Wireless Routers 2BKHD-B625 4G CPE Router Modem User Manual

Wireless Routers 2BKHD-B625 4G CPE Router Modem

Product Information

Specifications:

• Compliance: Part 15 of FCC Rules
• Radiation Exposure Limits: FCC compliant for uncontrolled environment
• Minimum Distance: 20cm between radiator and body

Product Usage Instructions

Installation:

1. Place the device on a stable surface.
2. Ensure there is a minimum distance of 20cm between the radiator of the device and your body.

Operation:

1. Power on the device using the designated power button.
2. Follow the user manual for specific operational instructions based on your intended use.

Maintenance:

1. Keep the device clean and free from dust or debris.
2. Avoid exposing the device to extreme temperatures or moisture.

FAQ

• Q: Can I modify the device?
  A: Any changes or modifications not approved by the manufacturer could void your warranty and authority to operate the equipment.

• Q: What should I do if I experience interference?
  A: Ensure the device is operated in compliance with the minimum distance requirement of 20cm between the radiator and your body. If interference persists, contact customer support for further assistance.

Overview

• A 4G routing terminal device equipped with ASR platform 4G \vireless co11ll1lunication 1uodule. Supports 2.4G V.’IFI, V.’PS, lJSB2.0, and other functions.
• The device provides Wi-Fi AP functionality. \IVi Fi SSlD default nan1e is B625 . – xxxx (xxxx is the last 4 digits of the l\1AC address), \Vith a default J>assword of l 2345(i78
• The dei11ult address of the device is ll/2.168.1.1, login http:/il 92.168. 1.1 The WEllUI 1nanage1nen1 page allows for various settings, with an initial login account password of adn1in: admin.

Notes:

1. Lithium battery power supply can support a maximum battery voltage of 4.35V.
2. USB input power supply is 5V1A.
3. Support button startup.
4. Support WPS function. (depending on the model)
5. Support the Factory reset button.
6. Before using the WEBUI management function, please clear the browser’s browsing history.
7. Supports one LAN port

WEBUI Management System

Pressing and holding the power button for more than 3 seconds can turn on the device and work. The WEBUI management page supports mainstream browsers such as Internet Explorer 11 and higher, Firefox, Chrome, and Safari.

Introduction to basic functions

• The computer (phone) is connected to the device’s WIFI hotspot through a network cable or WIFI. The interface after the user logs in by entering “192.168.1.1” in the browser Initial login account admin and password admin.
• For the first login, you can choose to quickly set the basic routing functions in sequence, or skip and directly enter the page

Enter the page to view the basic information and status of the device

Network mode and connection status
Network mode, PIN code management, flow statistics and flow limit can be set

Internet APN setting function
APN setting function, the device has preset most of the operator’s APN-related settings, and the APN can be automatically matched by setting it to automatic selection mode, At this point, the APN can be manually set. You need to remove the check mark before automatically adapting to APN and click Save. If you still cannot access the network after setting the APN according to the requirements of the SIM card operator, you can try to modify the authentication type. The two authentication types are different, and you can try both.

Home Network
This page can configure the gateway address of the device, the IP address connected to this device and the number of connected devices, and can limit the connection of WiFi devices, etc.

Wireless Settings
You can set WiFi name and password, hidden WiFi, encryption type maximum number of simultaneous connections, etc.

Router Management
You can view account information, Factory reset, restart the device and other operations

Common faults and analysis

FCC

This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses, and can radiateradio frequency energy and, if not installed and used by the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution : Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>