ECOLIGHT Dim 0-10 Biglia 12 Incasso Instructions

ECOLIGHT Dim 0-10 Biglia 12 Incasso

Specifications

• Brand: Vesoi-Italia
• Model: Biglia 12 Incasso Dim 0-10
• Year: 2024
• Light Source: LED
• Power Supply: 230V
• Wattage: 3W
• Current: 700mA
• Luminous Flux: 270lm
• Color Temperature: 3000K

FAQ

• What should I do if the luminaire is faulty?
  In case of a faulty item, refer to the European Guarantee provided by Vesoi for instructions on how to address the issue.

VESOI EUROPEAN GUARANTEE

• we produce innovative illumination devices and original designs, and we are always pledged to improve the quality and reliability of our products.
• for product installation, utilization, and maintenance we invite you to read and follow carefully instructions below.
• the consumer is granted some rights law 99/44/ce as assimilated in the different national regulations, and this warranty does not derogate from those according to law.
• Vesoi guarantees that the product is lacking any fault of manufacture.
• This guarantee is valid exclusively in Europe.
• In case of any lack of manufacture, you may ask for the guarantee enforcement on the product or on one of its components within two years from the purchasing date.
• the lack of conformity of the product is denounced within two months of its discovery;
• the lack is recognized as such by vesoi, a retailer, or an authorized assistance center.

WHAT TO DO IN CASE OF FAULTY ITEM

• contact the vesoi retailer either the closer authorised assistance center (these information are available at the site www.vesoi.com);
• supply to above said operators a descriptive note of the lack;
• not forget to enclose the proof of purchase, or the invoice orthe fiscal ticket; in lack we will not be able to allow reparation either to substitute the product in guarantee;
• shipped or delivered the defective product to the Retailer or to assistance Center, possibly in the original packaging or however using a suitable pack.
• Vesoi is reserving the right to not to operate the intervention in guarantee in absence of the proof of purchase and in case insufficient information are supplied or they are compatible with the product. Vesoi does not guarantee the integrity and / or the functioning of possible appliance bulbs included.

General Instructions

1. connect the luminaire only to properly grounded outlets. verify that the voltage reported on the appliance is the same power supply voltag.
2. accessories use not recommended for the luminaire can cause fires, electric shock and personal injury;
3. do not place the cable with sharp edges, fix it or let it hang. hold the cable away from heat and water sources;
4. to avoid possible damage, never place the appliance near or on hot surfaces such as heaters, hobs, gas stoves or similar

Assembly Instructions with built-in driver

1. drill at the desired counterceiling: be sure that inside you have minimum 5 cm to fit in heigh not visible part of recessed – fig. 1;
2. connect the cables from the ceiling to the box C – fig.1;
3. connect structure A to the power supply (clamps + – ) – fig. 2, insert the driver box B in counterceiling – fig.2;
4. fix A structure with a slight pressure on M side springs – fig. 3;

that there is at least 5 cm in height inside the false ceiling

biglia 12/pl dim 0-10
3w 700mA 270lm 3000K – 230V

References

• illuminazione italiana di design dal 1981 | Vesoi

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>