Yeolet M7 Electric Spin Scrubber User Manual
- June 17, 2024
- Yeolet
Table of Contents
Electric Spin Scrubber M7
User Manual
Please read it carefully before using and keep it well
PRODUCT INTRODUCTION
- Power Button
- LED Indicator
- Main Handle
- Charging Cover & Port
- Extension Rod
- Angle Adjustment Button
- Scrubber Head
ASSEMBLY
Assemble the brush head:
Aligned with the buckle and inserted.
Change brush:
Hold the brush head by hand and pull it out, then insert other brush heads.
Assembly Disassembly
Power switch
The spin scrubber sets two speeds
- Press the power button once, brush will rotate 250 rpm/min
- Press the power button again, brush will rotate 300 rpm/min
- Press the power button for the third time, the product will shut down
Extension rod Installation
Lnsert as directed and rotate in the direction of the drop lock
INSTRUCTIONS
On/Off
Press the power switch to adjust speed, press once for low speed, a letter
L lights up. press twice for high speed, a letter H lights up, press three
times for shutdown.
-
Note: Do not overuse, or it will be turned off automatically, please turn it on again when reusing.
- Water line
Waterproof instruction
The part under Angle Adjustment Button is IPX7 waterproof, can be used in
water. The part above Angle Adjustment Button is IPX4 waterproof, can not be
submerged into water.
- Please mind the water depth when using.
- Do not put the entire Electric Spin Scrubber into the water.
Axis of rotation
The rotating shaft can be adjusted in three angles, the maximum angle is 180°,
and the angle of the cleaning machine can be adjusted according to specific
needs during use.
How to rotate
Press and hold the rotary buttons on both sides with one hand, and turn the
brush head with the other hand. After a damping feeling, release the hand to
fix it.
Extension rod
The product is a three section a design, and the length can reach 44.2in after
inserting the extension rod;
Safe charging
The charging port is on the back of the handle. When charging, the display
will light up, after the power display is full indicating that is fully
charged.
ATTENTIONS
- The product is made to be used in household cleaning, don’ t use it in industry or harsh environments.
- Only the part of the brushes are waterproof, the other parts can not be submerged in water.
- Please turn off and turn on again when it gets stuck.
- Don’t use when the adapter is damaged
- The product is not suitable for children.
- Don’t use on people or animals
- Don’ t put the charger near any hot places
- Don’ t use any other batteries and adapters.
- Don’ t disassemble it to repair by yourself
- If you haven’t use it for a long time, please charge it and place in a cool dry place; and charge it every 6 months to avoid any damage.
- Please use the product according to this manual, if any damages are caused by misuse, the user takes all responsibilities.
PARAMETERS
| Appearance | Model | M7 |
|---|---|---|
| Length | 750mm / 1122mm | |
| Material | ABS+TPR+PP | |
| N.W | 1.5kg | |
| Parameters | Working time | 2H±0.5 |
| Charging time | 2.5hrs | |
| Operating noise | <70dB | |
| Operating temperature | 0-45°C | |
| Max Power | 74W | |
| torque | 45kgf.cm | |
| Battery | Speed | Low-end ≥ 250 rpm/min |
Heigh-end ≥ 300 rpm/min
Battery volume| 2000mAh
Output voltage| 7.4V DC
Charging voltage| 5V/2A DC
Others| Waterproof| IPX7/IPX4
TROUBLE SHOOTING
| Does not work | The battery is low, please charge before use. |
|---|---|
| Can not be recharged | The charging indicator is not on, check charging cable |
is plugged in correctly or not.
Brush head shedding| The brush head does not rotate or falls off, please check
the brush head is firmly inserted or not
Power on does not work| Please confirm whether it is in charge state, unplug
the charging plug and restart.
Stop work| Stop while cleaning, Please restart or check the battery is out of
power.
FCC STATEMENT
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>