HIGHLANDS JC11140_X3 UTV Rear Cargo Box Owner’s Manual
- September 4, 2024
- HIGHLANDS
Table of Contents
HIGHLANDS JC11140_X3 UTV Rear Cargo Box Owner’s Manual
Parts Included
| Part # | Qty. | Item |
|---|---|---|
| 1 | 1 | HIGHLANDS JC11140_X3 Cargo Box |
| 2 | 4 | JC_Anchor_3 |
INSTALLATION INSTRUCTIONS
- Open your new HIGHLANDS cargo box and locate the four drilled holes on the bottom of the box.
- Unthread the four included anchors and put the threaded hand knob and washer inside the box through the drilled holes.
- Loosely re-thread the rubber section to the hand knob on the bottom side of the cargo box.
- Place the cargo box into the bed of your machine. It may take a few tries to carefully lower the box so the anchors enter into the lock and ride holes of your machine.
- Once the box is fully seated in the bed, open the box and tighten the hand knobs until there is no movement of the box.
www.motoalliance.com
motoinfo@motoalliance.com
866.527.7637 Rogers, MN
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>