aiwa AI1019 Prodigy Crystal TWS Earphones User Guide
- September 7, 2024
- Aiwa
Table of Contents
- aiwa AI1019 Prodigy Crystal TWS Earphones
- Product Information
- Product Usage Instructions
- WHAT’S INCLUDED
- A CLOSER LOOK
- CHARGING
- POWERING ON/OFF
- BLUETOOTH PAIRING
- USING YOUR EARPHONES
- MAINTENANCE AND CARE
- SAFETY PRECAUTIONS
- FCC STATEMENT
- FEATURES
- SPECIFICATION
- WARRANTY
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
aiwa AI1019 Prodigy Crystal TWS Earphones
Product Information
This device is designed to comply with part 15 of the FCC Rules. It operates under the following conditions:
- This device must not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
The device can mitigate interference by implementing the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Note : The Grantee is not responsible for any changes or modifications
not expressly approved by the party responsible for compliance. Such
modifications could void the user’s authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirements. It
complies with the FCC’s RF radiation exposure limits set forth for an
uncontrolled environment. The device and its antenna(s) must not be co-located
or in conjunction with any other antenna or transmitter.
Product Usage Instructions
- Ensure proper placement of the receiving antenna for optimal signal reception.
- Maintain adequate separation between the device and other electronic equipment to avoid interference.
- Use a dedicated outlet for the device to prevent electrical interference.
- If experiencing issues, contact the dealer or a qualified technician for assistance.
Specifications
- Compliance: FCC Part 15
- RF Exposure: General RF exposure requirements met
- Operating Environment: Uncontrolled environment
FAQ
Q: What should I do if I encounter interference while using the device?
A: If you experience interference, try reorienting the antenna, increasing
separation from other devices, or using a different power outlet. If the issue
persists, seek assistance from a dealer or technician.
WHAT’S INCLUDED
A CLOSER LOOK
CHARGING
Charging the Case
- Insert one end of the included USB-C charging cable into the charging port on your case.
- Insert the other end of the USB cable into a suitable
- USB charging adapter.
- While charging, a digital display on the case shows the charging case’s current battery power. At 100, the charging case is fully charged.
Charging the Earphones
Place the earphones in the charging case to charge. Make sure the charging
contacts on the earphones make contact with the charging contacts in the case.
While charging, the indicator light on each earphone will turn red. When fully
charged the indicator lights will turn OFF.
Charging can take approximately 1-2 hours.
POWERING ON/OFF
When first using your earphones, place them into the case. To turn the
earphones ON, remove them from the case. To turn the earphones OFF, put them
back into the case.
Note : It is recommended that the earphones be fully charged before use
.
Press and hold the touch sensor on the earphones for approximately three
seconds to power ON. Press and hold the touch sensor for approximately four
seconds to power OFF.
BLUETOOTH PAIRING
- Once powered on, your earphones will go into pairing mode. The LED Indicator will alternately flash blue and red.
- Go to the Bluetooth settings menu on your phone. Make sure that Bluetooth is turned on. Connect to the device listed as “AIWA Prodigy Crystal”
- After successful pairing, the LED indicator lights on the earphones will turn OFF.
NOTE : After five minutes without pairing to a Bluetooth device, the earphones will automatically turn OFF.
USING YOUR EARPHONES
LEFT EARPHONE
- Previous Track: Double Press
- Decrease Volume: Press
- Voice Assistant: Press and Hold for approximately 2 seconds.
- Answer Call: Press
- Reject Call: Double Press
- End Call: Press and Hold for 2 seconds
RIGHT EARPHONE
- Play/Pause: Press and Hold for 2 seconds Next Track: Double Press
- Increase Volume: Press
- Answer Call: Press
- Reject Call: Double Press
- End Call: Press and Hold for 2 seconds
MONO MODE
While only one earphone is active and paired, it has the following limited functionality:
- Decrease Volume : Press
- Increase Volume : Double Press
- Voice Assistant : Press and hold for 2 seconds.
Warning
To prevent possible hearing damage, do not listen at high volume levels for
long periods. For your own safety, please be aware of your surroundings when
using these earphones.
RESET
To reset your earphones and return them to original default factory settings, make sure that Bluetooth on your phone is turned off, and then insert the earphones into the charging case. Remove one earphone from the charging case and press the touch button four times to turn off. Place back into the charging case and repeat for the second earphone.
MAINTENANCE AND CARE
- Use a soft cloth or paper towel to clean your earphones and charging case. Never use any harsh chemicals or detergents for cleaning. Make sure your earphones and charging case are dry before charging.
- When unused, your earphones and charging case should be stored in a cool, dry place.
- Never tug or yank on a cable connected to your charging case. Connect and disconnect cables as carefully as possible.
- Never expose your earphones and charging case to high temperatures or extreme cold.
SAFETY PRECAUTIONS
When using your earphones, basic safety precautions should always be followed, including:
- READ ALL INSTRUCTIONS BEFORE USING YOUR EARPHONES.
- Never expose your earphones to high temperatures, extreme cold, high humidity, moisture, or water.
- To avoid the risk of electric shock, never attempt to open or repair your earphones without the assistance of certified professionals.
- Your earphones are not to be used by children or the infirm without suitable adult supervision.
- Always press all buttons carefully. Do not manhandle your earphones.
- Do not use your earphones at temperatures under 32°F (0°() or over 104°F (40°().
- Do not drop your earphones, throw them, or subject them to strong impacts or physical trauma.
- Contact the manufacturer for support if you detect any abnormalities when using your earphones. In addition, do not continue to use your earphones if you detect any smoke or fire.
- Unplug your earphones when not in use for extended periods.
- When plugged in, do not place your earphones on flammable materials such as rugs, carpets, or bedding.
- Please recycle or dispose of your earphones properly according to your municipality’s laws and rules. Contact local recycling facilities and/or the manufacturer for further information.
- Clean your earphones and charging case using a soft cloth or paper towel. Do not use harsh chemicals when cleaning your earphones, and never submerge your earphones in water.
BATTERY WARNING:
- The device is equipped with an integrated lithium-ion battery. The battery cannot be replaced. Do not attempt to remove the battery from the device.
- Do not dispose of in fire or expose it to excessive heat.
- Do not crush, puncture, incinerate, or short-circuit external contacts.
- Please recycle or dispose of the battery properly. Contact your local recycling facilities and/or the manufacturer for further information.
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note : This equipment has been tested and found to comply with the limits
for a Class B digital device, under part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used by the instructions, may cause
harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Note : The Grantee is not responsible for any changes or modifications
not expressly approved by the party responsible for compliance. such
modifications could void the user’s The device has been evaluated to meet
general RF exposure requirements. authority to operate the equipment.
This equipment complies with FCC’s RF radiation exposure limits set forth for
an uncontrolled environment. This device and its antenna(s) must not be co-
located or in conjunction with any other antenna or transmitter.
FEATURES
-
20 Hour Playtime
Up to 5 hours initial charge plus 3 extra charges in case -
Pocket Sized
Take it anywhere -
Touch Control
-
Voice Assistant
SPECIFICATION
- CHARGE TIME : APPROXIMATELY 2 HOURS
- PLAY TIME: UP TO 20 HOURS*
Applicable at 50% of maximum volume. Results will be lower when volume is higher.
WARRANTY
This warranty covers the original consumer purchaser only and is not
transferable.
This warranty covers products that fail to function properly UNDER NORMAL
USAGE, due to defects in material or workmanship. Your product will be
repaired or replaced at no charge for parts or labor for a period of one year.
What Is Not Covered By Warranty
Damages or malfunctions not resulting from defects in material or workmanship
and damages or malfunctions from other than normal use, including, but not
imited to, repair by unauthorized parties, tampering, modification or
accident.
To Obtain Warranty Service and Troubleshooting Information:
Call 1-800-592-9541 or visit our
website at www.aiwa.co.
To receive Warranty service along with the name and address of an authorized
product service center, the original consumer purchaser must contact us for
problem determination and service procedures. Proof of purchase in the form of
a bill of sale or receipted invoice, evidencing that the product is within the
applicable Warranty period(s), MUST be presented in order to obtain the
requested service. It is your responsibility to properly package and send any
defective products along with a dated copy of proof of purchase, a written
explanation of the problem, and a valid return address of the authorized
service center at your expense. Do not include any other items or accessories
with the defective product. Any products received by the authorized service
center that are not covered by warranty will be returned unrepaired.
AIWA
Edison, NJ 08817
© 2024 Alwa Acquisitions LLC. All rights reserved. AIWA and associated marks
are owned by Alwa Acquisitions and used under IJcense.
Keep all relevant information for future reference.
The Bluetooth• word mark and logos are registered trademarks owned by the
Bluetooth SIG, Inc. and any use of such marks by Sakar lnternatlonal is under
license.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>