HONGSHENG TF16PRO Smart Watch User Guide
- September 8, 2024
- HONGSHENG
Table of Contents
TF16PRO Smart Watch
Product Specifications:
-
Compliance: Part 15 of FCC Rules
-
Radiation Exposure Limits: FCC approved for uncontrolled
environment -
Minimum Distance: 0cm between radiator and body
Product Usage Instructions:
Safety Precautions:
1. Do not make any changes or modifications to the device that
are not explicitly approved by the manufacturer as it may void your
authority to operate the equipment.
2. Ensure the device is installed and operated according to the
FCC guidelines to prevent harmful interference.
3. Maintain a minimum distance of 0cm between the radiator of
the device and your body during operation.
Installation:
1. Place the device on a stable surface with proper ventilation
to prevent overheating.
2. Connect the device to a power source using the provided
cables.
3. Follow any specific installation guidelines mentioned in the
user manual.
Operation:
1. Power on the device using the designated button or
switch.
2. Follow the user manual instructions for accessing and
utilizing the device’s features.
3. In case of any interference or undesired operation, ensure
that the device is operating within the specified parameters.
FAQ:
Q: Can I modify the device for better performance?
A: No, any changes or modifications not approved by the
manufacturer may void your warranty and authority to operate the
device.
Q: What should I do if I experience interference during
operation?
A: Check if the device is placed within the recommended distance
from your body and ensure it is not causing harmful interference to
other equipment.
FCC Warnning: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection againstharmful
interference in a residential installation. This equipment generates, uses and
can radiateradio frequency energy and, if not installed and used in accordance
with the instructions, maycause harmful interference to radio communications.
However, there is no guarantee thatinterference will not occur in a particular
installation. If this equipment does cause harmfulinterference to radio or
television reception, which can be determined by turning the equipmentoff and
on, the user is encouraged to try to correct the interference by one or more
of thefollowing measures: · Reorient or relocate the receiving antenna. ·
Increase the separation between the equipment and receiver. · Connect the
equipment into an outlet on a circuit different from that to which the
receiver is connected. · Consult the dealer or an experienced radio/TV
technician for help.
Caution: Any changes or modifications to this device not explicitly approved
by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1)This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 0cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>