HOME 24WL1002C Twinkling Grand Fir Pre Lit Tree Instruction Manual

HOME 24WL1002C Twinkling Grand Fir Pre Lit Tree

FAQs

Q: Can this tree be used outdoors?

A: This product is designed for indoor use only. Do not use it outdoors unless specified for both indoor and outdoor use.

Q: Can ornaments be hung on the tree?

A: Do not hang ornaments or objects from the cord, wire, or light string to avoid damage or hazards.

THANK YOU

We appreciate the trust and conf appreciate the trust and confidence you hadence you have placed in Homeve in Home Decorators Collection through the purcDecorators Collection through the purchase of thishase of this 9 ft Reagan9 ft Reagan TTwinklingwinkling Grand Fir Pre-litGrand Fir Pre-lit TTreeree with Timerwith Timer. We strive to continually create quality products designed to enhance your home to enhance your home.Visit us online to revisit us online to see our full line of products our full line of products available for your home improvement need sailable for your home improvement needs. Thank you for thank you for choosing Homehoosing Home Decorators CollectionDecorators Collection!

Safety Information

IMPORTANT SAFETY INSTRUCTIONS

When using electrical products when using electrical products, basic precautions should always be followed as be followed including the following: including the following:

READ AND FOLLOW ALL SAFETY INSTRUCTIONS.

• This product is for indoor use onlyThis product is for indoor use only. The electrical rating 0.64The electrical rating 0.64 AA 120 V 60 Hz.120 V 60 Hz.
• Do not use seasonal products outdoors unless marked use seasonal products outdoors unless marked suitable for indoor and outdoor use suitable for indoor and outdoor use. When products arWhen products are used ie used in outdoor applications, connect the product to a Ground Fault Circonnect the product to a Ground Fault Circuitcuit InterruptingInterrupting GFCI .outlet If one is not the pro outlet is not provided, contact a qualified electrician for proper installation.
• This seasonal use product is not intended for perThis seasonal use product is not intended for permanent installation or permanent installation or use.
• Do not mount or place near gas or electric heaters, fireplaces, candles, or other similar sources of heat.
• Do not secure the wiring of the product with staples or nails, or place it on sharp hooks or nails. Do not secure the wiring of the product with staples or nails, or place it on sharp hooks or nails.
• Do not let the lamps rest on the supply cord or on any wires on the supply cord or on any wire.
• Unplug the product when leaving the house, when retiring for the night, or if left unattended. Unplug the product when leaving the house, when retiring for the night, or if left unattended.
• This is an electric product a toy! This is an electric product a toy! To avoid the risk of fire, burns, personal injury and electric avoid the risk of fire, burns, personal injury, and electric shock it should not be played with or placed where small children can reach it.
• Do not use this product for other than its intended use.
• Do not hang ornaments or other objects from cord, wire, or light string. Do not hang ornaments or other objects from cord, wire, or light string.
• Do not close doors or windows on the product or extension, as this may damage the wire insulation.
• Do not cover the product with cloth, paper, or any material not part of the product when in use.
• Do not move the tree by pulling the tree tops or tree branches.

SAVE THESE INSTRUCTIONS.

CAUTION : Grasp the plug to insert or remove from the power source. Do not unplug by pulling on the cord.

CAUTION : The product consists of non-replaceable LED lamps. Toreduce the risk of fire or electric shock, and do not attempt to replace lamps or modify wiring or product.

CAUTION : ALWAYS UNPLUG YOUR TREE FROM ITS POWER SOURCE BEFORE ASSEMBLING OR DISASSEMBLING.

CAUTION: This product can only be used with the original adapter, not other brands of adapter.

CAUTION: To reduce the risk of fire and electric shock: a) Do not install trees having needles, leaves, or branch coverings of metal or materials that look like metal, and b) Do not mount or support strings in a manner that can cut or damage wire insulation.

