Kejinming PDB1077BX Bluetooth Headphone Instructions

Kejinming PDB1077BX Bluetooth Headphone

Product Specifications

• DC IN Port for charging
• Volume and Skip controls
• Power button for device operation
• Pause & Call function
• Connect/disconnect feature
• Microphone for calls
• LED indicator light for status

Product Usage Instructions

1. Charging: Connect the Micro-USB to USB power cable to the DC IN port to charge the battery.
2. Volume and Skip: Short press the volume buttons to adjust volume, long press to skip tracks or chapters.
3. Power Button: Press and hold for 3 seconds to start up or turn off the device.
4. Pause & Call: Press the designated button to play/pause music, answer or hang up calls.
5. Connect/Disconnect: Double press the button to connect/disconnect from other devices.
6. Microphone: Use the built-in microphone for calls.
7. LED Indicator: Different light signals indicate various statuses – Power ON, Pairing Bluetooth, Bluetooth Paired, Charging Battery, Charging Complete.

Frequently Asked Questions (FAQ)

• How do I know when the battery is fully charged?
  The LED indicator will stop flashing and remain solid red when the battery is fully charged.

• Can I use the device while it is charging?
  Yes, you can use the device while it is charging, but it is recommended to let it charge fully for optimal battery life.

• How do I pair the device with my Bluetooth-enabled device?
  Ensure the LED indicator is flashing blue/red, then search for the device on your Bluetooth settings and pair them.

BUTTON INDENTIFICATION

1. DC IN Port
   Connect Micro-USB to USB power cable (included) to charge battery.

2. Volume and Skip forward/backward
   Short press to adjust the volume level,long press to skip tracks or chapters.

3. Power cotton
   Press 3 seconds to start up or turn off the device

4. Pause & call
   Press to play or pause, answer incoming call or hang up the phone call

5. Connect/disconnect
   Double press to connect other device or disconnect other device.

6. Microphone

7. LED indicator Light

   • Power ON + Pairing Bluetooth – Flashing blue/red light. Bluetooth Paired – Solid blue light.
   • Charging Battery – Flash red light.
   • Charging Complete – No lights.

FCC Caution

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions

1. This device may not cause harmful interference
2. this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>