GuoTong GT888 Series LED Strip Lights User Guide

GuoTong GT888 Series LED Strip Lights

Specifications

• SKU: GT88809-RGB-US
• Wattage: 126W/20M
• Voltage: 110V
• Frequency: RGB
• Color: RGB
• Dimmable: Yes
• IP-Rating: Ta

Product Usage Instructions

Precautions

1. Check the product carefully before installing.
2. Ensure the power is off before wiring and installing.
3. Avoid retrofitting the product randomly.
4. Install the product in a location where people cannot easily reach.
5. Use the included power plugs for normal operation.
6. Avoid folding the product when in use to prevent burning out due to heat accumulation.

How to Install
Method One

1. STEP 1: Unpack the product, connect the power plug (adapter), and check the product’s functionality by plugging in the power.
2. STEP 2: Screw cap 1 at the end without power connection to make it waterproof.
3. STEP 3: If the product works normally, cut off the power supply. Fix the fastening buckle in the mounting position and secure the product on it.
4. STEP 4: Connect the power, hide the power plug, and ensure waterproofing.

Method Two

1. STEP 1: If extending the product length, connect the female end to another male end and waterproof by tightening the plastic nut.
2. STEP 2: Follow Method One for further installation steps.

Routine Maintenance

1. Clean LED lights regularly and ensure proper lighting.
2. Check for waterproofing regularly.
3. Turn off the power before performing maintenance work.
4. Avoid using chemical solvents in daily maintenance to prevent damage to LED lights.

Remote Control Function Explanation
Detailed instructions on remote control functions are provided in the manual for adjusting colors, brightness, speed, and modes of the LED strip lights.

FAQ
Q: Can I cut the LED strip lights to adjust the length?
A: No, the LED strip lights cannot be cut as per the specifications provided.

LED Strip Lights User Guide
THANK YOU for buying this product.To ensure the best lighting experience,please install it according to below instructions and keep this guide for future reference.

Precautions

1. Please check the product carefully before installing.
2. Ensure the power is off before wiring and installing.
3. Please do not retrofit the product at random.
4. The product should be installed in where people cannot reach easily.
   To guarantee the product work normally,please use the included power plugs. To prevent the product from burning out due to heat accumulation,please do not fold the product when light up.

Parameter

Components and Structure

Dimensions

1. STEP1
   Unpack the product and connect a power plug (adapter), then plug in the power to check that the product’s functionality is working.

2. STEP2
   At the end where the power is not connected, screw the cap to make it waterproof.

3. STEP3 If the product is working normally, please cut off the power supply. Fix the fastening buckle in the mounting position, and then fix the product on it.

4. STEP4 Connect the power and hide the power plug in the box (not included) or shelter in case of rain. And note (the plug connecting the lamp strip is waterproof)

Method two

1. TEP1 If you need to increase the product length, please connect its female end to another male end, then tighten the plastic nut to waterproofing.
2. STEP2 Follow the Method one.

Routine maintenance

1. Ensure lighting, clean led light regularly and check for waterproofing.
2. Make sure the power is switched off before carrying out maintenance work.
3. Please do not use chemical solvent in daily maintenance to avoid damage of led light.

Remote control function explanation

FCC Caution

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>