Pre Assembly

PLANNING ASSEMBLY

Carefully remove all the parts from the box, and place them on a flat surface. Read the entire manual prior to assembly, and identify all the parts included in the package against the parts list. If any parts are missing or damaged, do not attempt assembly, but contact our customer service center.

PACKAGE CONTENTS

Assembly

Assembling the tree stand

• • Choose a location near a wall outlet.
• • Open the stand to a 90-degree angle until the hole lines up with the hole on the tube.
• • Screw an eye bolt into the hole.

Assembling the tree

• Please remove protective covers from the base of the pole for each tree section before assembling.
• Carefully insert the bottom section (D) of a tree into the tree stand and tighten the screw.

Assembling the tree

• a Insert the lower middle section (C) of the tree into the bottom section (D).

Assembling the tree

• Insert the upper middle section (B) into the lower middle section (C).

Assembling the tree

• Insert the top section (A) into the upper middle section (B).

Assembling the tree

• Allow branches to fall into place or gently pull branches up and out. When adjusting branches be sure that all wires are free of branch hinges.

Assembling the tree

• Shape the branches. Starting with tips closest to the pole, shape one tip to the right, one to the left, and one at the center of the main stem. Repeat the pattern for each branch.

Finishing Assembly

• Plug the well-connected power cord from the tree section (D) into a proper outlet.
• Please note this tree is locked in the Demo function. The tree cycles automatically through 2-5 functions below.

The 5 lighting options available are:

1. Demo
2. Twinkling
3. Warm White Steady
4. Warm White Flashing
5. Warm White Slow Fade

These functions can be changed by pressing the foot pedal switch or using the remote control after unlocking the Demo function. Please see the Instructions of the remote control below to see how to unlock and lock the Demo function. In the condition of Demo function being locked, the foot pedal switch only has a switch function and timer function. The remote control can be used only by the ON/OFF key and the timing key.

• Press the foot pedal switch until one indicator light is on, and the tree lights will automatically run through a 6-hour ON, 18-hour OFF cycle.
• Continually press the foot pedal switch until two indicator lights are on, the tree lights will automatically run through an 8-hour ON and indicator lights 16-hour OFF cycle.

To turn off the timer function, press the foot pedal switch or OFF button on the remote control to turn off the timer. There is memory mode on timer control even unplug and re-plug the adaptor back on. Please unlock the Demo function first by using the remote control, then the foot pedal switch, and the remote control can work normally. Please see the Instructions for the remote control below to see how to unlock and lock the Demo function.

Operation

Turning on the tree

• Plug the well-connected power cord from the tree section (D) into a proper outlet.
• Unlock the Demo function. Please see the Instructions for remote control below to see you unlock and lock the Demo function. Press the remote control or foot pedal switch to choose functions and timer control.

Instructions of Remote Control

• Please note this tree has a remote control. Please pull out the insulation tape from the remote control, before starting to use it.

How to Unlock the Demo function :

• Press & hold the 0 button on the remote control until the lights flash once, then the pedal switch and the remote control are unlocked in the Demo function.

How to Lock the Demo function:

• Press & hold the 0 button on the remote control until the lights flash 3 times, and then the foot pedal switch and the remote control are locked in the Demo function.

Demo function unlocked:

• 1 Press the En button, and select the function below in proper order. Press the number key, and select from the following corresponding liahtina functions:
  1. Demo
  2. Twinkling
  3. Warm White Steady
  4. Warm White Flashing
  5. Warm White Slow Fade
• There is a memory mode for function adjustment.

Timer function

• Press the 6H button, and one indicator light on the foot pedal switch is on. RF The tree lights will automatically run through a 6-hour ON, 18-hour OFF cycle.
• Press the 8H button, and two indicator lights on the foot pedal switch are on. The tree lights will automatically run through an 8-hour ON, 16-hour OFF cycle To turn off the timer function, press the foot pedal switch or OFF button on the remote control to turn off the timer.

