DirectIndustry SCA60V Pet Feeder User Guide
- September 7, 2024
- Directindustry
Table of Contents
SCA60V Pet Feeder
“`html
Specifications:
-
Product Name: Small Appliances Pet Feeder
-
Usage: Household use only
-
Food Compatibility: Dry food with dimensions ranging from 2 to
20 mm in diameter -
Power Source: Alkaline No.1 batteries (non-rechargeable)
-
Temperature Range: -10°C to 55°C for storage
Product Usage Instructions:
Access Point Distribution Network Setup:
-
Switch the distribution network mode to the access point
distribution network as per the key instructions. The LED light
should flash slowly. -
Open the Tuya Smart APP, go to Add Device – Manually Add –
Small Appliances Pet Feeder (Wi-Fi) – Enter WiFi Password – Click
Next, select Slow Flash – Click Connect. Look for the WiFi signal
for SmartLife-XXXX. -
After connecting, return to the previous interface and enter
the distribution network interface. Wait for connection.
Safety Instructions:
-
Children should use the product under parental
supervision. -
Avoid lifting the pet feeder directly using the lid, food
bucket, or food tray; hold the base with both hands. -
Do not immerse any part of the base in water to prevent damage
to electronic components. -
Avoid placing foreign objects, canned, or wet food in the
feeder. -
Use only dry food with dimensions between 2 to 20 mm in
diameter.
Cautions:
-
Avoid pets chewing or swallowing any accessories.
-
Store the pet feeder in areas with temperatures between -10°C
to 55°C. -
Use alkaline No.1 batteries and replace them regularly,
especially before long trips.
Cleaning and Maintenance:
-
To reset and reinitialize the distribution network, press and
hold the Reset key for 6 seconds. -
Clean the feeder base with a soft wet cloth; do not wash it
directly with running water. -
For recording, press and hold the Recording key for 3 seconds;
a beep will indicate recording has started (up to 10 seconds).
FAQ:
Q: Can wet food be used with this pet feeder?
A: No, this pet feeder is suitable only for dry food with
specific dimensions. Wet food should not be placed in the
feeder.
Q: What should I do if the device malfunctions?
A: If there are any malfunctions or damaged parts, do not
attempt to repair the pet feeder yourself. Contact the dealer for
assistance.
“`
Access point distribution network (optional)
Please first switch the distribution network mode to the access point
distribution network as according to the key instructions. The LED light
flashes slowly. The following steps are as follows:
1. Open the Tuya Smart APP, choose “Add Device” – Manually Add – Small
Appliances Pet Feeder (Wi-Fi) – Enter WiFi Password – Click “Next”, select
Slow Flash – Click “Connect” – then find the WiFi signal for SmartLife-XXXX.
2. After connecting, return to the previous interface, and the next step is
to enter the distribution network interface and wait for connection.
Video version
User Guide
Pet Feeder
Please read this user guide before using this product and keep it for reference. This product is for household use only.
Safety instructions
1. Children shall use this product under the supervision of parents.
5. Do not lift the pet feeder directly with the lid, the food bucket or the food tray. Lift
2. Do not use the feeder for pets who cannot reach the food tray or have physical
the base with both hands while keeping the device in an upright position.
disabilities.
6. It is suitable only for dry food with dimensions ranging from 2 to 20 mm in
3. Do not immerse part of the base in water, which may damage electronic
diameter. Larger foods may cause food jams or blockages in the mouth.
components such as the control panel.
7. Please read and follow all the important instructions listed on the pet feeder and
4. Do not place any foreign objects in the pet feeder.
package.
5. Do not place canned or wet food in the feeder.
6. Do not disassemble the device yourself.
7. Do not modify the pet feeder.
8. If this device malfunctions or has damaged parts, do not attempt to repair the pet
feeder yourself. Contact the dealer and resolve it.
9. Unplug the power plug when not using the product or before cleaning it.
10. If the power plug of this device is damp, please turn off the power supply of the
socket. Do not try to unplug the power plug.
Cautions
1. Do not allow pets to chew or swallow any accessories. 2. Do not place pet feeders in exposed areas. The ambient temperature to be stored
should be within the range of-10~55. 3. Please supply power using alkaline No.1 batteries. Do not use rechargeable
batteries. 4. Check the battery regularly. If you are traveling for a long time or on business, be
sure to replace the battery.
01
02
Key descriptions
Cleaning and maintenance
Reset key
Recording key
Press and hold for 6 seconds to reset and reinitialize the distribution For your pet’s health, it is recommended to clean the feeder regularly.
network. A voice prompt will be given: “Beep”
When it getd dirty and the food tank has a lot of loose food, you can remove the food
Press and hold for 6 seconds to switch to the slow blinking or fast bl
cover for cleaning.
inking mode.
Clean the feeder base containing the control panel with a soft wet cloth. Do not wet
Press and hold for 3 seconds to start recording. When you hear a
this part, and remember not to wash it directly with running water.
beep, the red light will light up to start recording (up to 10 seconds).
Release and end the recording. The red light will turn off, and the
recording will automatically play once.
Manual feeding key:
Manual feeding key: Short press 1 to feed 1 serving. Long press for 6 seconds to hear a “beep” as the machine is locked, and long press for 6 seconds to hear a “beep, beep” as the machine is unlocked.
Indicator (white)
1. Flickering: Waiting for the distribution network 2. On: Network connection
successful
Packing List
After opening the product packaging, please confirm whether the pet feeder is
in good condition, and check whether the accessories are complete.
Feeder 1 Power adapter1 Power cord 1 User Guide 1
Indicator (red)
1. On: When powered by dry batteries/recording
03
04
Instructions for Use
1. Assemble the feeder
Remove the feeder from the box and package. Place the feeder within 10 meters
away from the router. Combine the food tray with the fuselage base. Place the
desiccant in the desiccant box above the bucket lid.
2. Supply the power
Insert the 5V/1A power adapter into the wall socket and connect the device.
Open the battery compartment at the bottom of the device and install 3
alkaline No.1 batteries (not mandatory) to prevent power outage.
The red and blue indicator lights are on, indicating that the feeder is
powered on.
Notes: 1) No battery included. 2) Make sure all components are clean
and completely dry before powering on. 05
3. Pour in dry pet food
Pour the appropriate amount of dried pet food into the food bucket and close
the lid. Notes:
- Do not use canned or damp pet food. 2) The recommended pet food size range
is 2-20 millimeters.
4. Record feeding
Press and hold for 3 seconds to start recording. When you hear a beep, the red light will light up to start recording (up to 10 seconds). Release and end the recording. The red light will turn off, and the recording will automatically play once.
Repeat this process each time to change your recording.
Notes: 1) It will only play when recording is pressed. 2) When it’s time to feed, deliver the food and play the recording. 06
5. Press the button to lock/unlock
Long press for 6 seconds to hear a “beep” as the machine is locked, and long
press for 6 seconds to hear a “beep, beep” as the machine is unlocked.
Notes: The feeding button does not work in the locked state and must be
unlocked for normal use. APP operation is not affected in the locked state.
6. Manual feeding
Manual feeding key: Short press 1 to feed 1 serving.
Notes: The feeding schedule will not be affected.
7. Reset
Distribution network mode switching: When powered on without network
configuration, the white indicator defaults to fast flashing (WiFi fast
network configuration mode). Press and hold for 6 seconds to make two beeps,
and the red/white indicator remains on for 6 seconds to switch to slow
flashing (access point network configuration mode). Press and hold repeatedly
to switch between the two distribution modes. 07
Simple troubleshooting
Problems
Solutions
Cannot be configured
WiFi access point names and passwords should not be in Chinese. Please use
access point in the 2.4G WiFi frequency band, which supports both 2.4+5G dual
frequency bands.
Check the entered WiFi password again. The incorrect WiFi password will not be
configured successfully.
The feeder does Please check whether the food tray is full or the food aisle
not feed
is blocked; Regularly clean food outlets and food aisle;
properly or does When the battery supplies power, check whether the
not feed.
battery is exhausted.
Feeder display is offline
Please check the location of the feeder from the router at home, not within 10 meters, not through the wall. The weak WiFi signal in the partition causes the product to go
offline.
First, check if the power adapter is plugged in properly. If
No response
the indicator does not light up after being plugged in,
when powering
check if the power adapter and power cord are loose or
on
damaged. If the issue cannot be resolved, please contact
customer service for assistance.
08
Operations of smart life APP
1. Scan the QR code to download the app, register, and log in
2. Turn on the Bluetooth of the mobile phone, connect the WiFi, enter the App home page and wait for the device to be discovered and added
3. Enter the Wifi password and click Next to wait for the distribution network
4. After the network is configured, you can customize the device name and click Finish
09
10
5. Click Feed, select the corresponding number of servings to feed, up to 20 servings
6. Click on timed feeding to add a timed schedule. You can choose any time from Monday to Sunday, set the number of servings, and save it
7. Click Feed to enter the feeding record, and you can view the feeding record at the corresponding time point
8. Enter the settings page to set basic functional parameters, infrared night vision switch, and detect alarms. You can also share your device with other family members
11
12
QR code mode distribution network
Access point distribution network
1. You can set up “QR code” network configuration. First, please confirm that the visual
feeder is in network configuration mode (after the initial network configuration or reset,
when the device is powered on, it will hear a “ding-dong” sound and the white indicator
will flash)
2. Click the button (Figure 1) to proceed to the next step, then enter the WiFi password
and click confirm. The QR code network configuration guide interface will appear, and
click continue. A QR code will be displayed. Use the device to scan the QR code on your
phone. When you hear the device making a sound, click the button to proceed to the next
step
3. If the distribution network is successful, you can modify the name of the device, or
choose the location of the room
Figure 1
Figure 2
1. After the initial network configuration or long pressing the reset button for 6 seconds, wait for the device to restart for about 1 minute. The white indicator will flash and the device will enter access point mode, emitting a WiFi signal named “SmartLifeXXXXXX” 2. Select the access point distribution network (Figure 1), click Next, then enter the WiFi password and click Confirm to enter the interface shown in Figure 2 3. Then click the “Connect” button, connect to the device access point “SmartLifeXXXXXX”, return to this application, enter the device networking waiting interface. After the device networking is successful, click “Complete” to add the device successfully
Figure 1
Figure 2
13
14
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures: -Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver. -Connect the
equipment into an outlet on a circuit different from that to which the
receiver is connected. -Consult the dealer or an experienced radio/TV
technician for help. -This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment. This equipment should be
installed and operated with minimum distance 20cm between the radiator & your
body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>