VisionTek VS315 Smart Projector User Manual

VisionTek VS315 Smart Projector

Product Information

Specifications

• Compliance: FCC Part 15
• Operating Conditions: Uncontrolled environment
• Radiation Exposure Limits: FCC approved
• Minimum Distance: 20cm between radiator and body

FAQ

Frequently Asked Questions

• Q: What should I do if I experience interference while using the device?
  • A: If you experience interference, try adjusting the placement of the device or moving it away from other electronic devices that may be causing the interference.
• Q: Can I modify the device for better performance?
  • A: No, any modifications or changes not approved may void your authority to operate the equipment and could also affect its compliance with FCC regulations.

This User Manual is important to you.
Please read it before using your projector.

PACKING LIST

PRODUCT INFORMATION

CAUTION

• RISK OF ELECTRIC SHOCK
• DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

WARNING:

• DO NOT LOOK DIRECTLY THE LENS WHEN THE PROJECTOR IS IN THE POWER ON MODE.

NOTICE

Recommended

NOT Recommended

FUNCTION OVERVIEW

REMOTE CONTROL

• POWER
  • Toggles the projector between standby mode
• IMAGE FLIP
  • When not in the android system, press this key to rotate the image. (this feature is invalid in Android interface)
  • Selects the desired menu items and makes adjustments.
• OK
  • Press this key to confirm the current  setting or to enter the submenu.
• HOMEPAGE
  • Press this key to get to the homepage directly VOL Adjusts the sound level.
• MUTE
  • Mute volume or recover.
• SOURCE
  • Displays the source selection bar.
• MENU
  • Turn on the OSD menu, goes back to previous
• SETTINGS
  • Press this key to go to Android setting interface
• EXIT
  • Exits and saves menu settings.

Note: Please change the batteries if the remote doesn’t work after being used for a while .

QUICK START

1. Plug the power cord into an outlet.

2. Take off the lens cover.

3. Connect your device to the projector correctly.

4. Press power button to turn on the projector.

5. Select the correct input source to project your device.

6. Adjust the kickstand accordingly.

7. Adjust the keystone and focus ring to get the best image performance.

8. Press the power button twice to turn off the projector.

PROJECTOR CONNECTION

INPUT SOURCE

• Press S on the projector or S on the remote to enter the interface of Input Source.
• Select signal input by using Direction key. Press OK to confirm. Insert USB disk or corresponding signal input cable.

SPECIFICATION

SETTINGS

• Press key on remote or move cursor to settings and press OK to enter.
• Projection settings: Change the projection mode according projector installstion way. Zoom in/out the images in the range of 50% to 100%.
• Correct the images in horizontal/vertical direction or from four corners.
• Network settings: Projector searches connectable network automatically when Wifi is turned on. Select desired Wifi. Input correct password to connect. The same Wifi will be connected spontaneously when power on the projector next time if keep Wifi switch on as projector shutdown.
• Bluetooth settings: Projector searches connectable Bluetooth automatically when BT switch turned on. Select desired device to connect by pressing OK button. pressing OK. The same BT device will be connected spontaneously when power on the projector next time if keep BT switch on as projector shutdown.
• Language and input method: Select desired OS language.
• Date and time: Change display Date, Time Zone and Time. It also can be obtained from network automatically.
• Other settings: Change the default input signal channel and initial App when the projector turned on. Change key tone, Screen Saver start time and shutdown time.

PROJECTION DISTANCE & SIZE

• The recommended projection screen is around 80 inches with a projection distance of around 7. 79ft.
• Ambient darkness will improve the clarity of the projected images.

TROUBLESHOOTING GUIDE

1. Blurry Image
   • Adjust focus ring/keystone.
   • Project and screen/wall must be in effective distance.
2. Remote Unresponsive
   • Make sure remote points at IR receiver directly.
   • Do not cover IR receiver.
   • Try a new pair of AAA batteries.
3. Mobile Connection
   • iOS: Genuine lightning to HDMI cable.
   • Android: Micro USBto HDMI adapter/Type C to HDMI cable.
4. Up Side Down Images
   • Enter “Image flip” on remote to flip the projector image.

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF warning

• This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
• This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>