GUBCUB V12 Car Cigarette Lighter User Manual
- September 6, 2024
- GUBCUB
Table of Contents
GUBCUB V12 Car Cigarette Lighter
Specifications
- Compliance: Part 15 of FCC Rules
- Operation Conditions: Avoid harmful interference
Product Usage Instructions
Installation
- Ensure the unit is connected to a power outlet on a separate circuit from other devices to prevent interference. Maintain adequate separation between the equipment and receiver for optimal performance
Troubleshooting
- If experiencing issues with interference, consult a qualified radio/TV technician for assistance. Do not attempt to modify the unit without proper approval to avoid voiding the warranty.
Maintenance
- Regularly inspect the unit for any signs of damage or wear. Keep the device clean and free from dust accumulation to ensure longevity.
Product installation
- Plug the USB interface into the USB port in the car.(If you have a car charger, Please insert it into the cigarette lighter) (Picture A)
- Find a preferable place to put the item on the dashboard. ( Picture B)
- After installation, the connection takes 1-3 minutes.
- When the display changes to 0, the satellite positioning is successful.
Then you can use it.
Product Highlights
- Can work on all cars/trucks/buses / E-scooters / E-bikes…
- After connecting the power supply, it will work directly, with no need for any other operation;
- No skip speed, more coherent and smooth display;
- Speed is very accurate, and the speed is refreshed quickly without any delay;
- with Sunshine Hood itself, good review even under the sun;
- Visible both during the day and at night;
- Speed Unit MPH OR KM/H
Colorful button function settings
(This function is only applicable to some models with adjustable colors )
Display color settings;
Short-press the right button, and select a display color each time, and cycle
through all colors.
Speed unit setting kilometers/miles;
Short press the left button, and each time you press it, kilometers and miles
will be displayed in the cycle for selection.
Overspeed Setting;
- Press and hold the right button, and the red speed limit value, flashes, indicating that it has entered the overspeed setting mode. At this time, each short press of the right button will increase 10, and 10~120 will be selected in a cycle
- Each short press of the left button will decrease 10 and 120~10 will be selected. Cycle selection.
Time zone time setting;
Long press the left button, if the satellite positioning is successful, the
time will be displayed, and the hour part of the time zone and time will
flash, indicating that the process has been completed.
Enter the time zone and time setting mode.(If the satellite positioning is not
successful, this setting mode cannot be used. At this time, each short press
of the right button will increase the hour by one Hour, 12~1 cycle selection.
Q&A
Why the machine does not display the number 0?
This is a receiving GPS signal. It needs to be outside the outdoor. Normal
positioning takes 1-3 minutes. Please check whether the power supply supply is
normal when the timeout is not positioned. For equipment placement, please
select the location of the center console A-pillar or B pillar position
FCC
Warning: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE: This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
- This device may not cause harmful interference,
- This device must accept any interference received, including interference that may cause undesired operation.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Frequently Asked Questions
- Q: What should I do if I encounter interference issues?
- A: Increase the separation between the equipment and receiver, and consult a qualified technician if problems persist.
- Q: Can I modify the unit without approval?
- A: No, any changes or modifications not approved may void the warranty and user authority to operate the equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>