Juniper BLLBFV2,BLLOSV2 Laminate Low Lateral Installation Guide
- September 5, 2024
- JUNIPer
Table of Contents
Juniper BLLBFV2,BLLOSV2 Laminate Low Lateral
Open Shelf
Overview
Laminate Low Lateral
All parts listed are for a single open-shelf lateral; additional parts will be needed for additional open-shelf lateral.\
Parts List
*If installing a merging topper, disregard top panel item.
Installation Instructions Open Shelf
Screw Cam Pins into Bottom Panel
- Requires 6 cam pins.
Insert Hardware into End Panels
- Requires 4 wooden dowels, 4 cam locks, and 4 cam pins.
Insert Hardware into Back Panel
- Requires 2 cam pins and 8 cam locks.
Insert Cam Locks into Fixed Shelf
- Requires 6 cam locks.
Secure Fixed Shelf to Back Panel
- Align cam pins so they sit inside of open cam locks. Use a screwdriver to turn cam locks clockwise and lock into place.
Secure End Panels
- If working with a surface 72” or longer, use 10 wood screws to install support bar under surface.
Secure Bottom Panel
- Align cam pins so they sit inside of open cam locks. Use a screwdriver to turn cam locks clockwise and lock into place.
Secure Top Panel
- Note: DO NOT Install top panel if you are merging storage.
- Align cam pins so that they sit inside of open cam locks. Use a screwdriver to turn cam locks clockwise and lock into place.
Secure Feet to Bottom Panel
- Attach corner feet to bottom panel with 4 wood screws per foot.
Box/File
Overview
Laminate Low Lateral
All parts listed are for a single low box/file lateral; additional parts will be needed for additional low box/file laterals.
Parts List
INSTALLATION INSTRUCTIONS Box/File
Secure Feet to Storage and Flip
- Flip storage piece so it is laying on its back; secure foot to each corner using 4 wood screws.
Attach Handles
- Using 2 bolts each, attach handles to front of drawers.
Merging Top
Overview
Laminate Low Lateral
All parts listed are for a single merging top; additional parts will be needed for additional merging tops.
Parts List
INSTALLATION INSTRUCTION Merging Top
Remove Drawers From Low Box/File Lateral
Remove Storage Top
- Locate the 6 cam locks across top edge on inside of storage piece. Then, use a screwdriver to turn cam locks counterclockwise to unlock. Carefully lift top from storage.
Connect Brackets to Top Panel
- Attach 12 laminate storage L-brackets to inside of storage using wood screws in places shown below.
Attach Top to Storage
- Set storage side-by-side then align top panel so it is flush with sides, back, and front of storage. Secure 12 laminate storage L-brackets to top panel using wood screws.
Insert Drawers
FAQ
Frequently Asked Questions
- Q: Do I need additional parts for multiple units?
- A: Yes, for each additional open-shelf lateral or low box/file lateral, you will need the respective additional parts listed in the manual.
- Q: Can I install the top panel if I am merging storage?
- A: No, do not install the top panel if you are merging storage as per the instructions provided.
- Q: How many wood screws are needed per corner foot?
- A: Four wood screws are required per corner foot for secure attachment.
Contact
© 2023 Juniper Office | Version 23.0.0
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>