LFS FLS-164 Wireless Speaker User Manual
- June 5, 2024
- LFS
Table of Contents
LFS FLS-164 Wireless Speaker
Sockets and Function Keys
- Power/Handsfree
- LED Indicator Function
- Mode Switch
- Pause/Play&TWS
- Volume Up/Next Track
- Volume Down/Previous Track
- USB charging slot
- USB interface
- Microphone
- AUX Input .TF card slot
Power/Handsfree Button
Power ON/OFF – Press and hold for 3 seconds Answer Call – Press once to
Answer/ End Call Call – Press twice to call the most recent number
Mode Button
Switch between 3 modes – Micro SD Card（TF card), AUX-in, USB, and Bluetooth
Play/Pause
Press once to Play/Pause
Volume Up/ Next Track Button
Next Track – Press and hold Volume Up – Press Once
Volume Down/ Previous Track Button
Previous Track – Press and hold volume Down – Press Once
Operational Guide
Connecting the speaker to your Device Turn on the speaker, it will automatically enters pairing mode. If the unit has been paired with your device previously, it will automatically search and connect to that device. If no device has been paired before, upon being turned on, the unit will enter pairing mode.To pair the speaker to your device, turn on the bluetooth setting on your device and search for nearby devices. Select “LFS-OCEAN” in the list of available devices. If your device requires a password,enter 0000. Once successfully paired, you should hear the “Connected” voice prompt. You may only connect the speaker to one device at a time.
True Wireless Stereo (TWS)
Under Bluetooth mode,To Pair – Press and hold Pause/Play button for 3
seconds To Unpair – Press and hold Pause/Play button for 3 seconds To pair two
‘’LFS-OCEAN” together, first ensure both speakers are turned on.Press and hold
Pause/Play button for 3 seconds on either speaker to enter TWS Pairing mode.
Pairing should take a few seconds.Once pairing is successful,you will hear
“connected”.To disconnect TWS, Press and hold the Pause/Play button for 3
seconds.You should hear “Disconnected”.
Note
- This TWS function is based on two speaker using together, only one speaker cannot realize it,you need to buy another one.
- lf you have paired one speaker before, there will be a”LFS-OCEAN” shown on your bluetooth setting.if you cannot connect the twin speaker ‘LFS-OCEAN”, please delete the earlier”LFS-OCEAN” on your bluetooth setting ,tum off the bluetooth on your mobile device and tum on again, after the two-speaker connected with each other,search for new”LFS-OCEAN” on the bluetooth setting and make a pair, then the mobile device will oonnect with twin speaker, the twin speaker can play music sync.
Specifications
- Material: ABS Plastic+ Metal
- Charging Voltage: DC5V Frequency: 100Hz – 20KHz
- Operation Range: 33feet / 10m
Package Includes
- Bluetooth speaker
- USB charging cable
- Audio Cable
- User Manual
- Lanyard
Important Safety Instructions
- Please store and use the product in room temperature.
- Do not drop or bump the product.
- Do not disassemble, modify or attempt to repair the product on your own.
- Please use the rated voltage to charge your speaker.
- Avoid playing music at high volume for long periods of time as it may cause hearing damage,
- Disassembling this product will void the warranty.
Usage Tips
- Make sure your phone, tablet, laptop or other desktop device is Bluetooth- enabled.
- The operational range of the speaker may be influenced by obstructions like walls,pillars, etc. To ensure a stable connection, we recommend avoiding such obstructions whenever possible and/or shortening the distance during use.
- Power off the speaker when not in use .
- The speaker will send alert when the battery voltage is low.
- Exceptions may occur when misoperation happens or the battery is too low. Please fully charge battery and turn on the on/off button to reset.
FCC IC warning statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution:
Any changes or modifications to this device not explicitly approved by the
manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: This device may not cause harmful interference,
and this device must accept any interference received, including interference
that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>