dahua DHI-VTO2211G-WP-S2 IP and Wi-Fi Villa Door Station Owner’s Manual

: September 4, 2024
: Dahua

Table of Contents

dahua DHI-VTO2211G-WP-S2 IP and Wi-Fi Villa Door Station

Specifications

System

Main Processor Embedded Processor
Operating System Embedded Linux OS
Button Type Mechanical
Number of Buttons 1
Interoperability ONVIF; CGI
Network Protocol IPv4; RTSP; UDP; DNS; P2P; RTP; TCP; SIP

Basic

Camera 1/2.8″ 2 MP CMOS high definition, low illumination/ WDR/color/IR
Field of View H: 125°; V: 71°; D: 142°
WDR 120 dB
Noise Reduction 3D NR
Video Compression H.264; H.265
Video Resolution Main stream: 720p, WVGA, D1, CIF
Sub stream: 1080p, WVGA, D1, QVGA, CIF
Video Frame Rate PAL: 25 fps;
NTSC: 30 fps
Video Bit Rate 256 Kbps–8 Mbps
Light Compensation Auto IR
Day/Night Auto(ICR)/Color/B/W;Color/B/W
Audio Compression G.711a; G.711u; PCM
Audio Input 1
Audio Output Built-in speaker
Thin lightweight design.
Supports IR illumination and night vision.
Two-way audio and voice call through app.
Can be managed through the management platform; support voice call between App and the door station.
Card unlock, unlock on the indoor monitor, and remote unlock through the App.
Supports IP65 (Silicone sealant is needed. For details, see the quick start guide).
Supports 10000 cards.
Supports standard PoE power supply.
Controls two locks.
Supports wireless network.

Audio Mode Two-way audio

Audio Enhancement Echo suppression/digital noise reduction
Audio Bit Rate 16 KHz, 16 Bit

Function

Communication Mode Full digital
Unlock Mode Card; app; indoor monitor
Card Type IC card
Auto Snapshot Yes
Leave Videos Yes (SD card is inserted in the indoor monitor or door station)

Wi-Fi Yes

Wireless Standard IEEE802.11b/802.11g/802.11n
Wireless Frequency Range 2.4GHz
Storage Supports Micro SD card (up to 256 GB)
Web Configuration Yes

Performance

Card Reading Distance 0 cm–4.3 cm (0″–1.69″)
Issue Card Locally Yes
Casing Material PC + Acrylic

Capacity

Card Capacity 10000

Port

RS-485 1
Alarm Input 1
Alarm Output 1
Power Output 1 port, 12 V and 200 mA
Exit Button 1
Door Status Detection 1
Lock Control 1 port, normally closed by default
Network Port 1 × 10/100 Mbps network port

Alarm

Tamper Alarm Yes

General

Appearance Color Black plate and silvery frames
Power Supply 12 VDC, 1 A
Standard PoE
Power Adapter Optional
Installation Surface Mount
Certifications CE
Accessory Included: Alarm power ribbon cable, brackets
Product Dimensions 150.0 mm × 100.0 mm × 25.4 mm (5.91” × 3.94” × 1.00”)
Protection IP65 (silicone sealant is needed, see the quick start guide)
Operating Temperature –30 °C to +60 °C (–22 °F to +140 °F)
Operating Humidity 10%–90% (RH), non-condensing
Operating Environment Outdoor
Operating Altitude Beneath 3000 m (9842.52 ft)
Power Consumption ≤ 1 W (standby), ≤ 7 W (working)
Gross Weight 510 g (1.12 lb)
Anti-corrosion Level Basic Protection

Installation

Follow the installation guide provided in the manual for the proper setup of the Wi-Fi Villa Door Station.

Dimensions (mm[inch])

Application

Connection

Connect the device to your Wi-Fi network for remote access and functionality.

Functionality

Utilize the device for two-way audio communication, unlocking doors remotely, card access control, and video monitoring.

Settings

Adjust video resolution, audio settings, and other configurations through the web interface or mobile app.

Ordering Information

Type Model Description
VTO DHI-VTO2211GWP-S2 IP & Wi-Fi Villa Door Station

FAQs

Q: How can I reset the device?
A: To reset the device, press and hold the reset button for 10 seconds until the device restarts.

Q: Can I use the device with multiple indoor monitors?
A: Yes, the device supports connectivity with multiple indoor monitors for extended coverage.

Rev 002.000 2023 Dahua. All rights reserved. Design and specifications are subject to change without notice.
The images, specifications, and information mentioned in the document are only for reference and might differ from the actual product.