ALPHAFsn TB-AF01-B Air Cooler Instruction Manual

ALPHAFsn TB-AF01-B Air Cooler

Product Information

Specifications:

• Model Name: TB-AF01/B
• Version: 2024. V1
• Type: Air Cooler
• Alt. Name: BREEZ ACM/6L-AC

Product Usage Instructions

Safety Precautions:

• Only use parts and accessories supplied with the appliance.
• Avoid touching the appliance and plug with wet hands.
• Avoid exposing the appliance to water or high temperatures.
• Keep the appliance away from fire sources.

Parts & Accessories:
The air cooler comes with various parts and accessories including a handle, control panel, cool air outlet, louvres, water tank, remote control, and more.

Control Panel Functions:
The control panel includes buttons for power on/off, fan speed adjustment, swing louvers control, dry wind mode, natural wind mode, sleep wind mode, timer settings, ionizer function, silent mode, cooling function, and UV light function for mosquito trapping.

UV Light Function:

1. Ensure the insect waste tray is correctly installed before activating the UV light function.
2. Press the UV Light button to activate the air trapping function.
3. Regularly inspect and clean the insect waste tray to remove debris.

Filling Water into Water Tank:
Fill the water tank with clean water to ensure proper functioning of the air cooler.

Cleaning & Maintenance:
Before cleaning or performing maintenance, always unplug the appliance from the power socket. Clean the honeycomb cooling pad and air filter regularly by washing them under clean water or dusting off dirt with a soft brush or cloth.

FAQ

• Q: Can I use parts/accessories not designated for use with this appliance?
  A: No, using parts/accessories not specified for use with this appliance could result in personal injury or property damage.

• Q: How do I activate the UV light function for mosquito trapping?
  A: Ensure the insect waste tray is correctly installed, then press the UV Light button to activate the air trapping function.

SAFETY PRECAUTION

IMPORTANT: PLEASE READ BEFORE USING THE APPLIANCE. SAFETY PRECAUTIONS SHOULD BE FOLLOWED TO REDUCE THE RISK OF FIRE ELECTRICAL SHOCK AND PERSONAL INJURY.

1. Unplug the Power Cord during installation, cleaning, refilling of water or relocation of appliance.
2. Do not modify the length of the Power Cord.
3. Do not use the appliance if the Power Cord or Plug is damaged, or the power socket is loose.
4. Repairing/servicing of the appliance must be carried out by authorized and qualified electricians only.
5. If the Power Cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified person to avoid a hazard.
6. Do not touch the appliance and Plug when your hands are wet.
7. Do not expose the appliance to dripping or splashing water or objects filled with water, such as vase.
8. Do not use the appliance near the gas stove, any fire source, unusually humid or high temperature, oil soot with a lots of metal powder, objects that may be drawn to fan, such as drapes or curtain and outdoor.
9. Do not insert hands or fingers into the appliance, or movable parts.
10. Place the appliance on a stable and level surface.
11. Do not hang or mount appliance on wall or ceiling.
12. Do not operate or use when appliance housing is damaged.
13. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
14. Do not operate the appliance when the Rear Frame is removed from appliance or if there is a loose-fitting Rear Frame. Doing so can cause serious injury or dangerous electrical shock.

WARNING

This appliance is designed to use only those parts supplied with this appliance and/or accessories designated specifically for use with this appliance. Using parts and/or accessories not designated for use with this appliance could result in personal injury or property damage.

PARTS & ACCESSORIES

CONTROL PANEL

ON or OFF Air Cooler

**| Fan Speed –**

3 selections: Low, Medium & High

| | SWING –

Louvers automatically swings in horizontal direction.

**| SWING –**

Louvers automatically swings in vertical direction.

| **| DRY WIND** –

The cooler will work at high speed for 20 minutes and return to standby mode automatically. During “Dry” mode, only the “Mode” button and “Power” button can be activate.

| NATURAL WIND –

The cooler will work at the pattern of wind cycle:

High speed for 6 seconds, medium speed for 6 seconds, low speed for 6 seconds, then stop for 3 seconds and repeat.

| SLEEP WIND –

The cooler will work at the pattern of wind cycle:

Low speed for 10 seconds, Mild speed for 10 seconds and repeat.

Timer| TIMER OFF –

To turn OFF the Air Cooler at the preset time. 1,2,4,8 hours.

ION| IONIZER –

Press the button to activat/de-activate the ionizer function.

Auto

| ****

| ECO –

The cooler’s speed adapts to the ambient temperature:

high above 35°C,medium between 29-34°C, low from 25-28°C, and mild below 25°C.

**| SILENT –**

The cooler will work at Mild speed continuously.

Cooler| **| COOLING –**

The unit will begin pumping and showering the Honeycomb Cooling Pad.

Uv
Light| UV LIGHT –

To activate the Mosquito Trap function.

UV LIGHT FUNCTION

Before activating the UV Light, ensure that the insect waste tray is properly installed. (See FIG 1)

NOTE :

If the insect waste tray is not correctly installed, the UV Light function won’t activate, and you’ll hear 3 beep sounds.

