ZAGG pro keys 2 Bluetooth Keyboard User Guide
- September 11, 2024
- ZAGG
Table of Contents
ZAGG pro keys 2 Bluetooth Keyboard
Welcome
For a full instruction manual, please visit zagg.com/user-
guides.
The Pro Keys 2 is comprised of two pieces: a detachable keyboard and a case
with a foldable folio cover.
Inserting Your Device
Inserting Your Device into the Case:
- Holding your device in landscape mode with the volume control buttons facing up, press the top half of your device into the case and apply light pressure all around to snap it snuggly into place.
Removing Your Device
Removing Your Device from the Case
- Hold on to the top lip of the case and press against the back of the case. Then, grasp the exposed side of your device and lift/pull it away from the cover.
Attaching/Detaching the Keyboard from the Case
- The top of the keyboard and the bottom of the case are magnetized and will snap securely together. They can be detached with a light pull.
- The folio-style flap (attached to the case) is also magnetized. It has a light magnetic attachment to the back of the keyboard. It allows the keyboard to slide along the flap to form a stand but prevents the keyboard from slipping.
Forming the Stand
- To use the stand function, the keyboard and case should be connected. Raise the case (with your device inside) to a standing 90 angle from the keyboard.
- Lift the bottom of the keyboard off of the folio-style flap and pull the keyboard forward (toward you). The stand will unfold at the back.
Powering On/Off
- Press the Power button to turn your Pro Keys 2 keyboard on. A green LED will light briefly. Press and hold the power button for three seconds to turn your Pro Keys 2 keyboard off. A red LED will flash indicating it has turned off.
Pairing the Keyboard with Your Device
- Verify your device’s Bluetooth® settings are on. Press and hold Pro Key 2’s Bluetooth I button for three seconds. A blue LED under the power button will flash until pairing is complete.
- Select “ZAGG Pro Keys 2” from your device’s list of available devices to complete pairing.
- To pair a second device, press and hold the Bluetooth 2 button for three seconds, and follow the same procedure.
Charging Your Keyboard
-
Plug the Type-C end of the charging cable into the Type-C port on the keyboard (night side).
Plug the other end of your charging cable into your preferred USB charging outlet. A red LED light on the battery key will illuminate to show that your keyboard is charging. -
When this light turns off, your Pro Keys 2 keyboard is finished charging. Disconnect the charging cable.
Disconnecting Your Keyboard
- First, detach the keyboard from the case.
- There are three ways to switch to your onscreen keyboard:
- Press the Keyboard Hide/Show button.
- Turn off the Bluetooth connection from your device.
- Turn the Pro Keys 2 keyboard off.
Checking Your Battery Level:
- To check your Pro Keys 2’s battery life, press fn + the battery key. The LED light will flash one of the following three ways:
- 3 green flashes = 50% or more battery life
- 2 yellow flashes = 25-49% battery life
- I read flash = less than 25% battery life
Trouble Shooting
If your device doesn’t respond to Pro Keys 2, there may be a simple
explanation.
Try the following steps.
- Restart your device.
- Turn your Pro Keys 2 off and back on.
- Download the ZAGG Keyboard Firmware Utilities App from the App Store for the latest firmware updates. For more details, visit: https://bit.ly/3R8q6yO
- Forget and re-pair your Pro Keys 2.
- If your Pro Keys 2 does not establish or maintain a Bluetooth connection, reset the Bluetooth module by charging your keyboard.
- If, after charging, your keyboard doesn’t operate correctly, please contact ZAGG Customer Service.
- If you still experience problems, please contact ZAGG Customer Service at zagg.com/support/contact.php questions@zagg.com
- 1-800-700-ZAGG [9244] 00-1-80 1-839-3906 for international customers
FCC
WARNING
Keyboard use may be associated with physical injuries. If you experience any
discomfort or pain, stop using your keyboard and consult a physician.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference,
- this device must accept any interference received, including interference that may cause undesired operation.
©2024 ZAGG Inc. All Rights Reserved, ZAGG®, and Pro Keys” are trademarks of
ZAGG Inc. iPad® is a trademark of Apple Inc., registered in the U.S. and other
countries.
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by ZAGG Inc. is under license.
Other trademarks and trade names are those of their respective owners.
FCC Caution:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference
- this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, under part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used under the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>