Juniper Acuity Desk Office Furniture Installation Guide
- September 5, 2024
- JUNIPer
Table of Contents
Acuity Desk Office Furniture
“`html
Product Specifications:
- Product Name: Acuity Desk
- Installation: General Installation Guide
- Leg Type: Angled Sleigh Legs
- Leg Screws: 15 screws per leg
- Support Bar(s): Included
Product Usage Instructions:
1. Prepare Surface:
Carefully place the surface upside-down on the floor, preferably
on a cushioned area. Measure from the surface edge to determine the
placement of the legs.
2. Install Angled Sleigh Legs:
Follow the measurements taken in step 1 and insert 15 screws per
leg through the metal plate and into the laminate surface. Note
that on smaller surfaces, the leg plate may cover the grommet
hole.
3. Install Surface Support Bar(s):
Install the surface support bar(s) according to the provided
instructions to ensure stability and support for the desk.
Frequently Asked Questions (FAQ):
Q: Can I install the desk on a carpeted floor?
A: It is recommended to install the desk on a solid, flat
surface for stability. However, if installing on carpet, ensure the
legs are securely attached to prevent wobbling.
Q: Are additional screws provided in case of loss or
damage?
A: The package includes extra screws for assembly. If more are
needed, please contact customer support for assistance.
“`
Acuity Desk
General Installation Guide
ACUITY DESK
1 | Prepare Surface
Carefully place surface upside-down on floor, a cushioned area is preferred.
Measure from surface edge to determine leg placement.
7.5″
2 | Install Angled Sleigh Legs
Follow measure measurement and insert 15 screws per leg through metal plate
and into laminate surface. Note: On smaller surfaces, leg plate will cover
grommet hole.
ii
END OF ACUITY DESK SECTION
3 | Install Surface Support Bar(s)
iii
1-866-999-0955 | hello@juniperoffice.com | juniperoffice.com © 2023 Juniper Office | Version 23.0.0
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>