PHILIPS GreenSpace Downlight Owner’s Manual

September 4, 2024
Philips

Lighting
GreenSpace
DN470T LED20S/830 PSU D22H16 3C GR
Owner’s Manual

GreenSpace Downlight

GreenSpace, 19.2 W, 2100 lm, 3000 K
Customers want to strike the ideal balance between their initial investment and the cost of the installation during its lifetime. GreenSpace is a cost- efficient and sustainable downlight that can be used to replace conventional CFL downlights in general lighting applications. It features the latest LED technology, which enables extremely low power consumption, while delivering consistent light output, stable colour performance and high colour rendering. The product’s long lifetime makes it a true ‘fit and forget’ solution.

Product data

General Information

Lamp family code LED20S [LED Module, system flux 2000 lm]
Cap base – [-]
Light source replaceable No
Number of gear units Unit
Driver included Yes
Lighting Technology LED
Value ladder Specification
CE mark Yes
Warranty period 5 years
Flammability mark For mounting on normally flammable surfaces
ENEC mark ENEC mark
Glow-wire test Temperature 650 °C, duration 5 s
EU RoHS compliant Yes

Light Technical

Luminous Flux 2,100 lm
Correlated Colour Temperature 3000 K
Luminous efficacy (rated) (nom.) 110 lm/W
Colour rendering index (CRI) >80
Light source colour 830 warm white
Optic type
Luminaire light beam spread 88°
Unified Glare Rating (CEN) 22

Operating and Electrical

Input Voltage 220 to 240 V
Line Frequency 50 to 60 Hz
Inrush current 18 A
Inrush time 0.250 ms
Power Consumption 19.2 W
Power Factor (Fraction) 0.9
Connection Connection unit 3-pole
Cable
Number of products on MCB of 16 A type B 34

Temperature

Ambient temperature range +10 to +40 °C

Controls and Dimming

Dimmable No
Driver/power unit/transformer Power supply unit (On/Off)
Constant light output No

Mechanical and Housing

Housing material Plastic
Reflector material Aluminium and polycarbonate
Optic material
Optical cover/lens material
Fixation material
Housing Colour Grey
Optical cover/lens finish
Overall height 208 mm
Overall diameter 218 mm

Approval and Application

Ingress protection code IP20 [Finger-protected]
Mech. impact protection code IK02 [0.2 J standard]
Protection class IEC Safety class II

Initial Performance (IEC Compliant)

Luminous flux tolerance +/-10%

Dimensional drawing

Initial chromaticity (0.43, 0.40) SDCM<3
Power consumption tolerance +/-10%

Over Time Performance (IEC Compliant)

Driver failure rate at 5,000 hours 1%
Control gear failure rate at median useful life 50,000 h 5%
Lumen maintenance at median useful life* 50,000 h L90
Lumen maintenance at median useful life* 100,000 h L80

Application Conditions

Performance ambient temperature Tq 25 °C
Suitable for random switching Not applicable

Product Data

Order product name DN470T LED20S/830 PSU D22H16 3C GR
Full product name DN470T LED20S/830 PSU D22H16 3C GR
Full EOC 871869938955000
Order code 38955000
Material no. (12 NC) 912500100275
SAP numerator – quantity per pack 1
EAN/UPC — Product/Case 8718699389550
Numerator – packs per outer box 1
EAN/UPC – Case 8718699389550

© 2023 Signify Holding All rights reserved. Signify does not give any representation or warranty as to the accuracy or completeness of the information included herein and shall not be liable for any action in reliance thereon. The information presented in this document is not intended as any commercial offer and does not form part of any quotation or contract, unless otherwise agreed by Signify. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V.

www.lighting.philips.com
2023, April 30 – data subject to change

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals