ADVANTECH IPC-623 4U 20-Slot Rackmount Chassis Owner’s Manual
- September 7, 2024
- Advantech
Table of Contents
IPC-623 4U 20-Slot Rackmount Chassis
“`html
Specifications
-
Drive Bay: External 3.5 – 1, 5.25 – 2
-
Cooling Fan: 3 (12 cm, 150 CFM each)
-
Air Filter: 4 (200 x 45 mm) + 2 (128 x 95 mm)
-
LED Indicators: Power, HDD, fan, temperature, power voltage
status -
Control: Power switch, system reset, alarm reset buttons
-
Dimensions: 482 x 177 x 657 mm (19 x 7 x 26)
-
Weight: 27.4 kg (60.41 lb)
Product Usage Instructions
Installation
-
Place the IPC-623 chassis in a suitable location with proper
ventilation. -
Open the top cover by removing the screws and slide it off to
access the internal components. -
Install the system backplane and secure it in place using the
provided screws. -
Connect the power supply unit to the designated slot and ensure
a secure connection. -
Install the desired drives into the drive bays following the
user manual instructions. -
Close the top cover and secure it with the screws.
Maintenance
Regular maintenance is essential for optimal performance. Follow
these steps:
-
Clean the air filters and fans periodically to prevent dust
buildup. -
Check LED indicators for any abnormal status and take necessary
actions. -
Inspect internal components for any loose connections or signs
of wear. -
Update system firmware as recommended by the manufacturer.
FAQ
Q: What type of power supply does the IPC-623 support?
A: The IPC-623 supports either a 500W or a 1200W single power
supply.
Q: How many drive bays are available in the chassis?
A: The chassis has two external 5.25 drive bays and one 3.5
shockproof drive bay.
“`
IPC-623
4U 20-Slot Rackmount Chassis
Features
4U rackmount chassis supports up 20 slot or 4-system backplane Support 500W or
1200W single power supply Two external 5.25″ and one 3.5″ shockproof drive
bays Three 12 cm / 150 CFM cooling fans Dual top cover designed for easy
maintenance Six easily replaceable air filters provide good airflow Built in
Intelligent System module enabling whole system fan control and
emote manageability
Specifications
Drive Bay Cooling Miscellaneous Intelligent System Module Remote Monitoring
Environment
Physical Characteristics
External
3.5″
1
5.25″
2
Fan
3 (12 cm 150 CFM each)
Air Filter
4 (200 x 45 mm) + 2 (128 x 95 mm)
LED Indicators
Power, HDD, fan, temperature, and power voltage status
Control
Power switch, system reset (reserve 3 more for quad-system) and alarm reset buttons
CPU/System fan speed, CPU/system temperature, motherboard voltage (Only selected Advantech MBs/CPU card with WISE-PaaS/RMM installed can fully enable these functions, check with Advantech local rep. for detail information)
Operating
Non-Operating
Temperature
0 ~ 40 °C (32 ~ 104 °F)
-20 ~ 60 °C (-4 ~ 140 °F)
Humidity
10 ~ 85% @ 40 °C, non-condensing
10 ~ 95% @ 40 °C, non-condensing
Vibration (5 ~ 500 Hz)
1 Grms
2 G
Shock
10G (with 11ms duration, 1/2 sine wave)
Dimensions (W x H x D)
482 x 177 x 657 mm (19″ x 7″ x 26″)
Weight
27.4 kg (60.41 lb)
Front View
Inside View
One 3.5″ and two 5.25″ device space
Alarm reset button Power button
Intelligent System Module Two 5.25″ and one 3.5″ disk drive bays
500W or 1200W single power supply
Rear View
Inside View
Three 150 CFM hot-swappable fans
Industrial Motherboards
All product specifications are subject to change without notice.
Last updated: 2-Aug-2024
Dimensions
IPC-623
Unit: mm [inch]
465 [18.31] 482 [18.98]
426 [16.78]
699 [27.52] 658 [25.91]
101.60 [4.00] 177 [6.97]
173 [6.81] 85.75 [3.38]
92 92 92 92 92 92 95 [3.62] [3.62] [3.62] [3.62] [3.62] [3.62] [3.74]
Ordering Information
Part Number IPC-623BP-50ZD IPC-623BP-1KZC
Power Supply 96PS-A500WPS2B 96PS-A1K2WPS2G
Power Supply Type Single Single
Note : Choose power cord with IEC C19 plug for IPC-623BP-1KZC
Packing List
Part Number
Description
IPC-623
4U , 20 slot chassis with handle set
1750007931-01
system fan
1700002459
Reset button with wire
2130004800S000
door filter ( front )
2130004799S000
door filter ( side )
1960002462
key set
Content of Accessory Box
98R26230000
Handle set
2001062300
User manual
Quantity 1 3 1 2 4 1
1 1
Optional Accessories
Part Number 1600002166 1700029268-01
1700024754-01
Description AT switch Power cable for GPU card (Two 4-pin 12V connectors to one 6+2 pins PCIe power connector) Power cable for GPU card (Two B4P Molex connectors to one 6+2 pins PCIe power connector)
- If GPU card with 2 power connectors, please use 1700029268-011 + 1700024754011;If GPU card with 1 power connector, please use 1700029268-01. * Only 500W or higher wattage PSU support 1700029268-01 and 1700024754-01 for high-end GPU card.
Wattage 500W 1200W
80 Plus Grade Bronze Gold
Switch Type ATX ATX
Backplane Options
Part Number PICMG 1.3 Backplane PCE-7B19-88B1E PCE-5B18-88B1E PICMG 1.0 Backplane PCA-6120P18-0A2E PCA-6120P12-0A3E
Description
2 PICeX8,8 PCIX,8 PCI 1 PICeX16,8 PCIX,8 PCI
1 ISA, 17 PCI, 1 PICMG/PCI 7 ISA, 11 PCI, 1 PICMG/PCI
Online Download www.advantech.com/products
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>