DAF NGD Corner Panels Wind Deflectors Instructions
- September 5, 2024
- DAF
Table of Contents
DAF NGD Corner Panels Wind Deflectors
Specifications
- Product: DAFNGDCORNERPANELS/ WINDDEFLECTORSXG/ XG+
- Material: Durable plastic
- Color: Black
- Package Contents: 12 XM6 bolts (Torx30), 12 washers (15mm)
FAQs
- Q: Can I install the corner panels and wind deflectors on my own?
- A: Yes, you can follow the detailed fitting instructions provided in the manual to install them correctly.
- Q: Do I need any special tools for the installation?
- A: You will need a 6mm drill, an 8mm drill, and a Torx30 screwdriver for installation.
- Q: Can I paint the corner panels and wind deflectors to match my vehicle color?
- A: Yes, the parts need to be primed and painted after installation for a customized look.
EXCLUSIVE TRUCK PARTS
FITTING INSTRUCTIONS
DAF NGD CORNER PANELS / WIND DEFLECTORS XG / XG+
ATTACH THE TEMPLATE TO THE REMOVED CORNER PANEL
FOLLOW THE LINES OF THE TEMPLATE. TEMPLATE HAS A LEFT AND A RIGHT.
DRILL THE HOLES AS MARKED ON THE TEMPLATE. START WIL A 6 MM DRILL
THEN ENLARGE THE HOLES WITH AN 8 MM DRILL
REMOVE THE TEMPLATE. 6 HOLES ARE VISIBLE IN THIS ARRANGEMENT
ENLARGE THE HOLES ON THE INSIDE OF THE CORNER PANEL, ONLY THE HOLES WHERE THERE IS A DOUBLE SKIN. THIS TO BE ACCESSED WITH A NUT AN WASHER
NGD WITH REMOVED CORNER PANEL
THE WIND DEFLECTOR IS FIXED WITH 6 NUTS AND 6 WASHERS PER SIDE
THE SET CONTAINS 12 X M6 BOLTS ( TORX 30 ) AND 12 WASHERS 15
THE CORNER PANEL FOLLOWS THE CABIN LINE NICELY
FIRST TEST FIT, BEFORE PAINTING. PART NEEDS PRIMER AND PAINT.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>