Rebel KOM1080 PC Headset Owner’s Manual

June 4, 2024
Rebel

COMP PC HEADSETRebel KOM1080 PC Headset

OWNER’S MANUAL
model: KOM1080

SAFETY INSTRUCTIONS

Read this instruction manual and keep it for future reference. The producer does not take responsibility for damages caused by inappropriate handling and use of the product.

  • Read the instruction manual before first use and keep it for future reference.
  • Minimize the volume on your audio device before connecting the headphones in order to avoid hearing damage from sudden exposure to excessive volume. Keep the volume at a reasonable level throughout the entire time of using the headphones. To prevent damage to your hearing, do not raise the volume too high.
  • Do not use the headphones in places where the inability to hear ambient sound presents a serious risk (such as at railroad crossings, train stations, construction sites or on roads where vehicles and bicycles are traveling).
  • Never use the headphones while driving a car, riding a motorcycle or bicycle, or operating any other vehicle, as it may cause a potential risk to your safety.
  • Stop using the headphones if you feel tinnitus, hearing discomfort, irritation or have other adverse reactions.
  • Do not attempt to repair this device yourself. In case of damage, contact an authorized service point for a check-up/repair.
  • Do not subject the headphones to strong impact.
  • Clean this device with a soft, slightly damp cloth. Do not use any abrasives or chemical agents to clean this product.
  • Protect this product from moisture, humidity, water, and any other liquid.
  • Avoid using/storing it in extreme temperatures. Do not expose it to direct sunlight and sources of heat.
  • Never use this device if it is damaged.
  • Use only authorized accessories.

PRODUCT DESCRIPTION

Rebel KOM1080 PC Headset - fig

  1. Microphone
  2.  3,5 mm microphone jack
  3.  3,5 mm headphones jack

CONNECTIONS
Note: No driver installation is needed, the operating system will automatically detect and configure the device.

  1. Connect the 3,5 mm jack (with headphones symbol on it) to the headphone output of your PC or laptop to transmit sound.
  2. Connect the 3,5 mm jack (with microphone symbol on it) to the microphone input of your PC or laptop to transmit microphone sound.

SPECIFICATION

Magnet: neodymium
Speaker size: 40 mm
Impedance: 30 Ohm ± 15%
S/N ratio: 60 dB
THD: 2%
Frequency response: 20 Hz – 20 kHz
Nominal input power: 20 mW
Maximum input power: 30 mW
Microphone: omnidirectional
Microphone sensitivity: -43 dB
Sensitivity: 105 dB ± 6 dB
Cable length: 1,8 m
Connections: 3,5 mm microphone jack, 3,5 mm audio jack
Weight: 170 g

LEARN MORE
For more information on this device visit: www.krugermatz.com.
Read the owner’s manual carefully before using it.
Visit www.krugermatz.com website for more products and accessories.
In case of any doubts or questions reach out to our Frequently Asked Questions section.

Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)

It is forbidden to place equipment waste marked with the symbol of a crossed- out trash bin together with other waste. This equipment is subject to collection and recycling. The harmful substances it contains can cause environmental pollution and pose a threat to human health.
Made in China for LECHPOL ELECTRONICS Sp. z o.o. Sp.k., ul. Garwolińska 1, 08-400 Miętne.

www.rebelelectro.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals