MAGICSHINE SEEMEE DV Camera Taillight User Manual
- June 13, 2024
- MAGICSHINE
Table of Contents
MAGICSHINE SEEMEE DV Camera Taillight User Manual
WARNING
IN THE BOX
SEEMEE DV
Seat post mount
16GB microSD card
Type-C charging cable
OPERATION INSTRUCTIONS
ON/OFF: Press and hold the power button to turn the light on/off, the
default output is the last mode when turned off.
ENABLE/DISABLE THE DV: When the light is on, the DV function is turned on
by default. Press and hold the camera button to turn on/off the DV function.
VIDEO RECORDING: When the DV function is on, click the camera button to
start/pause the video recording.
PHOTO TAKING: When the DV function is on, double click the camera button
to take pictures.
DV INDICATOR:
- When the DV is in video recording mode, the indicator light will circle clockwise with red light.
- When the DV is in pause recording or standby mode, the indicator light will keep flashing red.
- When the DV is in an abnormal state, the indicator light will keep flashing white.
AUTOMATIC INCIDENT CAPTURE: With a built-in accelerometer, the taillight continuously records and automatically saves videos (before 5s, during, and after 55s of the event) if it detects an incident, and you can access or download the footage through the APP (Album>Camera Browser>Event).
*The sensor’s sensitivity can be adjusted via the APP (Setting>GST “G-sensor Shake Trigger”) to prevent unexpected triggering.
CHANGE MODE: When the light is on, click the power button to cycle
through LOW-HIGH-FLASH-ECO FLASH mode.
MEMORY FUNCTION: When the light is turned on again, it will turn to the
last selected lighting mode automatically.
LOW POWER MODE: When the remaining battery power is lower than 10%, the
lighting mode changes to ECO FLASH mode. The DV function is disabled during
this period.
OUTPUT / RUNTIME
|
BRIGHTNESS
|
DV ON
|
DV OFF
---|---|---|---
LOW| 10LM| 10h| 35h
HIGH| 30LM| 8.5h| 12h
FLASH| 30-0LM| 9h| 70h
ECO FLASH| 10-0LM| 10h| 110h
*All data are measured in accordance with
ANSI/NEMA FL 1-2009. The test was conducted at a temperature of 25°C and
a wind speed of 25 km/h.
The runtime may vary depending on external temperature and ventilation
conditions, and these deviations may affect the result of testing.
CHARGING / BATTERY INDICATOR
When the light is off, click the power button to display the remaining battery
level for 3 seconds.
Charging: Flash red
Fully charged: Constant green Standard charging time approx.
4.5 hrs (5V 1A)
BATTERY INDICATOR
21%-100%：Constant green
11%-20%：Constant red
1%-10%：Flash red
HOW TO INSTALL
APP PAIRING
Scan and download the App, connect your phone to the WIFI prefixed with CARDV, enter the initial password 1234567890 and check DV videos and photos via your phone after the connection is completed.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>