IDS AM-800480N6TZQW-T06H LCD Touch Screen User Guide
- June 6, 2024
- IDS
Table of Contents
- KIT CONTENTS
- REQUIRED PARTS NOT SUPPLIED IN THE KIT
- PART 1: CONNECTING THE DRIVER CARD TO THE DISPLAY
- CONNECTING THE DRIVER CARD TO THE POWER SUPPLY AND HDMI SOURCE
- PART 2: CONNECTING THE TOUCH PANEL
- FURTHER INFORMATION
- ABOUT IDS
- INTELLIGENT GROUP SOLUTIONS DIVISIONS
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
IDS AM-800480N6TZQW-T06H LCD Touch Screen User Guide
KIT CONTENTS
REQUIRED PARTS NOT SUPPLIED IN THE KIT
PART 1: CONNECTING THE DRIVER CARD TO THE DISPLAY
Connect the LVDS connector from the driver card to the back of the LCD.
Take care to line up the pins and use the correct orientation as per the
picture below.
It should look like this when the connector is correctly installed.
CONNECTING THE DRIVER CARD TO THE POWER SUPPLY AND HDMI SOURCE
Connect the power connector to the 12V DC power supply using a 2.1mm connector
with centre positive and barrel negative.
Connect the HDMI connector to your source.
Turn the power switch to the ON position.
PART 2: CONNECTING THE TOUCH PANEL
The display has an FFC tail with the USB connections.
Remove any packing foam and tape to release the touch control board from the back of the display.
Place the display face up and line up the small USB connector PCB.
Locate CN4 on the PCB and carefully lift up the flap.
Note the orientation of the FFC and the PCB, it must be connected the correct
way round or damage may occur. Push the FFC tail into
the connector far enough so that the dark strengthening section is all the way
in, and close the flap.
Turn the PCB over and connect a USB Mini lead.
The touch panel can now be connected to a PC and will be automatically installed by MS Windows10.
The FFC tail and controller are very fragile and easily torn. It is
recommended that once connected to the breakout board everything is
secured to the back of the display using tape. This will reduce any strain on
the FPC material.
FURTHER INFORMATION
The values contained in this data sheet can change due to technical innovation. Any such changes will be made without separate notification.
If you require further assistance or have a specific or custom enquiry, please contact the IDS team via email or phone. Alternatively please visit our website for more product info and to see our full range.
Unit 2, Berkshire Business Centre,
Berkshire Drive, Thatcham,
Berkshire, RG19 4EW
+44 (0)1635 294600
ABOUT IDS
Intelligent Display Solutions was established in 2001 by display industry
experts. We have extensive knowledge of both the technical and user interface
approaches to designing displays for various applications, using LCD, TFT and
OLED technologies. We work with our
customers to develop new and innovative displays – some award-winning – to
enhance their products.
IDS is a division of Intelligent Group Solutions Ltd (IGS) – a well- established, respected, industry-leading Optoelectronics solutions provider. Much of IGS’ business comes from providing semi-custom or custom products, both in component and sub-assembly form. We offer design support and prototyping within the European marketplace, with the capability to deliver production displays to wherever in the world the customer’s manufacturing or assembly is being undertaken.
INTELLIGENT GROUP SOLUTIONS DIVISIONS
+44 (0)1635 294600 |info@i-lcd.com |
www.i-lcd.com
Intelligent Display Solutions , Unit 2, Berkshire Business Centre,
Berkshire Drive, Thatcham, Berkshire, RG19 4EW
A division of Intelligent Group Solutions Ltd