins, Kuassa present the Efektor DL3606 Delay.
Efektor DL3606 brings five most common types of delay effect to your DAW,
complete with modulation parameter to add life and movement to the repeats or
echoes. Started from utilizing multiple tape recorders, oil can electrostatic
units, portable tape delay machines, to rack units and compact delay pedals;
Kuassa Efektor DL3606 Delay provides 5 types of delay at your disposal.
Key Features
- 5 popular delay types:
- Digital: Clean and clear, with wide frequency range.
- Analog: Dark and mushy, inspired by the bucket brigade delay pedals Lo-Fi: Grainy and dirty, lower bitrate with reduced frequency range Tape: Simulated the warm and lush sound of vintage tape units Reverse: Repeats the signal backward for ethereal and ambient effect
- Modulation section with individual Rate and Depth controls
- Separate Wet and Dry controls
- BPM sync
- Photorealistic graphics for lifelike guitar-playing experience
- Straightforward and easy-to-use interface
- CV Inputs for Automation (Rack Extension only)
System Requirements
Windows:
- Windows Vista or Later (64-bit)
- Core2 Duo, or AMD Phenom ii X4 or better (latest Intel i3, AMD A4, or better is recommended) with 4GB minimum RAM
- VST or VST3 compatible host/DAW
- Pro Tools 11 or later for AAX format
- Propellerhead Reason 7.1 or later for Rack Extension format
Macintosh:
- Mac OS 10.11 or later (64 Bit).
- Core2 Duo, or better (latest Intel i3 recommended)
- with 4GB minimum RAM
- Native Apple Silicon support
- VST, VST3, or Audio Units compatible host/DAW
- Pro Tools 11 or later for AAX format
- Propellerhead Reason 10.1 or later for Rack Extension format
installation
Mac OSX 10.11 or later
Note for MacOS X users: you will be asked for your password upon installation.
For Mac installer(.pkg) format, double-click the installer and follow the
instructions. The installer automatically point to your Mac’s default
VST/VST3/AU/AAX plug-ins and Standalone path (see below). Alternatively you
can customize the installation target to specific folder.
Here are the default folders installation path for each of our supported
platforms in Mac OSX:
Mac Audio Unit (EfektorDL3606.component): /Library/Audio/Plug- Ins/Components/
- Mac Audio Unit (EfektorDL3606.component): /Library/Audio/Plug-Ins/Components/
- Mac VST (EfektorDL3606.vst) : /Library/Audio/Plug-Ins/VST/Kuassa/
- Mac VST3 (EfektorDL3606.vst3) : /Library/Audio/Plug-Ins/VST3/
- Mac AAX (EfektorDL3606.aaxplugin): /Library/Application Support/Avid/Audio/Plug-Ins/
Windows VISTA or later
For Windows Installer (.exe), double-click the installer and follow the
instructions. The installer automatically points to your system’s default
plugins path (see below). Alternatively you can point the installation target
to specific folder. Most VST host already have a “Plugins” or “VSTplugins”
folder inside its installation directory, or you can point the host to read
any folder you choose.
Here are the default folders installation path for each of our supported
platforms:
- Windows 64-bit VST (EfektorDL3606.dll) : C:\Program Files\Steinberg\VstPlugins\Kuassa\
- Windows 64-bit VST3 (EfektorDL3606.vst3) : C:\Program Files\Common Files\VST3\
- Windows 64-bit AAX (EfektorDL3606.aaxplugin) : C:\Program Files\Common Files\Avid\Audio\Plug-Ins\
Mac OSX 10.11 or later
On a Mac, simply delete the plug-in located on the corresponding Plug-ins
folder, and delete other folders and file resources located at, Folders:
- /Library/Application Support/Kuassa/Default Presets/EfektorDL3606/
- /Users/[User Name]/Music/Kuassa/Presets/EfektorDL3606/ Files:
- /Library/Application Support/Kuassa/Misc/EfektorDL3606 EULA.txt
- /Library/Application Support/Kuassa/User Manuals/EfektorDL3606 Manual.pdf
- /Users/[User Name]/Music/Kuassa/Settings/EfektorDL3606.setting
Windows VISTA or Later
Use “Add/Remove programs” or “Programs and Features” from the Windows Control
Panel. If Efektor DL3606 does not listed, delete the .dll/.vst3/.aaxplugin
file from your VST plug-in folder. After Uninstallation, manually delete other
Efektor DL3606 file resources at, Folder:
- C:\Users\[User Name]\Documents\Kuassa\Presets\EfektorDL3606\ Files:
- C:\Users\[User Name]\Documents\Kuassa\Settings\EfektorDL3606.setting
Authorization
-
On evaluation mode, you will see this pop-up window when you first start the plugin.
