HTD DMA-1240ADS Echo Dot Mount and Adapter Kit Instruction Manual
- September 13, 2024
- HTD
Table of Contents
HTD DMA-1240ADS Echo Dot Mount and Adapter Kit
Important Instructions
Our innovative solution provides all you need to install your Amazon Echo Dot Gen 3 or Gen 4 into the ceiling or wall of any room and extend Alexa’s audio output into your own speakers. A single Cat5e (or higher) cable, provides power for the Echo Dot while simultaneously carrying its audio signal back to your equipment over a distance up to 240 feet.
What’s Included
Ceiling/Wall mount bracket that securely holds Amazon Echo Dot Gen 3 or 4.
Two grille cover options: one that reveals a modest trim similar to canned lighting; one “trimless” design that covers the entire mount.
UL listed 24V power supply.
Adapter with stereo audio balun, RCA stereo inputs, and 12V power output for Echo Dot Gen 3 and 4.
All necessary cables.
How to Install
Best Uses
You can create a simple, yet powerful multi-zone audio system with in-wall and in-ceiling speakers centered around Amazon’s Alexa.
Connect to a Whole House Audio System.
The Echo Dot becomes a source that you can control by voice (and within the
Alexa app) and easily make available to other zones in the home.
Connect to Any Amplifier with ADS™ (Auto Detect and Switch).
When connected to the primary or Voice Assistant input, the audio from the
Echo device is heard whenever you need it, even if you were already listening
to a different source.
More info
|
DMA-1240ADS
12-Channel Amplifie
|
PLA-240ADS
Stereo Amplifier
|
Documents / Resources
| HTD
DMA-1240ADS Echo Dot Mount and Adapter
Kit
[pdf] Instruction Manual
DMA-1240ADS, PLA-240ADS, DMA-1240ADS Echo Dot Mount and Adapter Kit, DMA-
1240ADS, Echo Dot Mount and Adapter Kit, Mount and Adapter Kit, and Adapter
Kit, Adapter Kit, Kit
---|---