BITDOORCCD100 Lutopix Smart Camera User Guide
- September 5, 2024
- BITDOOR
Table of Contents
BITDOORCCD100 Lutopix Smart Camera
Product Specifications
- Product Name : Lutopix Smart Camera – AM108
- Model Number: AM108
- Manufacturer: Shenzhen Bitdoor Technology Co., Ltd.
- Address: Room 613A, XiWan building, No.15th Jin Hai Road, Xixiang Street, Baoan District, Shenzhen City, China
- RF Specifications:
- WIFI Frequencies: 2.4G, 5.2G, 5.3G, 5.6G, 5.8G
- Operation Frequency: 2412-2472MHz; 5180-5240MHz; 5260-5320MHz; 5500-5700MHz; 5745-5825MHz
- Max RF Output Power: 17.32 dBm, 12.49 dBm, 11.23 dBm, 12.45 dBm, 12.99 dBm
- EU Declaration of Conformity: Yes
Product Usage Instructions
Downloading the APP and Initial Setup:
- Scan the QR code provided in the manual to download the APP on your smartphone.
- Register and login to the APP.
Connecting the Camera:
- Click on ‘Add Device’ in the APP and select ‘Camera’.
- Reset the camera by inserting a needle into the reset hole until you hear a sound.
- Scan the QR code on the camera using your smartphone.
- Select your Wi-Fi network, enter the password, and press ‘NEXT’.
- Use the camera to scan the QR code displayed on your phone to configure the network automatically.
Installation:
- Bind the camera to the door opener.
- Install the bottom base steel plate provided in the box.
- Set up the camera according to your preferences.
EU Declaration of Conformity
The wireless camera complies with the essential requirements of Directive
2014/53/EU and is restricted for indoor use within the 5.15-5.35GHz RLAN band.
Please scan the above QR code for other languages
In the box
| Camera | x1 |
|---|---|
| Power connection cable (USB + TYPE C) | x1 |
| Bottom base steel plate | x1 |
| Screw bag | x1 |
| User manual | x1 |
Parameter
- Product name : Smart Camera
- Product model : AM108
- Maximum resolution: 2304*1296
- Lens specifications: HD lens 2.8mm@F2.0
- Viewing range : horizontal 120º, vertical 105º
- Day / Night: support IR-CUT automatic switching
- NETCOM: WIFI 802.11 b/g/n/a 2.4G+5G
- Storage: Cloud storage / T card storage compatible
- Power supply: 5V DC – 24V DC(±10%)
- Speaker: 2W digital speaker
- Microphone: 2 * MIC digital noise reduction
- Temperature range: -10℃ – ＋ 50℃
- Class of protection: IP66
- Net weight : 450g
USINF INSTRUCTION
- Scan the QR code below by your smartphone to download the APP, register, and log in.
- To connect to the APP, follow steps 1 – 6, to install & wire, follow steps 7-9.
Reset the device
Scan the QR code on the camera
Select the Wi-Fi & enter password then press ‘NEXT’, there will be a QR code shown on your cell phone.
Use the camera to scan the QR code that appears on your phone. The scan is successful when you hear ‘di’. The camera will configure network automatically, this process will take about 20 seconds.
FCC
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference,
- this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, under Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used by the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines.
This equipment should be installed and operated with a minimum distance
between 20cm of the radiator and your body: Use only the supplied antenna.
- Manufacturer’s Name: Shenzhen Bitdoor Technology Co., Ltd.
- Address: Room 613A, XiWan building, No.15th Jin Hai Road, Xixiang Street, Baoan District, Shenzhen City, China
- Applicant’s Name: Shenzhen Bitdoor Technology Co., Ltd.
- Address: Room 613A, XiWan building, No.15th Jin Hai Road, Xixiang Street, Baoan District, Shenzhen City, China
- Product Name: Smart Camera
- Trade Mark: N/A
- Model number: AM108
This device complies with the essential requirements and other relevant provisions of Directive 2014/53/EU. All essential radio test suites have been carried out. The device complies with RF specifications when the device used at 20cm from your body. The product shall only be connected to a USB interface of version USB2.0
RF Specification:
EU Declaration of Conformity
We, Shenzhen bitdoor Technology Co., Ltd. (Room 613A, XiWan building, No.15th
Jin Hai Road, XiXiang Street, BaoAn District, Shenzhen City, China) hereby
declare that this Wireless camera complies with the essential requirements and
other relevant provisions of Directive 2014/53/EU.
The use of the 5.15-5.35GHz RLAN band is restricted to indoor use. This restriction will be applied to all Member States of the European Union.
Frequently Asked Questions
- Q: How can I reset the camera?
- A: To reset the camera, insert a needle into the reset hole until you hear a sound indicating the reset process has started.
- Q: What should I do if I encounter issues during the installation process?
- A: If you face any difficulties during installation, please refer to the user manual or contact customer support for assistance.