nVent MAC2SF Caddy Mc/Ac Cable Clip With Shot Fire Bracket Owner’s Manual
- September 6, 2024
- nVent
Table of Contents
nVent MAC2SF Caddy Mc/Ac Cable Clip With Shot Fire Bracket
Product Information
The MC/AC Cable Clip with Shot-Fire Bracket is designed to securely hold MC/AC cables ranging from 14-2 to 10-3 sizes. It is constructed with steel and spring steel materials, finished with electrogalvanization for durability.
Specifications
- Catalog Number: MAC2SF
- Material: Steel; Spring Steel
- Finish: Electrogalvanized
- nVent CADDY Armour MC/AC Cable Size: 14-2 to 10-3
- Height (H): 2 3/8
- Width (W): 2 3/16
- A: 1.3
Product Usage Instructions
- Identify the appropriate size of MC/AC cable to be secured.
- Open the cable clip and insert the cable into the clip.
- Adjust the clip to fit the cable securely, ensuring a tight grip.
- Mount the clip using appropriate hardware or brackets to the desired surface.
- Double-check the secure attachment of the cable clip before use.
FAQ
-
Q: Can this cable clip be used for outdoor installations?
A: The MC/AC Cable Clip is designed for indoor use only and should not be exposed to outdoor elements. -
Q: What is the maximum cable size this clip can accommodate?
A: The clip is suitable for MC/AC cables ranging from 14-2 to 10-3 sizes. -
Q: Are installation instructions included with the product?
A: Yes, detailed installation instructions can be found on nVent’s website or obtained from customer service representatives.
FEATURES
- Provides easy snap-in installation of up to two MC/AC cables.
- Complete with shot-fire bracket and pre-assembled drive pin from DEWALT®.
- Quickly and easily attaches to concrete, steel or composite metal decking.
- Integrated pin installs easily using powder-actuated or single-shot gas-actuated tools.
- ICC-ES ESR-2024 evaluation report available for drive pin from DEWALT®.
PRODUCT ATTRIBUTES
- Material: Steel;Spring Steel
- Finish: Electrogalvanized;nVent CADDY Armour
- MC/AC Cable Size: 14-2 to 10-3
- Height (H): 2 3/8″
- Width (W): 2 3/16″
- A: 1.3″
ADDITIONAL PRODUCT DETAILS
Uses Powers Fasteners, Inc. part number 50032.
Pre-assembled drive pin from Powers Fasteners, Inc. works with Powers® C4CZ,
Simpson® GCN-MEPKT, SPIT® P1000, P200, P2201, P3500 / PA3500, P35s, P45, P60,
P7201, Sniper; Ramset® 721, Cobra, D45 / D60 / D60L, M70, SA270, T3SS, TS750P,
TS60P, Viper; Hilti® DX35, DX350 / DX351 / DX36M, DX100 / DX200, DX460, DXA40,
DXA41, DXE72 / DX400; Würth® Diva-1, BST-1, BST-2 or equivalent nailers.
DIAGRAMS
WARNING
nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent’s instructions and warnings may cause product malfunction, property damage, serious bodily injury and death and/or void your warranty.
North America
+1.800.753.9221
Option 1 – Customer Care
Option 2 – Technical Support
Europe
- Netherlands: +31 800-0200135
- France: +33 800 901 793
Europe
- Germany: 800 1890272
- Other Countries: +31 13 5835404
APAC
- Shanghai: + 86 21 2412 1618/19
- Sydney: +61 2 9751 8500
© 2024 nVent. All nVent marks and logos are owned or licensed by nVent
Services GmbH or its affiliates. All other trademarks are the property of
their respective owners.
nVent reserves the right to change specifications without notice.
References
- Building a more Sustainable and Electrified World | nVent
- Building a more Sustainable and Electrified World | nVent