Juniper BLCC Conference Credenza Office Furniture Installation Guide

: September 5, 2024
: JUNIPer

Table of Contents

BLCC Conference Credenza Office Furniture
Product Specifications:
Product Usage Instructions:
1. Insert Hardware into Bottom Panel
2. Insert Hardware into Top Panel
- Frequently Asked Questions:
Q: How do I secure the back panel to the assembled
Q: What should I do if my credenza has a custom top panel?

BLCC Conference Credenza Office Furniture

“`html

Product Specifications:

Model: BLCC * Product Name: Conference Credenza
Parts Included:
- Bottom Panel
- Top Panel
- End Panel (2 pieces)
- Center Support Panel
- Back Panel
- Fixed Shelf 1
- Fixed Shelf 2
- Door (4 pieces)
- Wooden Dowel (14 pieces)
- Cam Lock (34 pieces)
- Cam Pin (30 pieces)
- Connecting Rod (2 pieces)
- Cam Cover (34 pieces)
- Corner Foot (4 pieces)
- Center Footer (1 piece)
- Wood Screw 1 (28 pieces)
- Wood Screw 2 (48 pieces)
- Handle w/ Screws (4 pieces)
- Lock (2 pieces)
- Corner Bracket (4 pieces)
- Latch (2 pieces)
- Custom FX Top Panel* (1 piece)
- Plastic L-Bracket (12 pieces)
- Wood Screws (24 pieces)

Product Usage Instructions:

1. Insert Hardware into Bottom Panel

Using a screwdriver, secure 8 cam pins into pre-drilled holes on
the bottom panel of the credenza.

2. Insert Hardware into Top Panel

Using a screwdriver, secure 8 cam pins into pre-drilled holes on
the top panel of the credenza.

Frequently Asked Questions:

Q: How do I secure the back panel to the assembled

structure?

A: Align cam pins with open cam locks on the
assembled structure. Using a screwdriver, turn 6 cam locks to lock
cam pins in place.

Q: What should I do if my credenza has a custom top panel?

A: Drill 2.5 deep holes with a 5/16 drill bit.
Holes should be positioned 17 5/8 inches from the left edge, 16 3/8
inches from the right edge, and 7 inches from the bottom edge.

“`

BLCC##
Conference Credenza
General Installation Guide

Parts List

Code

Qty.

Description

BLCC 1

Bottom Panel

1

Top Panel

2

End Panel

1

Center Support Panel

1

Back Panel

1

Fixed Shelf 1

1

Fixed Shelf 2

4

Door

14

Wooden Dowel

34

Cam Lock

30

Cam Pin

2

Connecting Rod

1

CREDENZA

Code

Qty.

Description

34

Cam Cover

4

Corner Foot

1

Center Footer

BLCC 28

Wood Screw 1

48

Wood Screw 2

4

Handle w/ Screws

2

Lock

4

Corner Bracket

2

Latch

WALAMCC.X

1

Custom FX Top Panel*

12

Plastic L-Bracket

Kit-LCCB

24

Wood Screws

*If applicable. FX Top Panel does not include pre-drilled holes.

2

CREDENZA

1 | Insert Hardware into Bottom Panel
Using a screwdriver, secure 8 cam pins into pre-drilled holes on bottom panel of credenza.
Cam Pin
2 | Insert Hardware into Top Panel
Using a screwdriver, secure 8 cam pins into pre-drilled holes on top panel of credenza.
Cam Pin
3

CREDENZA

3 | Insert Hardware into Fixed Shelf
Using a screwdriver, secure 4 cam pins into pre-drilled holes as they are shown below, for each panel. Insert 4 wooden dowels and 4 cam locks into pre- drilled holes at top and bottom of panel. Note: Repeat steps for both side panels.
Wooden Dowel

Cam Lock

Cam Pin
4

CREDENZA

4 | Insert Hardware into Center Support Panel
Insert 4 wooden dowels and 6 cam locks into pre-drilled holes in panel.

Cam Lock

Wooden Dowel

5 | Insert Hardware into Back Panel
Using a screwdriver, secure 6 cam pins and 8 cam locks into pre-drilled holes in panel.

Cam Lock

Cam Pin

5

CREDENZA

6 | Insert Hardware into Fixed Shelf #1
Insert 2 wooden dowels into pre-drilled holes at bottom of panel. Insert 6 cam locks into pre-drilled holes on side of panel.

Cam Lock

Wooden Dowel

7 | Insert Hardware into Fixed Shelf #2
Insert 6 cam locks into pre-drilled holes at top and bottom of panel. Note: Repeat steps for both side panels.

Cam Lock
6

CREDENZA

8 | Secure Fixed Shelves to Center Support Panel
Pass 2 wooden dowels and 2 connecting rods through center support panel and insert into sides of both of fixed shelf panels. Using a screwdriver, turn 4 cam locks to lock connecting rods in place.

Wooden Dowel

Connecting Rod

Tighten Cams

7

CREDENZA

9 | Secure Back Panel to Assembled Structure
Align cam pins with open cam locks on assembled structure. Using a screwdriver, turn 6 cam locks to lock cam pins in place.
Tighten Cams
10 | Secure End Panels to Assembled Structure
Align cam pins with open cam locks on assembled structure. Using a screwdriver, turn 8 cam locks to lock cam pins in place.
Tighten Cam Locks
8

CREDENZA

11 | Secure Bottom Panel to Assembled Structure
Align the cam pins with open cam locks on assembled structure. Using a screwdriver, turn 8 cam locks to lock cam pins in place.
Tighten Cam Locks
12 | Secure Top Panel to Assembled Structure
(A) Quick-Ship (1″ Thick) Top: Align cam pins with open cam locks on assembled structure. Using a screwdriver, turn 8 cam locks to lock cam pins in place. Note: If Credenza has an 1.25″ top, skip to 12B.
Tighten Cam Locks
9

CREDENZA

(B) Custom (1.25″ Thick) Top: Drill 2.5″ deep holes with a 5/16″ drill bit. Holes should be 17 5/8″ from the left edge, 16 3/8″ from right edge and 7″ from bottom edge.

13

1 4

”

14

13 16

”

17

5 8

”

13

3 16

”

14

13 16

”

16

3 8

”

1 156″

1161″

1″

1 156″

1161″

1″

Attach corner braces in location shown below. Insert 2 wood screws through each of corner braces into top and side panels.

10

CREDENZA

13 | Secure Feet to Bottom Panel
Attach corner feet and center foot to bottom panel with 4 wood screws per foot. Cover all exposed cam locks with cam covers.
14 | Secure Doors to Credenza
Use 4 wood screws to side and center panels.
11

CREDENZA

15 | Secure Locks and Latches to Doors
Align cam pins with open cam locks on assembled structure. Using a screwdriver, turn 6 cam locks to lock cam pins in place.
16 | Attach Corner Brackets to the Top Panel
Attach brackets to underside of top panel using 2 wood screws each.
12

CREDENZA

17 | Attach Handles to Each Door
Attach using 2 wood screws for each handle.
18 | Assembly Complete
13

14

END OF CREDENZA SECTION