ECOLIGHT U-Brass 55/SP Dim Plus Metal Wall Lamp Instruction Manual

ECOLIGHT U-Brass 55/SP Dim Plus Metal Wall Lamp

Product Specifications

• Model: U-brass 55/sp dim plus
• Power: 12W
• Voltage: 24V (LED), 230V
• Luminous Flux: 1500lm
• Color Temperature: 3000K

Product Usage Instructions

General Instructions:

1. Connect the base only to properly grounded outlets. Verify that the voltage matches the power supply.
2. Avoid placing the cable near sharp edges, fix it securely, and keep it away from heat and water sources.

Assembly Instructions:

1. Detach the L profile from the B structure.
2. Unscrew the driver-box from the B structure using the provided screws.
3. Securely attach the B structure to the wall/ceiling as indicated.
4. Connect cables from the wall/ceiling to the terminal box as shown.
5. Fasten the driver-box to the B structure with screws.
6. Connect the jack of the B structure to the jack of the L profile.
7. Reposition the L profile on the B structure and secure it with M springs.
   Note: To replace the driver, detach the L profile from the B structure using a screwdriver and unscrew the driver-box.

Frequently Asked Questions

What should I do if the item is faulty?
In case of a faulty item, refer to the European Guarantee provided by Vesoi for instructions on handling defective products.

General Instructions

1. connect the base only to properly grounded outlets. verify that the voltage reported on the appliance is the same power supply voltage;
2. accessories use not recommended for the appliance can cause fires, electric shock and personal injury;
3. do not place the cable with sharp edges, fix it or let it hang. hold the cable away from heat and water sources;
4. to avoid possible damage, never place the appliance near or on hot surfaces such as heaters, hobs, gas stoves or similar
5. do not use the appliance if the cable or plug is damaged or if the appliance has fallen, is damaged or has malfunctioned. if damaged, the appliance, the cable, and the plug can cause discharges electrical, burns and fires

WHAT TO DO IN CASE OF FAULTY ITEM

• contact the vesoi retailer either the closer authorised assistance center (these information are available at the site www.vesoi.com);
• supply to above said operators a descriptive note of the lack;
• not forget to enclose the proof of purchase, or the invoice or the fiscal ticket; in lack we will not be able to allow reparation either to substitute the product in guarantee;
• shipped or delivered the defective product to the Retailer or to assistance Center, possibly in the original packaging or however using a suitable pack. Vesoi is reserving the right to not to operate the intervention in guarantee in absence of the proof of purchase and in case insufficient information are supplied or they are compatible with the product. Vesoi does not guarantee the integrity and / or the functioning of possible appliance bulbs included.

Assembly instructions with built-in driver

1. remove L profile from B structure – fig.1;
2. unscrew S driver-box from B structure with G screws – fig.2;
3. fix to wall/ceiling B structure with fasteners not included as indicated – fig.3;
4. connect cables from wall/ceiling to terminal box C as indicated – fig.4;
5. screw S driver-box to B structure with G screws – fig.2;
6. connect jack of B structure to jack of L profile;
7. reposition L profile on B structure and stop it with M springs – fig.1;
   note: to replace driver, unhook the profile L from B structure with a screwdriver, levering on M spring – fig. 5, and unscrew S driver-box;

U brass 55/sp dim plus
12w 24V 1500lm 3000K – 230V
fornito can driver e modulo led-strip luminaire contains driver and led-strip

References

• illuminazione italiana di design dal 1981 | Vesoi

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>