TWELVENYC INC DRUNKELEPHANT A9 Bluetooth Speaker Instruction Manual

TWELVENYC INC DRUNKELEPHANT A9 Bluetooth Speaker

Structure Description

1. Switch Button
2. “+” Button
3. “_” Button
4. Play/Pause
5. TF/Micro SD Card port
6. Input (5V1A)

Button Function Description

1. On/Off Button: Long press 3 seconds to power on/off. When power on, long press 1.5 seconds to turn on/off backlight. Short press to switch mode.
2. “+” Button: Short press “+” button, there will be prompt tone when the volume is maximum, long press for the next song.
3. “-“ Button: Short press “-“ button, there will be prompt tone when the volume is minimum, long press for the last song.
4. Play/Pause: When play music, short press to pause, short press again to play, When the phone rings, short press to answer, short press again to hang up, long press to reject the call.

Structure Description

1. After the Bluetooth Speaker is on, green light flashes, speaker is ready to pair. Turn on the Bluetooth of your phone or device, search for new device, find “A9” to pair, there will be prompt tone when pair successfully, green light on, When pair successfully, it will auto connect when the Bluetooth is on.
2. If you need to connect another device, you have to disconnect on the connected phone or device, when green light flashes, speaker is ready to pair again.
3. When insert a TF/Micro SD card, it will play the music in the TF card first. It will play loop when no operation.
4. Red light on when charging, red light off when charging complete

Cautions

1. When using your speaker indoors, the tonal quality can vary depending on where the speaker is placed in a room.
2. When using your speaker outdoors, you should expect the tonal quality to change as you move farther away from the speaker.
3. To clean the exterior surface of your product, you can wipe it using a soft, dry cloth.
4. Do not use solvents, chemicals, or sprays.
5. Do not allow liquids to spill or objects to drop into any openings.
6. Do not place the speaker on wet or dirty surface.

Packing Accessories

• Micro USB cable*1
• Bluetooth Speaker*1
• Manual*1

Product Specification

• Product Model: A9
• Product Name: Bluetooth Speaker
• Frequency Response: 80Hz-20KHz
• Executive Standard: GB8898-2011
• Continuous Play time: 6-7h ( 75% volume )
• Speaker Power: 3oΩ5W
• Input: 5V-1.0A
• Output Power: 4W
• Weight: 225g
• Capacity Battery: 2000mAh
• Charging time: 3-4h
• Bluetooth Rang: ≥ 10m
• Dimension: 103mm(L)x103mm(W)x38mm(H)

Warning : Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>