TITAN TISR241W Shadow Rail Installation Guide
- June 16, 2024
- Titan
Table of Contents
TITAN TISR241W Shadow Rail
Specifications
| Component | Description |
|---|---|
| SHADOW RAIL CONNECTOR™ Level Assembly | Includes FEMALE and MALE connectors |
with a Gripping Cone
Screws| #10×2″ and #10×1″ sizes for attachment
Optional| 2×4 Cap Rail
Balusters| SNAP’N LOCK™ Balusters
Instructions
Installation Steps
-
START:
Mark the length of TOP and BOTTOM 2×4 rails. Cut 2×4 RAILS 1-1/2″ shorter to accommodate RAIL Connector assemblies. Fasten FEMALE Connectors to ends of 2×4 rails with 2″ screws.
-
BOTTOM RAIL INSTALLATION:
Press MALE Connector against post to impress Cones and mark position. Fasten to post with screws.
Note : Use 1″ screw for lower hole if using Titan Post Anchor™. REPEAT FOR OTHER POST.
-
Slide BOTTOM RAIL into MALE Connectors.
-
Slide MALE connectors into FEMALE Connectors of TOP RAIL.
-
Fasten MALE Connector to post using 2″ screws. REPEAT FOR OTHER POST.
-
SLIDE TOP RAIL into MALE Connector.
-
USING SNAP’N LOCK™ BALUSTERS:
Make sure the Gap is 1/2″ larger than Aluminum Balusters. Install connectors to TOP and BOTTOM rails. SNAP balusters in place. -
FINISHED:
Optional 2×4 Cap Rail. Use other brands of balusters (Composite, Wood, Metal). Install lower rail to BOTTOM Rail with screws. TOP Rail to align with HOLES OF CONNECTORS with Baluster Kit.
Contact Information
If you have any questions or in the event of any loss or damage resulting from improper installation, please contact us at:
- Phone: 1-866-577-8868
- Website: www.titanbp.com
Disclaimer:
In no event shall TITAN BUILDING PRODUCTS be liable for any loss or damage,
direct or otherwise, which results from the improper installation of this
product. If for any reason TITAN BUILDING PRODUCTS becomes liable for loss or
damage, direct or otherwise, the aggregate liability of TITAN BUILDING
PRODUCTS shall be limited to the retail purchase price of the products.
Brand Information
TITAN BUILDING PRODUCTS – More Outdoor Beauty…Real easy.
FAQ’s
How much should I shorten the 2x4 rails?
Cut the 2x4 rails 1-1/2
What size screws are used for installation?
The installation requires #10x2
Is it necessary to use SNAP'N LOCK™ Balusters?
No, other brands of balusters such as Composite, Wood, Metal can also be used, but ensure proper alignment and installation as per the instructions.
What should be the gap between the rail and the balusters?
The gap should be 1/2