Lowrance ‎HDS-LIVE Multi-Touch Screen User Manual

June 3, 2024
LOWRANCE

Lowrance  ‎HDS-LIVE Multi-Touch Screen

Lowrance HDS-Live Fish Finder

Specifications

  • BRAND: Lowrance
  • MODEL NAME: HDS-LIVE
  • SCREEN SIZE: 7 Inches
  • CONNECTIVITY TECHNOLOGY: Ethernet
  • ITEM WEIGHT: 74 Pounds
  • ITEM PACKAGE DIMENSIONS L X W X H: ‎12.5 x 10 x 9 inches
  • PACKAGE WEIGHT: 04 Kilograms
  • ITEM DIMENSIONS LXWXH: ‎12.6 x 9.06 x 9.84 inches
  • COLOR: ‎Active Imaging 3-in-1
  • MATERIAL: ‎Plastic
  • STYLE: ‎Active Imaging 3-in-1

Introduction

For the finest possible picture of fish and structure, both below and to the sides of your boat, combine CHIRP Sonar with StructureScan 3D or StructureScan HD. With its dual-core CPU, HDS is able to readily operate technology like StructureScan 3D, Mercury VesselView Link, and Lowrance Outboard Pilot with faster redraws and quicker response times. A high-visibility contrast never previously seen in scanning fish finders is produced by new dynamic color range. The near-photographic image of SideScan, DownScan Imaging, TotalScan, and StructureScan HD/3D quality is improved by a larger spectrum of color.

When watching two CHIRP channels at once, you’ll never miss your targets. Maintain visibility of your preferred high CHIRP frequency for improved target separation near the bottom or in small schools. Get around fixed hazards more quickly with automatic route planning that calculates the shortest, safest course based on a boat’s draft, beam, and height. requires Navionics+, Navionics Platinum, or C-MAP MAX-N+ charts.

HOW TO KNOW IF A TRANSDUCER IS LAWRANCE

Observe the transducer cable, which is about an inch away from the connector. A silver tag with the transducer model printed on it is fastened to the cable.

HOW TO CONNECT PHONE TO LAWRANCE

Start off by pressing the pages button on HDS live unit > settings > wireless

turn on Bluetooth > bluetooth options > select your phone and tap pair.

HOW TO CONNECT TO WIFI

Go to pages key > settings > wireless > connect to a wireless hotspot > select you wireless access > if network is encrypted, put the encryption key > select connect.

HOW TO ADD MAPS ON LAWRANCE GPS

  • Your Lowrance device should start up after you turn it on.
  • Insert the SD card into the device.
  • The menu option “Waypoints, Routes, Trails” Load From Card under Menu.
  • Select the GPX file and click Enter.

HOW TO SYNC LAWRANCE

Once you’ve logged in to the Lowrance mobile app, select Menu > My devices and follow the on-screen instructions to turn on all MFDs and associated devices. then perform a QR code scan on the MFD, which is shown. You’ll receive notification that your MFD and mobile device have been paired.

FAQs

The 3-in-1 transducer is it included in this unit?****

It does, indeed.

Can I just load my SD map card because c maps don’t work in this situation?****

To ascertain compatibility, we would need to know what type of SD card you are using. Emailing us directly is possible at lowrance.tech@navico.com.

Are there 77-160 lenses on it?****

There are no 77-160 lenses on the HDS-7 Live. This device’s display has a 1024×600 resolution. >1200 nits of brightness are present. The display is an IPS 7″ model. It has a multi-touch screen with an 80° top/bottom and 80° left/right viewing angle.

Is a flush mount kit for HDS9 Live available?****

A flush mount kit is not required for these units. Upon snapping off the unit’s bezel, you have 4 holes that let you flush mount it.

Does a hardtop boat need an external antenna?****

No, a boat with a hardtop functions just well with the internal antenna.

How are you going to make this work in Guam?****

Guam is outside of the locked grid lines, which is why you are receiving the GeoFence lock notification. However, as this is US territory, you can get an unlock code without paying anything.

Does it communicate with Yamaha’s, Sonic Hub, Nema-2000, and Point One?****

The HDS-16 Live will unquestionably connect to the Yamaha engine interface, Sonic Hub, NMEA 2000, and Point-1.

Can I use the transducers from my HDS Gen 3 with this unit?****

Yes, but a 7 pin to 9 pin adapter, component number LOW-000-13313-001, is required.

Will it match up with xi5 motor guide? Do the pin point and heads up?****

Yes they will work together with an adapter.

Do quick connect adapters exist so that the device can be removed when not in use without requiring all the cords to be disconnected?****

I take my equipment out of the boat after each use. Connecting the connections takes less than two minutes (5)!

Is there a GPS?****

Yes

Ordered just now. Cover is it included?****

The HDS-12 Live unit comes with the sun cover.

Does this work with the 3G radar from Lowrance?****

Yes, Lowrance Broadband 3G Radar will support this.

Has it has an SD slot?****

There are two micro SD slots.

Do they offer discounts for HDs12 and 9 Gen3 head units only? I already have one.****

Not as far as I’m aware. Other merchants are accepting Gen 3 and carbon units as trade-ins.

Video

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals