BNX TRUFILTER C7092 Cabin Air Filter Installation Guide
- September 5, 2024
- BNX TRUFILTER
Table of Contents
BNX TRUFILTER C7092 Cabin Air Filter
Specifications
- Model: C7092
- Product: Cabin Air Filter
- Location: Behind the Glove Compartment
- Difficulty: Easy
- Install Time: 13 Minutes
Product Usage Instructions
- Turn OFF the engine before installing the cabin filter.
- Locate the cabin filter housing. It is usually located behind the glove compartment. This may require you to remove the glove compartment door to access the cabin filter housing.
- Open the cabin filter housing cover. There are usually tabs or clips that you need to release to open the cover.
- Remove the old filter. Be careful not to drop it as it will be dirty and dusty.
- Place the new filter inside the cabin filter housing, ensuring it is aligned correctly within the housing.
- Secure the cover back onto the cabin filter housing. Reattach the glove compartment door and close it.
FAQ
- Q: How often should I replace the cabin air filter?
- A: It is recommended to replace the cabin air filter every 12,000 to 15,000 miles or as per your vehicle manufacturer’s guidelines.
- Q: Can I clean and reuse the cabin air filter?
- A: It is not advisable to clean and reuse cabin air filters as they are designed for one-time use. Replacing them ensures optimal performance.
- Q: Do I need any special tools to replace the cabin air filter?
- A: No, usually replacing a cabin air filter requires no special tools. However, it’s recommended to consult your vehicle’s manual for specific instructions.
More Info
- Location:
- Behind the Glove Compartment
- Difficulty:
- Easy
- Install Time:
- 13 Minutes
*Please consult your vehicle’s owner’s manual for exact instructions as procedures may vary between models.
Learn More at:
©2023 BNX Converting LLC. All Rights Reserved. Trufilter is a registered trademark of BNX Converting LLC and/or its affiliated entities
Installation Instruction
Turn OFF the engine before installing the cabin filter.
- Locate the cabin filter housing. It is usually located behind the glove compartment. *This may require you to remove the glove compartment door to access the cabin filter housing.
- Open the cabin filter housing cover. There are usually tabs or clips that you need to release to open the cover.
- Remove the old filter. It will be dirty and dusty, so be careful not to drop it.
- Place the new filter inside the cabin filter housing making sure it is aligned correctly within the housing.
- Place the cover back onto the cabin filter housing and secure it. Reattach the glove compartment door and close it.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>