-
To start the authorization process, click the [File] button on the top-left of the plug-in’s interface, there, you will find a selection box titled [import License].
-
Locate the License File
[ EfektorDL3606.kuassa] obtained from the confirmation e-mail sent to you after you purchase EFEKTOR Plug-in(s) from our web store or downloaded from the member area. Note that the License File contains your personal information used to authorize the plug-in. -
After you locate the License File, a pop-up box confirming that you successfully authorize your plug-in will show.
-
To check if you have completed the authorization process, just simply load the About Box by clicking the Efektor logo on the bottom left corner. If your authorization is successful, either your name or your e-mail address will be shown on the About Box. You will also notice that the generated noise/silence on the Evaluation Version is now gone.
Function
- [FILE] BUTTON: The Menu button contains several functions; preset saving, and shortcuts to the user manual and Kuassa website.
- PRESET SELECTOR: Select from available Presets, press left-right buttons or select from drop down menu.
- A-B COMPARE: Compares two different settings of the effect.
- COPY A to B: Copies settings from the “A” state to the “B” state or vise versa.
- DELAY SETTING: SYNC: When set to On, delay time follows the host’s tempo.
- DELAY SETTING: PONG : When set to On, enables the ping-pong mode. The repeats alternate between left and right channel.
- MODULATION SETTING: STEREO: When set to On, LFO modulates left channel in the opposite direction to right channel
- MODULATION SETTING: SYNC: When set to On, oscillation follows the host’s tempo.
- DELAY: Sets the delay time in ms. When Sync is enabled, it follows the host’s tempo in BPM.
- FEEDBACK: Sets the amount of signal that is sent back to the effect unit.
- WET: Controls the level of delayed signal.
- DRY: Control the level of original signal.
- TYPE SELECTOR: Select from five types of delay types within the device, each comes with different characteristic, and tone.
- RATE: Controls the speed of modulation. When Sync is enabled, it follows the host’s tempo in BPM.
- DEPTH: Controls the height or amplitude of the modulation.
- ELEKTOR LOGO: Click to show the About Box.
- LIGHT INDICATOR: Light blinking follows the delay time.
- BYPASS Turns the effect unit completely On or Bypass.
Preset Management
*Presets for EFEKTOR Plug-in(s) are located in the following folders:**
- Mac: Users/[YourName]/Music/Kuassa/Presets/EfektorDL3606
- Win: ~\ Documents\Kuassa\Presets\EfektorDL3606
- All presets inside these folders will be recognized by the plugin as individual presets, you can also create a folder to group the preset(s). They will thus be shown on the EFEKTOR Plug-in’s preset selector.
- To save a preset, set your plugin to the desired parameter settings, then select:
- “Save Preset”: Overwrites currently active preset.
- “Save Preset As”: Saves current settings into a new preset file (*.kdlp for DL3606).
- When you create a new preset using “Save Preset As…”, make sure that you have chosen the correct preset folder as aforementioned on point 1 above to make sure that it will be recognized automatically by EFEKTOR plug-ins.
- To add new additional preset banks, create a new folder by clicking “New Folder” button and rename it. Sub-folders are also recognized to manage presets into groups, useful to manage additional preset bank, or grouping presets based by their use.