If the remote control does not work, check whether the battery of the remote control is out of power.

To replace the remote control battery:

• Open the battery case according to the mark on the back of the remote control.
• Replace with a new button cell “CR2025” (3 volts) into the compartment.
• WARNING

This is not a toy and is not intended for use by children.

• a) DO NOT DISPOSE OF BATTERIES IN FIRE. BATTERIES MAY EXPLODE OR LEAK.
• b ) Remove and immediately recycle or dispose of used batteries according to local regulations and keep them away from children. Do NOT dispose of batteries in household trash or incinerate them.
• c ) Even used batteries may cause severe injury or death.
• d ) Call a local poison control center for treatment information.
• e ) Use a button cell CR2025.
• f ) The battery voltage is 3 volts.
• g ) Non-rechargeable batteries are not to be recharged.
• h ) Do not force discharge, recharge, disassemble, heat above 60°C / 140°F or incinerate. Doing so may result in injury due to venting, leakage, or explosion resulting in chemical burns.
• i ) Ensure the batteries are installed correctly according to polarity (+ and -).
• j ) Do not mix old and new batteries, different brands, or types of batteries, such as alkaline, carbon-zinc, or rechargeable batteries.
• k ) Remove and immediately recycle or dispose of batteries from equipment not used for an extended period of time according to local regulations.
• 1. Always completely secure the battery compartment. If the battery compartment does not close securely, stop using the product, remove the batteries, and keep them away from children.

WARNING

• a ) INGESTION HAZARD: This product contains a button cell or coin battery.
• b ) DEATH or serious injury can occur if ingested.
• c ) A swallowed button cell or coin battery can cause Internal Chemical Burns in as little as 2 hours.
• d ) KEEP new and used batteries OUT OF REACH OF CHILDREN.
• e ) Seek immediate medical attention if a battery is suspected to be swallowed or inserted inside any part of the body.

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

1. this device may not cause interference, and
2. this device must accept any interference, including interference that may cause undesired operation of the device.

Use and Care Instructions

• When the product is placed on a live tree, the tree should be well-maintained and fresh. Do not place on live trees in which the needles are brown or break off easily. Keep the tree holder filled with water.
• If the product is placed on a tree, the tree should be well-secured and stable.
• Before using or reusing, inspect the product carefully. Discard any products that have cut, damaged, or frayed wire insulation or cords, cracks in the lamp holders or enclosures, loose connections, or exposed copper wire.
• When storing the product, carefully remove the product from wherever it is placed, including trees, branches, or bushes, to avoid any undue strain or stress on the product conductors, connections, and wires.
• When not in use, store neatly in a cool, dry location protected from sunlight.

Care and Cleaning

• Remove all ornaments and decorations.
• Unplug the cord from the wall outlet.
• Gently lift the tree top straight up to remove from the center section and fold all branches towards the pole.
• Repeat this step for the center and bottom tree sections.
• Carefully place all tree sections into a shipping box and tape it shut.
• Store your tree in a cool, dry place away from sunlight.

Troubleshooting

The tree does not light

| Ensure that all tree sections are connected to each other well by pressing each section down and rotating. Make sure the power cord plug is securely inserted into a working electrical outlet.
---|---
If you are still experiencing problems with the tree please call 1-800-986-3460 for instructions.

WARRANTY

3-year Limited Warranty

• This product carries a three (3) year warranty against defects In workmanship and materials. This product is not guaranteed against wear or breakage due to misuse and/or abuse.
• Date Code: 05012024_2008499
• Adapter Model No. TS-36W12V
• CAN ICES-005(B) / NMB-005(B)
• CAN RSS-Gen/CNR-Gen
• Model No. CLT-033

CONTACT INFORMATION

• Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service 8 a.m.- 7 p.m., EST, Monday-Friday, 9 a.m. – 6 p.m., EST, Saturday
• 1-800-986-3460
• HOMEDEPOT.CA
• Retain this manual for future use.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>