XDCOLECTION XO-8652 FSC Bamboo LED Weather Station Instruction Manual

XDCOLECTION XO-8652 FSC Bamboo LED Weather Station

DEVICE LAYOUT

1. LED display
2. Operating buttons
3. Type-C USB input

WHAT’S INCLUDED

• 1 x LED clock
• 1 x USB to Type-C USB power cable
• 1 x Instruction Manual

POWERING THE CLOCK

• Plug the small connector of the included USB cable into the Type-C USB port on the back of the clock. Plug the large end into a USB power port or 5V USB adapter (not included) and plug into a wall outlet.
• The LED display self-checks from “0000” to “9999”, and then enter the normal clock mode display.

USING THE CLOCK

1. Press [Alarm ON/OFF] button to turn on/ off the alarm, the “ ” in the lower left corner will display when the alarm is turned on.
2. When in time mode, press the [DOWM] button to toggle between the 12-hour clock and the 24-hour clock. The clock will show “PM” in the upper left corner when in PM time.
3. In time mode, short press [ UP] button to switch display mode, dP-1, aP-2.

SETTING

SETTING THE TIME
To set the clock time, first make sure you are in time mode.

1. Press the [ SET ]button until the time is displayed.
2. Press + hold the [ SET ]button to set the time.The time hours will begin flashing.Press the [ UP ] and [ DOWN ] buttons to adjust.
3. Press [ SET Ito save the hour setting.The minute digits will begin flashing. Press the [UP ] and [ DOWN ] buttons to adjust,and press [ SET ] to save. The clock will return to its default display mode.

SETTING THE ALARM TIME
In time mode, make sure the Alarm is in off status.

1. Short press [ SET ] button enter alarm mode, display “—” means alarm in off status.
2. Press [ UP ] turn on the alarm function, 12-Hours default, the “ ” in the lower left corner will display when the alarm is turned on.
3. When the alarm is turned on press+hold the [ SET] button to set the alarm time.The alarm hours will begin flashing Press the [ UP] and [ DOWN ] button to adjust.
4. Press [ SET ] to save the alarm hour setting . The alarm minute digits will begin flashing Press the [UP ] and [ DOWN ] buttons to adjust ,and press [ SET ] button to save. The clock will return to its default display mode.
5. When alarm clock rings, the “ ” in the lower left corner will flash.
6. Long press the [Alarm ON/OFF] button to turn off the Alarm

SETTING THE DATE

1. In time mode, short press the [ SET ] button until the date is displayed.
2. Press + hold the [ SET ]button to set the date.The year will begin flashing .Press the [UP ] and [ DOWN ] buttons to adjust.
3. Press [ SET ] to save the year setting .The month will begin flashing. Press the [ UP ] and [ DOWN ] buttons to adjust ,and press [ SET ] to save the month.
4. The day will begin flashing. Press the [UP] and [ DOWN ] buttons to adjust, and press [ SET ] to save .The clock will return to default display mode.

SNOOZING THE ALARM

• When the alarm is ringing, press the [Snooze] button to snooze the alarm.
• The alarm will ring every 5 minutes. When the ring is on or in Snooze status, press and hold [Snooze] button 2 seconds to turn off the alarm.

TEMPERATURE

• Once clock is turned ON the temperature is automatically detected and displayed.
• Default temperature unit: Celsius.
• 0°C-50°C (32°F-122°F).
• Long Press [ DOWN] Button to switch between Celsius/Fahrenheit.

Explanation WEEE logo

The crossed-out wheeled bin symbol indicates that the item should be disposed of separately from household waste. The item should be handed in for recycling in accordance with local environmental regulations for waste disposal. By separating a marked item from household waste, you will help reduce the volume of waste sent to incinerators or land-fill and minimize any potential negative impact on human health and the environment.

EU Declaration of Conformity

XD Connects B.V. hereby declares that this product is in compliance with the essential requirements and other relevant provisions of Derective 2014/30/EU.
The complete Declaration of Conformity can be found at www.dconnects.com > search on item number.

XD Connects B.V.
Lange Kleiweg 6-28
2288 GK Rijswijk, The Netherlands
1F, iCentrum, Holt Street,
Birmingham, B7 4BP, England

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>