- To add new additional preset banks, create a new folder by clicking “New Folder” button and rename it.
Sub-folders are also recognized to manage presets into groups, useful to manage additional preset bank, or grouping presets based by their use.
Function
-
BYPASS
Turns on, off or bypass the rack extension. -
TYPE SELECTOR
There are multiple fx models emulated within the device, each comes from different era, with different flavor, and character. Pick one which suited your desired sound. -
DELAY & MODULATION SETTING
DELAY SETTING: SYNC: When set to On, delay time follows the host’s tempo.
DELAY SETTING: PONG: When set to On, enables the ping-pong mode. The repeats alternate between left and right channel.
MODULATION SETTING: STEREO: When set to On, LFO modulates left channel in the opposite direction to right channel.
MODULATION SETTING: SYNC: When set to On, oscillation follows the host’s tempo. -
DELAY
Sets the delay time in ms. When Sync is enabled, it follows the host’s tempo in BPM. -
FEEDBACK
Sets the amount of signal that is sent back to the effect unit. -
WET LEVEL
Controls the level of delayed signal. -
DRY LEVEL
Control the level of original signal. -
RATE
Controls the speed of modulation. When Sync is enabled, it follows the host’s tempo in BPM. -
DEPTH
Controls the height or amplitude of the modulation. -
LIGHT INDICATOR
Light blinking follows the delay time. -
ADDITIONAL BYPASS Switch
Turns the effect unit completely On or Bypass. -
CV INPUTS
CV Input Socket: Receives incoming CV message for controlling each of EFEKTOR’s CV control-enabled parameters from another device’s CV output.
CV Input Trim: Turn counter-clockwise for each corresponding input to trim or reduce the intensity of incoming CV message. -
Audio input and output sockets: Please note that EFEKTOR is an FX, and should always be added as FX device instead of instrument.
MIDI CC PARAMETER LIST (Propellerhead reason)
- 128 = onBypass 129 = delayType
- 130 = pingpongOn
- 131 = delaySyncOn 132 = delay
- 133 = delaySync 134 = feedback
- 135 = stereoModOn
- 136 = rateSyncOn
- 137 = rate
- 138 = rateSync
- 139 = depth
- 140 = wetLevel
- 141 = dryLevel
- Kuassa Efektor Series Created by:
- Muhammad Abduh
- Abshar Platisza
- Muhammad Yusreza Irsyan
- Intan Zariska Daniyanti
- Iman Firman Amarullah
- Juan Prahamma Hartjamt
- Dimitar Nalbantov
- Arie Ardiansyah
- Raden Pratama Kusuma
- Adhitya Sulistia Wibisana
- Bramantyo Ibrahim
- Cil Satriawan
- Grahadea Kusuf
- Iqbal Ansyori
- Rathomi Trinugraha
- Bayu Ardianto
- Sundawan Sukmaya
- Presets and Audio Demos by:
- Dimitar Nalbantov (http://www.nalbantov.com)
- KUASSA TEKNIKA, PT
- Jl. Dipati Ukur No. 71A
- Bandung 40132
- West Java, INDONESIA
- https://www.kuassa.com
- General inquiry:info@kuassa.com
- Technical support :
- support@kuassa.com
- A Product of KUASSA. Bandung, West Java. Indonesia © 2010-2022 PT Kuassa Teknika Kuassa and Efektor DL3606 are trademarks of PT Kuassa Teknika, Indonesia. All other commercial symbols, product and company names are trademarks or registered trademarks of their respective holders. All rights reserved.
Documents / Resources
|
KUASSA Efektor DL3606
Delay
[pdf] Owner's Manual
Efektor DL3606, Delay, Efektor DL3606 Delay
---|---
References
- The domain name nalbantov.com is for sale | Dan.com
- Best Guitar Amp Simulator, Audio VST Plugins and Rack Extension
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>