1. Once the insect waste tray is correctly installed, press the UV Light button. The air trapping function will activate after 1 minute, initiating the UV Light process.
2. Regularly inspect the insect waste tray to remove insect debris.

IMPORTANT: ALWAYS TURN OFF THE UNIT BEFORE CHECKING THE TRAY.

FILLING WATER INTO WATER TANK

1. Make sure the water level is above the Min. water level and below the max level. (See FIG 3)
2. Press the Cooler button; the cooling indicator light will illuminate, and the unit will begin pumping and showering the cooling pad.
3. Enjoy the refreshing and comfortably cool breeze.

NOTE :

1. Fill the water tank before using the Cooling function. If it’s low or empty, the function won’t activate until refilled. You can use the unit as a regular fan without water; just keep the “Cooling” button off in humid conditions.
2. Adding ice cubes or an ice cooler box to the water tank enhances cooling.

REMOTE CONTROL INSTALLATION

1. When using the remote control, remove the battery protector first.
2. The key method operates the same as the control panel version.
3. Place the battery provided at the battery holder and insert to the remote control.

(Installation diagram for Remote Control. Picture for reference only, please prevail in kind.)
For the first time, please pull out the battery protective film.

CLEANING & MAINTENANCE

WARNING: DO NOT OPERATE THE APPLIANCE WHEN THE REAR FRAME IS REMOVED FROM THE APPLIANCE OR IF THERE IS A LOOSE-FITTING REAR FRAME. DOING SO CAN CAUSE SERIOUS INJURY OR DANGEROUS ELECTRICAL SHOCK.

IMPORTANT : BEFORE PERFORMING ANY CLEANING & MAINTENANCE WORK, UNPLUG APPLIANCE FROM THE SUPPLY SOCKET.

CLEANING THE HONEYCOMB COOLING PAD AND AIR FILTER

1. Pull the handle of Rear Frame and remove from unit.
2. Wash the Honeycomb Cooling Pad and Air Filter under clean water as needed or dust off dirt with a soft brush or cloth.

NOTE :

1. For optimal performance and an extended product lifespan, it is recommended to clean the Honeycomb Cooling Pad and Air Filter every
2. weeks. In areas where the surrounding air is dusty, cleaning should be carried out weekly.

GENERAL CLEANING.
Avoid using gasoline, thinners, solvents, ammonia, or other chemicals for cleaning and maintenance.

CLEAN THE WATER TANK
To clean the water tank, pull it out, ensuring you lift it slightly to release the clamp locator beneath it. Use a damp cloth with a mild detergent for cleaning. Afterward, rinse it with clean water, let it dry, and then reinstall the tank.

CLEAN THE INSECT WASTE TRAY
Pull out the insect waste tray, remove any waste inside, and wash the tray with a mild detergent. Make sure it’s completely dry before reinstalling it in the cooler.

CLEAN THE EXTERNAL PART
For cleaning external parts, use a mild detergent and a soft cloth.

NOTE:

1. Safety switch turns off unit when back cover is removed.
2. Regularly clean the filter for optimal performance.
3. Never immerse unit, cord, or plug in water.
4. For repairs, visit our service center; do not attempt DIY.

TECHNICAL SPECIFICATIONS

CUSTOMER SERVICE CENTRE

If you need any technical assistance or faulty report, please contact our customer service  centre at :
Malaysia

• Alpha Home Appliances Sdn. Bhd. (390258-H)
• Head Office : 6, Jalan Sungai Kayu 32/37, Berjaya Park, Sect 32,40460 Shah Alam, Selangor.
• Tel : 03-5740 6666 Fax : 03-5740 8220
• Website : www.alphamalaysia.com Email : info@alphamalaysia.com
• Johor : 71, Jalan Molek 3/10, Taman Molek, 81100 Johor Bahru.
• Tel : 07-353 4833 / 4933 Fax : 07-355 4233
• Melaka : 19, 19-1 & 19-2, Jalan KSB 11, Taman Kota Syahbandar, 75200 Melaka.
• Tel : 06-292 2398 / 2399 Fax : 06-292 2392
• Perak : 11, Jalan Tasek Timur 5, Taman Tasek Indra, 31400 Ipoh, Perak.
• Tel : 05-545 2282 / 547 2282 Fax : 05-547 6282
• Penang : 28 Jalan Icon City, Icon City, 14000 Bukit Mertajam, Pulau Pinang.
• Tel : 04-506 2366 / 2066 / 2566 Fax : 04-506 2966
• Pahang : A131, Jalan Dato Wong Ah Jang, Taman Liza, 25100 Kuantan, Pahang.
• Tel : 09-516 5226 Fax : 09-513 9226 Singapore
• Alpha Sales & Services Pte. Ltd. (200709461 R) 50, Ubi Avenue 3, #02-16/17, Frontier, Singapore 408866.
• Tel : +65 6841 0111 Fax : +65 6747 0030
• Website : www.alphasingapore.com Email : customercare@alphasingapore.com

References

• Home | Alpha Home Appliances Sdn Bhd
• Home | Alpha Sales & Services Private Limited

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>