MAGICSHINE SEEMEE 200 V2.0 Bike Tail Light User Manual
- September 11, 2024
- MAGICSHINE
Table of Contents
MAGICSHINE SEEMEE 200 V2.0 Bike Tail Light
Specifications
- Product: SEEMEE 200 V2.0
- Mounting Options: Saddle mount, Seat post mount
- Accessories: Micro USB Cable
Product Usage Instructions
Installation
Scheme 1:
- Step 1 installation instructions.
- Step 2 installation instructions.
- Step 3 installation instructions.
Scheme 2:
- Step 1 installation instructions.
- Step 2 installation instructions.
Output/Runtime
| Mode | Output | Runtime (Day) | Runtime (Night) |
|---|---|---|---|
| Low | Main Light: 10LM | 27h | 4h50min |
Operation Instructions
-
When the brake sensor is on, the taillight will enter sleep
mode after 5 minutes of inaction and auto-activate any vibrations. -
When the brake sensor detects braking, the taillight will light up with maximum output.
Charging/Power Indicator
When the light is off, click the switch to activate the battery indicator for 3 seconds. Charging status: Flash red. Fully charged: Constant green for 3 minutes. Standard charging time is approximately 1.5 hrs (5V 1A).
Power Indicator
- 0%-10%: Flash red
- 11%-20%: Constant red
- 21%-100%: Constant green
FAQ
Q: How do I activate the battery indicator?
A: When the light is off, click the switch to activate the battery indicator for 3 seconds.
Q: What is the standard charging time?
A: The standard charging time is approximately 1.5 hours with a 5V 1A input.
Q: How does the taillight behave with the brake sensor on?
A: The taillight will enter sleep mode after 5 minutes of inaction and will auto-activate on any vibrations when the brake sensor is on.
ACCESSORY/STRUCTURE
HOW TO INSTALL
CHARGING/POWER INDICATOR
- When the light is off, click the switch to activate the battery indicator for 3 seconds.
- Charging: Flash red
- Fully charge: Constant green for 3 minutes
- Standard charging time approx 1.5 hrs (5V 1A)
POWER INDICATOR
- 0%-10% : Flash red
- 11%-20% : Constant red
- 21%-100% : Constant green
OPERATION INSTRUCTIONS
- When the brake sensor is on, the taillight will enter sleep mode after 5 minutes of inaction and auto-activated on any vibrations.
- When the brake sensor detects braking, the taillight will light up with maximum output.
Turn the brake function on:
- When the light is off , press and hold the switch for 3s until the light lights up constantly at highest output.
Turn the brake function off:
- When the light is off , press and hold the switch for 3s until the light keeps flashing quickly at highest output.
ON/OFF:
- Press and hold the switch to turn the light on/off , the default output is the last mode when turned off.
CHANGE MODE:
- When the light is on , single click the switch to cycle through Low-High-Flash-Group Ride-Smart-Low…
MEMORY FUCTION:
- Mode memory features will save the last selected brightness level automatically.
LOW POWER MODE:
- When the remaining battery power is low , the switch starts flashing and the lighting mode changes to ECO mode. The brake function is disabled during this period.
360°TRACING LIGHT:
- The 360 tracing light is controlled by the light sensor. It will be off during the daytime.
- At nighttime , it flashes in constant mode and lights up constantly in flash mode and smart mode.
OUTPUT/RUNTIME
WARNING
- All performance measurements under ANSI/NEMA FL1-2009 Standard. The tests are performed indoors under a room temperature of 25 degrees Celsius with 25KM/H wind conditions.
- The runtime may vary depending on the external temperature and ventilation conditions, and these biases may affect the results of testing.
- The stated runtime of each mode excludes the brake function. When the brake function is on,the runtime will vary depending on the frequency of braking.
- Tel: (+86) 755-295 536 69
- Fax: (+86)755-275 897 77
- E-mail:support@magicshine.com (order from Magicshine.com
- online store)
- service@magicshine.com (order from other sales channels)
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>